A New Series of EDOT Based Co-Sensitizers for Enhanced Efficiency of Cocktail DSSC: A Comparative Study of Two Different Anchoring Groups

A novel flavonoid and other constituents from Rubus rosifolius S.Vidal (Rosaceae)

Various reports revealed that chemical constituents from many species of Rubus exhibit diverse biological activities. In this study, a novel flavonoid with a 2-(phenanthren-9-yl)-4H-chromen-4-one structure (1), a 5-phenylthiophene-2-carbaldehyde derivative (5) first isolated from a natural source, together with five known compounds including three polyketides (2-4) and two sesquiterpenoids (6-7) were isolated from a traditional Chinese medicine Rubus rosifolius S.Vidal (Rosaceae). The structures of new compounds were elucidated by detailed spectroscopic analysis including NMR and X-ray single-crystal diffraction. The bioassays results indicated that, compound 1 displayed significant cytotoxicity against human colon cancer cell line HCT116 with IC50 value of 8.6 ± 1.9 μM, and compound 5 exhibited moderate cytotoxicity against human breast cancer cell line MDA-MB-435 with IC50 value of 24.1 ± 0.8 μM.

Design and Exploration by Quantum Chemical Analysis of Photosensitizers Having [D-π-π-A]- and [D-D-triad-A]-Type Molecular Structure Models for DSSC

Density functional theory (DFT) calculations are performed on the newly developed and designed photosensitizers having [D-D-triad-A]- and [D-π-π-A]-type structural models for near-infrared absorption dye-sensitized solar cells (DSSCs). For this purpose, three novel molecules are designed, which are named as follows: [naphthalene-anthracene-thiophene-furan-benzonitrile] as dye S1, [coronene-anthracene-thiophene-furan-benzonitrile] as dye S2, and [fluorene-thiophene-furan-benzonitrile] as dye S3. In all three systems, benzonitrile is the acceptor moiety, while thiophene and furan are bridging moieties. Naphthalene and anthracene are donor moieties in S1, whereas coronene and anthracene are donor moieties in S2, and fluorene is the only single donor moiety used for designing the dye complex S3. All three dye complexes are optimized under the DFT framework by using the B3LYP hybrid functional with 6-31G(d,p) basis set on Gaussian 16W software. The absorption spectra are calculated utilizing time-dependent density functional theory (TD-DFT) with the CAM-B3LYP/6-31G(d,p) basis set. The calculated absorption maxima of S1 and S2 are 749.45 and 750.04 nm, respectively, while for S3, it is reported to be at 337.35 nm, which suggests that the designed molecular structure having a double-donor moiety is suitable for high absorption wavelength. Further, the analysis of frontier molecular orbital energy gap suggests that the molecular systems S1, S2, and S3 have values 2.17, 2.13, and 3.618 eV, respectively, which lie in the semiconducting region. The other parameters calculated for the photovoltaic performance are exciton binding energy, change in free energy of charge regeneration, change in free energy of charge injection, oscillator strength, light harvesting efficiency, and open-circuit voltage.

Role of rare-earth oxides, conjugated with [Formula: see text], in the enhancement of power conversion efficiency of dye sensitized solar cells (DSSCs)

Different rare-earth (RE) metal-oxides nano-particles (NPs) viz. Samarium (III) oxide (Sm2O3), Neodymium (III) oxide (Nd2O3), and Gadolinium (III) oxide (Gd2O3) were synthesized using co-precipitation route, and investigated by structural, optical, and morphological studies. Findings and supporting studies were presented to understand the role of RE-metal-oxides NPs as photo-anode material for dye sensitized solar cells (DSSCs) applications. Structural analysis of prepared RE-metaloxides, by X-ray diffraction (XRD), reveals the crystalline nature of the particles ranging from 24 to 37 nm. Morphological study by field emission scanning electron microscopy (FESEM) supports the crystalline nature in the nano range of the prepared RE-metal oxides particles. The observed d values of each sample support the growth of Gd2O3, Nd2O3, and Sm2O3 material. The band-gap of prepared material was estimated from the UV-VIS absorption data and Tauc relation. The observed band gap values are 3.55 eV, 3.31 eV, and 3.52 eV for Gd2O3, Nd2O3, and Sm2O3 respectively. These values are reasonably high compare to the bulk values, indicates the nanostructure formation. Optimized RE-metal oxides NPs employed in the form of TiO2 photo anode for the fabrication of DSSCs. FESEM confirms that the Gd2O3-based photo-anode shows more uniform and decent coverage with more porosity on the TiO2. The EIS measurements of prepared DSSCs also supported the improvement in the photovoltaic output for the modified photo-anode devices as cells with modified photo-anode exhibited less charge recombination at the photo-anode/dye/electrolyte interface with increased electron lifetime leading to improved device performance as compared to the unmodified-based DSSCs. The highest efficiency 5.51% was demonstrated by [Formula: see text]/[Formula: see text] photo-anode-based DSSCs compare to Sm2O3, and Nd2O3 activated photo-anode.

Co-Sensitization Effects of Indoline and Carbazole Dyes in Solar Cells and Their Neutral-Anion Equilibrium in Solution

Co-sensitization of two or more light-absorbing compounds on a TiO₂ surface has recently become one of the most successful strategies in the development of dye-sensitized solar cells (DSSCs). The specific structure of the dyes for DSSCs implies that they can partly exist in anionic forms in popular solvents used for sensitization. Our study concerns the above two issues being analyzed in detail using the example of the popular carbazole (MK2) and indoline (D205) dyes, studied by stationary absorption and emission, femtosecond transient absorption (in complete cells and in the solutions), current-voltage measurements, DFT and TD-DFT theoretical calculations. After the addition of D205 to DSSC with MK2, the fill factor of the cells was improved, and the electron recombination between TiO₂ and the dyes was blocked (observed on sub-nanosecond time scales). Thus, the active co-adsorbent can take the role of the typically used passive additive, like chenodeoxycholic acid. Evidence of the concentration-dependent equilibrium between neutral and anionic forms of dyes with different lifetimes was found in acetonitrile solutions (the best for sensitization), while in ethanol solution the dominant form was the anion (worse for sensitization). Our findings should help in better understanding the operation and optimization of DSSC.

Efficiency enhancement of ruthenium-based DSSCs employing A-π-D-π-A organic Co-sensitizers

A new bipyridyl Ru(ii) sensitizer incorporating triphenylamine and the 3,4-ethylenedioxythiophene (EDOT) ancillary ligand IMA5 was synthesized for dye-sensitized solar cells (DSSCs). The performance of these DSSCs has been enhanced via di-anchoring metal-free organic sensitizers, denoted IMA1-4, with structural motif A-π-D-π-A and incorporating phenyl-dibenzothiophene-phenyl (Ph-DBT-Ph) as the main building block but with different anchoring groups (A). These new organic sensitizers were well-characterized and used as efficient co-sensitizers. Their photophysical, electrochemical and photovoltaic properties were studied. Furthermore, molecular modeling studies using DFT calculations were used to investigate their suitability as effective sensitizers/co-sensitizers. The molecular orbital isodensity showed distinguishable delocalization of the intramolecular charge in the DBT moiety. The photovoltaic characterization showed that IMA3 had the best DSSC performance (η = 2.41%). In addition, IMA1-4 was co-sensitized in conjunction with the newly synthesized IMA5 complex to enhance light harvesting across expanded spectral regions and thus improve efficiency. The solar cells co-sensitized with IMA2, IMA3 and IMA4 exhibited improved efficiency (η) of 6.25, 6.19 and 5.83%, respectively, which outperformed the device employing IMA5 alone (η = 5.54%) owing to the improvement in the loading of IMA2, IMA3 and IMA4 in the presence of IMA5 on the surface of the TiO2 nanoparticles, and charge recombination was suppressed.

Evaluation of Neuroimaging Findings of Central Nervous System Complications in Heart Transplant Recipients

OBJECTIVES

In this study, we presented neuroradiologic findings and diagnoses of neurologic complications in a series of heart transplant recipients.

MATERIALS AND METHODS

A retrospective review was conducted at Başkent University Hospital. We searched the hospital and radiology databases and identified 109 heart transplant recipients. Thirty-one of these recipients had neuroradiologic evaluations secondary to presentation of neurologic symptoms after heart transplant, with 18 patients evaluated with computed tomography and 22 patients evaluated with magnetic resonance imaging (overlap of imaging-defined groups occurred in 9 recipients). Computed tomography and magnetic resonance imaging studies were retrieved from the Picture Archiving and Communication System, with each type of imaging retrospectively evaluated on consensus by 2 radiologists.

RESULTS

Radiopathologic findings related to symptoms were detected in 12 of the 31 study patients. The most common abnormality was posterior reversible leukoencephalopathy syndrome (5 patients, 4.6%). The other abnormalities were ischemic stroke (3 patients, 2.8%), hemorrhagic stroke (1 patient, 0.9%), intracranial abscess (2 patients, 1.8%), and intracranial dissemination of sinusoidal fungal infection and related hemorrhagic infarct (1 patient, 0.9%). The other 19 heart transplant recipients who underwent computed tomography and/or magnetic resonance imaging for neurologic complaints showed no neuroradiologic findings related to neurologic symptoms.

CONCLUSIONS

Posterior reversible leukoencephalopathy syndrome and ischemic stroke were the most common neurologic complications in our heart transplant recipients. The other complications were hemorrhagic stroke, intracranial abscess, and intracranial dissemination of sinusoidal fungal infection. Neurologic complications are common in heart transplant recipients and should be identified promptly for early treatment. For the recognition of these complications, computed tomography should be performed for initial evaluation to rule out edema or hemorrhage. However, in the presence of serious neurologic symptoms that cannot be explained by computed tomography, magnetic resonance imaging should be indicated.