Preparation of Chitosan Molecularly Imprinted Polymers and the Recognition Mechanism for Adsorption of Alpha-Lipoic Acid

[Recent advances in the applications of metal-organic frameworks-based molecularly imprinted materials]

Molecularly imprinted polymers have received wide attention from various fields owing to their pre-designable, recognition ability, and practicality. However, the disadvantages of the traditional embedding method, which include a slow recognition rate, uneven site recognition, low binding capacity, and incomplete template molecule elution, limit the development of molecular imprinting technology. Surface molecular imprinting techniques have been developed to effectively solve these problems, and different materials are used as carriers in the synthesis of molecularly imprinted polymers. Metal-organic frameworks (MOFs) show great potential as carriers. Because of their high porosity and specific surface area, MOFs can provide a large number of active sites for molecular imprinting, which can improve their detection sensitivity. The variable metal centers and organic ligands of MOF materials can also lead to multiple structures and functions. Numerous types of MOF materials have been synthesized, and the properties of these materials can be tailored by adjusting their pore size and introducing functional groups. MOFs and molecular imprinting technology can be combined to take full advantage of the specific adsorption of molecular imprinting technology and the large specific surface area and multiple active sites of MOFs, thereby expanding the application range of the resulting materials. In this paper, five aspects of the concept of MOF functionalization are discussed: introduction of special ligands, regulation of metal central sites, formation of MOF complexes, derivatization of MOFs, and sacrificial MOFs. The applications of MOF-based molecularly imprinted materials in catalysis, sample pretreatment, drug carriers, fluorescence sensors, and electrochemical sensors are also reviewed. Finally, the existing problems and future development of MOF-based molecularly imprinted materials are discussed and prospected.

From the problem to the solution: Chitosan valorization cycle

The problem of fisheries waste has increased in recent years and has become a global problem influenced by various biological, technical, operational and socioeconomic factors. In this context, the use of these residues as raw materials is a proven approach not only to reduce the crisis of unprecedented magnitude facing the oceans, but also to improve the management of marine resources and increase the competitiveness of the fisheries sector. However, the implementation of valorization strategies at the industrial level is being excessively slow, despite this great potential. Chitosan, a biopolymer extracted from shellfish waste, is a clear example of this because although countless chitosan-based products have been described for a wide variety of applications, commercial products are still limited. To address this drawback, it is essential to consolidate a "bluer" chitosan valorization cycle towards sustainability and circular economy. In this perspective we wanted to focus on the cycle of valorization of chitin, which allows to transform a waste product (chitin) into a material suitable for the development of useful products to solve the source of its origin as a waste product and pollutant; chitosan-based membranes for wastewater remediation.

Application of Chitosan-Based Molecularly Imprinted Polymer in Development of Electrochemical Sensor for p-Aminophenol Determination

Molecularly Imprinted Polymers (MIPs) have specific recognition capabilities and have been widely used for electrochemical sensors with high selectivity. In this study, an electrochemical sensor was developed for the determination of p-aminophenol (p-AP) by modifying the screen-printed carbon electrode (SPCE) with chitosan-based MIP. The MIP was made from p-AP as a template, chitosan (CH) as a base polymer, and glutaraldehyde and sodium tripolyphosphate as the crosslinkers. MIP characterization was conducted based on membrane surface morphology, FT-IR spectrum, and electrochemical properties of the modified SPCE. The results showed that the MIP was able to selectively accumulate analytes on the electrode surface, in which MIP with glutaraldehyde as a crosslinker was able to increase the signal. Under optimum conditions, the anodic peak current from the sensor increased linearly in the range of 0.5-35 µM p-AP concentration, with sensitivity of (3.6 ± 0.1) µA/µM, detection limit (S/N = 3) of (2.1 ± 0.1) µM, and quantification limit of (7.5 ± 0.1) µM. In addition, the developed sensor exhibited high selectivity with an accuracy of (94.11 ± 0.01)%.

Electrospun molecularly imprinted sodium alginate/polyethylene oxide nanofibrous membranes for selective adsorption of methylene blue

Molecular imprinting technique is an efficient method to improve the selective adsorption capacity for the target pollutant. In this study, sodium alginate/polyethylene oxide molecularly imprinted nanofibrous membrane (SA/PEO-MINM) with average diameter of 185 ± 20 nm was successfully synthesized by electrospinning for selective adsorption of methylene blue (MB). Benefiting from the molecular imprinted technology, the adsorption amount of SA/PEO-MINM for MB was increased by about 65%, significantly higher than the non-imprinted membrane. Results showed that the adsorption equilibrium could be well fitted with Langmuir isotherm model and the maximum adsorption capacity towards MB was 3186.7 mg/g. Kinetic experiments well complied with the Pseudo second order model. Reusability studies indicated that the removal efficiency of MB could maintain 93% of the original adsorption capacity after four consecutive adsorption/desorption cycles. More importantly, the SA/PEO-MINM with high surface area and specific adsorption recognition sites showed excellent selective adsorption capacity in the adsorption experiment of MB and methylene orange mixed dye solution. In general, the SA/PEO-MINM can be successfully applied for the selective removal of MB from dye wastewater.

Enantioselective chitosan-based racemic ketoprofen imprinted polymer: Chiral recognition and resolution study

This work presented a novel racemic imprinting process employing the chiral properties of chitosan monomer. The preparation of racemic ketoprofen (RS-KTP) imprinted polymer (RS-MIP) was conducted using glutaraldehyde as a crosslinker. The nature of elution solvent affected the % desorption ratio suggesting a heterogenous nature of the formed binding sites. Good imprinting was indicated by an imprinting factor of 3.50 for S-KTP. The enantioselectivity of the RS-MIP was indicated by enantioselectivity coefficient of 2.31 and % enantiomeric excess (%ee) of 28.55%. A SPE cartridge packed with RS-MIP enabled resolution of RS-KTP using gradient elution solvent system. Scatchard plot revealed two binding sites types of different affinity towards S-KTP and density observed for the RS-MIP. The binding capacity of RS-MIP showed observed dependence on the % ee of S-KTP indicating its enantioselectivity. The success of using racemic template for the preparation of enantioselective MIP brings a new possibility to achieve enantioseparation of racemic mixtures having very expensive or unavailable pure enantiomers.

Photonic Crystal-Embedded Molecularly Imprinted Contact Lenses for Controlled Drug Release

As a noninvasive eye disease detection and drug delivery device, contact lenses can improve eye bioavailability and enable continuous drug delivery. In order to monitor the release of drugs in real time, molecularly imprinted contact lenses (MICLs) based on photonic crystals (PCs) were prepared for the treatment of diabetes-related diseases. The specific adsorption of molecularly imprinted polymers on dexamethasone sodium phosphate (DSP) increased the drug loading and optimized the drug release behavior. At the same time, the drug release ensures the rapid color report during the loading and releasing of drugs due to the volume and refractive index change of the hydrogel matrix. The continuous and slow release of DSP by MICLs in artificial tears was successfully monitored through structural color changes, and the cytotoxicity test results showed that the MICL had good biocompatibility. Therefore, MICLs with a PC structure color have great biomedical potentiality in the future.

The Use of Computational Methods for the Development of Molecularly Imprinted Polymers

Recent years have witnessed a dramatic increase in the use of theoretical and computational approaches in the study and development of molecular imprinting systems. These tools are being used to either improve understanding of the mechanisms underlying the function of molecular imprinting systems or for the design of new systems. Here, we present an overview of the literature describing the application of theoretical and computational techniques to the different stages of the molecular imprinting process (pre-polymerization mixture, polymerization process and ligand-molecularly imprinted polymer rebinding), along with an analysis of trends within and the current status of this aspect of the molecular imprinting field.

A mesoporous melamine/chitosan/activated carbon biocomposite: Preparation, characterization and its application for Ni (II) uptake via ion imprinting

A novel imprinted biocomposite and its non-imprinted form were developed by melaminating and crosslinking of chitosan coated onto a bio-based activated carbon and characterized using FTIR, BET, FESEM-EDS and XRD. Nickel, 4-Toluenesulfonyl chloride, and glutaraldehyde were used as a template, converter of hydroxyl and amine groups to good leaving groups, and cross-linker, respectively. The factors affecting adsorptivity and imprinting factor were optimized by using the Taguchi method for the subsequent comparative adsorptivity, kinetics, isotherms, selectivity, and reusability studies of imprinted biocomposite with its non-imprinted one. The pseudo-first-order and Langmuir models were best fitted to the experimental kinetics and equilibrium isotherm data, respectively. The maximum Ni (II)) adsorptivity of 109.86 mg/g, the imprinting factor (I·F) of 5.45 and Ni (II) selectivity coefficients values of 3.13, 4.48, 3.72, 2.51 for Ni (II) toward Zn (II), Cd (II), Cu (II) and Pb (II), respectively, were obtained at optimum conditions. After five consecutive adsorption-desorption cycles, the biocomposites still presented a high adsorptivity (>83%), indicating their excellent reusability.

Application of selective polymeric sorbents for simple coumarins extraction from deodorant samples

Coumarins (2H-1-benzopyran-2-coumarin derivatives) are derivatives of cinnamic acid naturally occurring in many plants, fungi, and fruits. They are used as ingredients in cosmetics to enhance the aroma and other biological effects. In this work, cosmetic samples (deodorants) were treated by solid phase extraction prior to high performance liquid chromatography determination of coumarins. Traditional sorbent (C18) and selective polymer-based sorbents (laboratory prepared and commercial) were used for solid phase extraction. Recovery values were above 85 % (RSDs below 6 %) except for esculin, where the recovery was lower. Core-shell column of C18 type and gradient of mobile phase methanol—1 % acetic acid were used for high performance liquid chromatography analysis of extracts. Limits of quantitation were 0.5 µg mL−1 for coumarin (ultraviolet detection) and below 12 ng mL−1 for esculin, umbelliferonene, scoparone, 4-methylumbelliferone, herniarin (fluorescence detection). In the tested samples, no coumarins were detected.