High-Throughput 1H-Nuclear Magnetic Resonance-Based Screening for the Identification and Quantification of Heartwood Diterpenic Acids in Four Black Pine (Pinus nigra Arn.) Marginal Provenances in Greece

Rosin from Pinus pinaster Portuguese forests shows a regular profile of resin acids

Pinus pinaster forestry occupies >20% of the forest ecosystem area in the continental territory of Portugal with a high impact on the national economy. This species' major derived non-wood product is oleoresin, the raw material for rosin production. Rosin comprises mainly a blend of resin acids and has broad industrial and pharmaceutical applications. Oleoresin production in Portugal has been progressively reduced due to low-cost producers in other countries; currently, it reaches only 2% of the existing P. pinaster trees. To support this value chain, the chemical fingerprint of rosin derived from the national forest requires focused analysis. In the present study, we collected oleoresin within seven geographically distinct pure P. pinaster forests in two consecutive collection years. A high-resolution nuclear magnetic resonance (NMR) method was used to quantify the diversity of resin acids in the corresponding rosin samples. Overall, the acquired data highlighted that the profile of resin acids in P. pinaster rosin produced in Portugal is highly regular, regardless of the forest location, having as the major constituents abietic acid and dehydroabietic acid. The diversity of resin acids is possibly influenced, to a minor extent, by some edaphoclimatic factors.

The Role of Ingenane Diterpenes in Cancer Therapy: From Bioactive Secondary Compounds to Small Molecules

Diterpenes are a class of critical taxonomic markers of the Euphorbiaceae family, representing small compounds (eg, molecules) with a wide range of biological activities and multi-target therapeutic potential. Diterpenes can exert different activities, including antitumor and multi-drug resistance-reversing activities, and antiviral, immunomodulatory, and anti-inflammatory effects, mainly due to their great structural diversity. In particular, one polycyclic skeleton has been highlighted: ingenane. Besides this natural diterpene, promising polycyclic skeletons may be submitted to chemical modification—by in silico approaches, chemical reactions, or biotransformation—putatively providing more active analogs (eg, ingenol derivatives), which are currently under pre-clinical investigation. This review outlines the current mechanisms of action and potential therapeutic implications of ingenol diterpenes as small cancer molecules.

Phytochemical, Antiplasmodial, Cytotoxic and Antimicrobial Evaluation of a Southeast Brazilian Brown Propolis Produced by Apis mellifera Bees

Seven phenolic compounds (ferulic acid, caffeic acid, 4-methoxycinnamic acid, 3,4-dimethoxycinnamic acid, 3-hydroxy-4-methoxybenzaldehyde, 3-methoxy-4-hydroxypropiophenone and 1-O,2-O-digalloyl-6-O-trans-p-coumaroyl-β-D-glucopyranoside), a flavanonol (7-O-methylaromadendrin), two lignans (pinoresinol and matairesinol) and six diterpenic acids/alcohol (19-acetoxy-13-hydroxyabda-8(17),14-diene, totarol, 7-oxodehydroabietic acid, dehydroabietic acid, communic acid and isopimaric acid) were isolated from the hydroalcoholic extract of a Brazilian Brown Propolis and characterized by NMR spectral data analysis. The volatile fraction of brown propolis was characterized by CG-MS, composed mainly of monoterpenes and sesquiterpenes, being the major α-pinene (18.4 %) and β-pinene (10.3 %). This propolis chemical profile indicates that Pinus spp., Eucalyptus spp. and Araucaria angustifolia might be its primary plants source. The brown propolis displayed significant activity against Plasmodium falciparum D6 and W2 strains with IC₅₀ of 5.3 and 9.7 μg/mL, respectively. The volatile fraction was also active with IC₅₀ of 22.5 and 41.8 μg/mL, respectively. Among the compounds, 1-O,2-O-digalloyl-6-O-trans-p-coumaroyl-β-D-glucopyranoside showed IC₅₀ of 3.1 and 1.0 μg/mL against D6 and W2 strains, respectively, while communic acid showed an IC₅₀ of 4.0 μg/mL against W2 strain. Cytotoxicity was determined on four tumor cell lines (SK-MEL, KB, BT-549, and SK-OV-3) and two normal renal cell lines (LLC-PK1 and VERO). Matairesinol, 7-O-methylaromadendrin, and isopimaric acid showed an IC₅₀ range of 1.8-0.78 μg/mL, 7.3-100 μg/mL, and 17-18 μg/mL, respectively, against the tumor cell lines but they were not cytotoxic against normal cell lines. The crude extract of brown propolis displayed antimicrobial activity against C. neoformans, methicillin-resistant Staphylococcus aureus, and P. aeruginosa at 29.9 μg/mL, 178.9 μg/mL, and 160.7 μg/mL, respectively. The volatile fraction inhibited the growth of C. neoformans at 53.0 μg/mL. The compounds 3-hydroxy-4-methoxybenzaldehyde, 3-methoxy-4-hydroxypropiophenone and 7-oxodehydroabietic acid were active against C. neoformans, and caffeic and communic acids were active against methicillin-resistant Staphylococcus aureus.

Biotechnological Approaches on Two High CBD and CBG Cannabis sativa L. (Cannabaceae) Varieties: In Vitro Regeneration and Phytochemical Consistency Evaluation of Micropropagated Plants Using Quantitative 1H-NMR

High cannabidiol (CBD) and cannabigerol (CBG) varieties of Cannabis sativa L., a species with medicinal properties, were regenerated in vitro. Explants of nodal segments including healthy axillary bud, after sterilization, were placed in Murashige-Skoog (MS) culture medium. The shoots formed after 30 days were subcultured in full- or half-strength MS medium supplemented with several concentrations of 6-benzyl-amino-purine (BA) or thidiazuron (TDZ). The highest average number and length of shoots was achieved when both full and half-strength MS media were supplemented with 4.0 μM BA. The presence of 4.0 μM TDZ showed also comparable results. BA and TDZ at concentrations of 4.0, 8.0 μM and 2.0, 4.0 μM respectively, displayed the maximum shooting frequency. The new shoots were transferred on the same media and were either self-rooted or after being enhanced with different concentrations of indole-3-butyric acid (IBA) or α-naphthalene acetic acid (NAA). Presence of 2.0 or 4.0 μM IBA or 4.0 μM NAA resulted to the optimum rooting rates. The maximum average number and length of roots per shoot was observed when the culture media was supplemented with 4.0 μM IBA or NAA. Approximately 92% of the plantlets were successfully established and acclimatized in field. The consistency of the chemical profile of the acclimatized in vitro propagated clones was assessed using quantitative 1H-NMR high throughput screening. In each variety, analysis of the micropropagated plant in comparison with the mother plant showed no statistically significant differences (p ≤ 0.05) in CBD+ cannabidiolic acid (CBDA) and CBG+ cannabigerolic acid (CBGA) content respectively, thus indicating stability of their chemical profile.

Volatile Organic Compounds (VOCs) from Wood and Wood-Based Panels: Methods for Evaluation, Potential Health Risks, and Mitigation

Volatile organic compounds (VOCs) are contained in various construction materials and interior equipment. Their higher concentrations in the indoor air are associated with negative effects on human health and are disputed in terms of health risk, since people spend a considerable part of their lifetime indoors. Therefore, the presence of VOCs in indoor air is a case of concern regarding sick building syndrome (SBS). From a historical point of view, wood and wood-based panels represent a widely used material. Nevertheless, wood appears to be nowadays a product and a material of a sustainable future. Depending on wood extractives’ composition and an abundance of diverse wood species, different profiles of volatiles are emitted. In case of wood-based panels, the impact of adhesives and additives that are essentially applied aiming to adjust the panels’ properties is even enriching this cocktail of chemicals. This paper comprises the issue of VOCs emitted from wood and wood-based panels. The most abundant VOCs were summarized. The options of VOCs for analytical determination from these matrixes are described with their benefits and limitations.

Mass spectrometry imaging as a potential technique for diagnostic of Huanglongbing disease using fast and simple sample preparation

Huanglongbing (HLB) is a disease of worldwide incidence that affects orange trees, among other commercial varieties, implicating in great losses to the citrus industry. The disease is transmitted through Diaphorina citri vector, which inoculates Candidatus Liberibacter spp. in the plant sap. HLB disease lead to blotchy mottle and fruit deformation, among other characteristic symptoms, which induce fruit drop and affect negatively the juice quality. Nowadays, the disease is controlled by eradication of sick, symptomatic plants, coupled with psyllid control. Polymerase chain reaction (PCR) is the technique most used to diagnose the disease; however, this methodology involves high cost and extensive sample preparation. Mass spectrometry imaging (MSI) technique is a fast and easily handled sample analysis that, in the case of Huanglongbing allows the detection of increased concentration of metabolites associated to the disease, including quinic acid, phenylalanine, nobiletin and sucrose. The metabolites abieta-8,11,13-trien-18-oic acid, suggested by global natural product social molecular networking (GNPS) analysis, and 4-acetyl-1-methylcyclohexene showed a higher distribution in symptomatic leaves and have been directly associated to HLB disease. Desorption electrospray ionization coupled to mass spectrometry imaging (DESI-MSI) allows the rapid and efficient detection of biomarkers in sweet oranges infected with Candidatus Liberibacter asiaticus and can be developed into a real-time, fast-diagnostic technique.

New Insights to Characterize Paint Varnishes and to Study Water in Paintings by Nuclear Magnetic Resonance Spectroscopy (NMR)

Paintings are complex multi-layered systems made of organic and inorganic materials. Several factors can affect the degradation of paintings, such as environmental conditions, past restoration works and, finally, the type of painting technique and the art materials used over the centuries. The chemical–physical characterization of paintings is a constant challenge that requires research into and the development of novel analytical methodologies and processes. In recent years, solvents and water-related issues in paintings are attracting more attention, and several studies have been focused on analyzing the interaction between water molecules and the constitutive materials. In this study, recent applications applying different NMR methodologies were shown, highlighting the weakness and the strength of the techniques in analyzing paintings. In particular, the study of water and its diffusive interactions within wall and oil paintings was performed to prove how the portable NMR can be used directly in museums for planning restoration work and to monitor the degradation processes. Furthermore, some preliminary results on the analysis of varnishes and binders, such us linseed oil, shellac, sandarac and colophony resins, were obtained by 1H HR-MAS NMR spectroscopy, highlighting the weakness and strengths of this technique in the field of conservation science.

Pine rosin identified as a toxic cannabis extract adulterant

Pine rosin (colophony) has been identified as a potentially new adulterant in cannabis oil. Its inhalation toxicity poses a significant health concern to users. For example, pine rosin fumes are released during soldering, and have been cited as a causative agent of occupational asthma. Symptoms also include desquamation of bronchial epithelium, which has also been observed in e-cigarette or vaping product used-associated lung injury (EVALI) patients. The sample analyzed herein was acquired from a cannabis industry source, also contains medium chain triglycerides and oleamide, the latter of which is a hypnotic that is commonly found in the synthetic marijuana product Spice, or K2. A combination of proton nuclear magnetic resonance (¹H NMR) and high pressure liquid chromatography-electrospray ionization mass spectrometry (HPLC-ESIMS) was used to unambiguously identify major pine rosin ingredients such as abietic and other resin acids. Comparison to commercial samples of pure pine rosin confirmed the assignment.