Synthesis of Biologically Active Molecules through Multicomponent Reactions

Synthesis of nicotinimidamides via a tandem CuAAC/ring-cleavage /cyclization/oxidation four-component reaction and their cytotoxicity

Nicotinamide and its derivatives, recognized as crucial drug intermediates, have been a focal point of extensive chemical modifications and rigorous pharmacological studies. Herein, a series of novel nicotinamide derivatives, nicotinimidamides, were synthesized via a tandem CuAAC/ring-cleavage/cyclization/oxidation four-component reaction procedure from O-acetyl oximes, terminal ynones, sulfonyl azides, and NH4OAc. This strategy is significantly more efficient than previously reported, and the cytotoxicity of the nicotinimidamides is also tested. This project not only exhibits a sustainable and eco-friendly domino methodology for the creation of nicotinimidamides but also presents a promising candidate for liver cancer treatment.

Cs2CO3-Promoted Alkylation of 3-Cyano-2(1H)-Pyridones: Anticancer Evaluation and Molecular Docking

Herein, a Cs2CO3-promoted N-alkylation of 3-cyano-2(1H)-pyridones containing alkyl groups with diverse alkyl halides to synthesize N-alkyl-2-pyridones over O-alkylpyridines is reported. The use of alkyl dihalides resulted in complex mixtures of N- and O-alkylated products. The primary factor influencing regioselectivity in these reactions is the electronic effects of substituents on the 2(1H)-pyridone ring, as evidenced by the preferential formation of O-alkylpyridines upon the introduction of aryl groups. Remarkably, we efficiently employed CuAAC and Ti(Oi-Pr)4-catalyzed amidation reactions to functionalize N-alkyl-2-pyridones containing propargyl and ester groups, leading to the synthesis of 1,2,3-triazoles and amides, respectively. Moreover, O-alkylpyridines 10 b and 10 d displayed remarkable selectivity toward the A-498 renal cancer cell line with growth inhibition percentages (%GI) of 54.75 and 67.64, respectively. The binding modes of compounds 10 b and 10 d to the PIM-1 kinase enzyme were determined through molecular docking studies.

Synthesis, characterization, and biological evaluation of novel cinnamic acid derivatives: cinnamoyl-metronidazole ester and cinnamoyl-memantine amide

In this study, two derivatives, namely the ester derivative cinnamoyl metronidazole and the amide derivative cinnamoyl memantine, were synthesized from cinnamic acid and respective drugs for the purpose of exploring their potential as novel and efficient antimicrobial agents in the quest of prevailing the global antimicrobial resistance challenge. The synthesis process involved two steps: first, the chlorination of cinnamic acid using thionyl chloride, and second, the esterification of metronidazole or the amidation of memantine. These steps resulted in the formation of cinnamoyl metronidazole/memantine. Optimal reaction conditions were established, and chromatographic techniques were used to separate the synthesized compounds. Confirmation of successful synthesis was achieved through FT-IR analysis, which readily distinguished the chlorinated product and derivatives based on distinctive bands, including mainly the one of carbonyl group. Additionally, molecular structures were validated using 1H NMR and 13C NMR, with all peaks further confirming the successful esterification/amidation of cinnamoyl and drug moieties. Upon evaluating the biological activity, the parent compounds exhibited negligible effects within the tested concentration range. However, the derivatives demonstrated significant activity. The ester derivative exhibited potent activity against the Gram-positive bacterium Staphylococcus aureus, as evidenced by a zone of inhibition measuring 12-15 mm in diameter. Conversely, the amide derivative displayed appreciable biological activity against Candida fungi, with an inhibition zone measuring 11-14 mm.

Hal-Py-SO3H as a novel and recyclable catalyst for highly efficient synthesis of xanthene and spiropyran derivatives

The aim of this research is to synthesize a new sulfonic acid catalyst based on halloysite nanotubes (Hal-Py-SO3H) and characterize it as a solid acid nanocatalyst by various analytical techniques such as Fourier-Transformed Infrared spectroscopy (FTIR), Thermal gravimetric Analysis (TGA), X-ray Diffraction (XRD) analysis, Scanning Electron Microscopy (SEM), Vibrating Energy-Dispersive X-ray analysis (EDX), Transmission electron microscopy (TEM) and X-ray atomic mapping. Furthermore, this new catalyst was evaluated in synthesizing spiropyran derivatives via multicomponent reactions (MCRs) and Xanthen derivatives under environmentally sustainable conditions. The main advantages of this approach include green conditions, excellent yields, quick reaction rates, and ease of preparation. Additionally it was observed that the catalyst exhibited robust stability even after multiple recycling processes, indicating its potential for practical applications in sustainable chemical transformations.

Novel benzochromenes: design, synthesis, cytotoxicity, molecular docking and mechanistic investigations

Aim: A novel series of fused benzochromenes with expected cytotoxicity and HIF-1α inhibition was identified. Materials & methods: A bioisosterism-aided approach was applied to design new benzochromenes and assess their cytotoxicity against three cancer cell lines. The probable mechanistic effect and the in silico docking and pharmacokinetic profiles of the most effective derivatives were evaluated. Results: Compounds 3, 4, 5, 8 and 11 showed potent antiproliferative activity and excellent selectivity. Compound 8 showed significant HIF-1α inhibition with an IC50 value of 3.372 μM. It also enhanced apoptosis and arrested the HepG2 cell cycle at both the G0/G1 and S stages. Conclusion: Compound 8 was identified as a new potential anticancer candidate.

Multicomponent Synthesis of 4-Aryl-4,9-dihydro-1H-pyrazolo[3,4-b]quinolines Using L-Proline as a Catalyst-Does It Really Proceed?

Looking for effective synthetic methods for 1H-pyrazolo[3,4-b]quinolines preparation, we came across a procedure where, in a three-component reaction catalysed by L-proline, 4-aryl-4,9-dihydro-1H-pyrazolo[3,4-b]quinolines are formed. These compounds can be easily oxidised to a fully aromatic system, which gives hope for a synthetic method that could replace, e.g., Friedländer condensation, often used for this purpose, even though severely limited by the availability of suitable substrates. However, after careful repetition of the procedures described in the publication, it turned out that the compounds described therein do not form at all. The actual compounds turned out to be 4,4-(phenyl-methylene)-bis-(3-methyl-1-phenylpyrazol-5-oles). Therefore, 4-Aryl-4,9-dihydro-1H-pyrazolo[3,4-b]quinolines were prepared by another method and used as standards to compare the products formed in the original procedure.

NiFe2O4@SiO2-Cu as a novel and efficient magnetically recoverable nanocatalyst for regioselective synthesis of β-thiol-1,2,3-triazoles under benign conditions

A green, mild and eco-friendly approach for the three component one-pot regioselective synthesis of 1,2,3-triazoles from thiiranes has been introduced in the presence of NiFe2O4@SiO2-Cu as a new and recoverable nanocatalyst. First, the NiFe2O4 nanoparticles have been produced through a solid-state reaction of hydrated nickel sulfate, hydrated iron(iii) nitrate, NaOH and NaCl salts, and then calcined at 700 °C. Next, in order to protect the ferrite particles from oxidation and aggregation, the NiFe2O4 was core-shelled using tetraethyl orthosilicate (TEOS) and converted to NiFe2O4@SiO2. Finally, the novel NiFe2O4@SiO2-Cu nanocomposite was successfully prepared by adding copper(ii) chloride solution and solid potassium borohydride. The catalyst has been characterized by FT-IR, SEM, EDX, VSM, ICP-OES, TEM and XRD techniques. The 1,3-dipolar cyclization of 1,2,3-triazoles was performed successfully in water at room temperature in high yields. The recoverability and reusability of the heterogeneous NiFe2O4@SiO2-Cu have also been investigated using VSM, SEM and FT-IR analyses. The catalyst was used four times in consecutive runs without considerable loss of activity. The presented procedure provides significant benefits such as using water as a green solvent, absence of hazardous organic solvents, high yields, benign conditions and recyclability of the magnetic catalyst.

Synthesis and Biological Studies of Benzo[b]furan Derivatives: A Review from 2011 to 2022

The importance of the benzo[b]furan motif becomes evident in the remarkable results of numerous biological investigations, establishing its potential as a robust therapeutic option. This review presents an overview of the synthesis of and exhaustive biological studies conducted on benzo[b]furan derivatives from 2011 to 2022, accentuating their exceptional promise as anticancer, antibacterial, and antifungal agents. Initially, the discussion focuses on chemical synthesis, molecular docking simulations, and both in vitro and in vivo studies. Additionally, we provide an analysis of the intricate interplay between structure and activity, thereby facilitating comparisons and profoundly emphasizing the applications of the benzo[b]furan motif within the realms of drug discovery and medicinal chemistry.

Diastereoselective multicomponent synthesis of dihydroisoindolo[2,1-a]quinolin-11-ones mediated by eutectic solvents

In this contribution, a series of dihydroisoindolo[2,1-a]quinolin-11-ones was synthesized by a one-pot multicomponent Povarov reaction starting from anilines, alkenes (trans-anethole, methyl eugenol and indene) and 2-formylbenzoic acid. Different eutectic solvents bearing Lewis or Brønsted acids were evaluated as reaction media and catalysts for the model reaction employing p-toluidine and trans-anethole finding that the eutectic mixture ChCl/ZnCl2 (1/2) allowed the obtention of the target compound in 77% isolated yield. Under the optimized reaction conditions, 20 derivatives were obtained in good to moderated yields using meta- and para-susbstituted anilines, while the corresponding ortho-analogs followed a different pathway affording isoindolinones. In addition, the eutectic mixture was reused in six cycles without observing a detrimental catalytic activity. This methodology features mild reaction conditions, short reaction time, simple work-up, and utilization of a reusable solvent; and provides straightforward and diastereoselective access to these alkaloid-like heterocyclic molecules.

Substrate-Controlled Three-Component Synthesis of Diverse Fused Heterocycles

A chemoselective strategy toward a variety of fused heterocyclic scaffolds relying on a three-component condensation of heterocyclic ketene aminals (HKAs) or corresponding thioaminals with aryl glyoxals and cyclic 1,3-dicarbonyl compounds has been developed and explored. Depending on the applied combination of substrates, the strategy can be tuned to provide straightforward access to imidazo[1,2-a]quinoline, pyrrolo[1,2-a]imidazole, and pyrrolo[2,1-b]thiazole frameworks.

Galactoside-Based Molecule Enhanced Antimicrobial Activity through Acyl Moiety Incorporation: Synthesis and In Silico Exploration for Therapeutic Target

In this study, a series of galactoside-based molecules, compounds of methyl β-d-galactopyranoside (MDGP, 1), were selectively acylated using 2-bromobenzoyl chloride to obtain 6-O-(2-bromobenzoyl) substitution products, which were then transformed into 2,3,4-tri-O-6-(2-bromobenzoyl) compounds (2-7) with various nontraditional acyl substituents. The chemical structures of the synthesized analogs were characterized by spectroscopic methods and physicochemical and elemental data analyses. The antimicrobial activities of the compounds against five human pathogenic bacteria and two phyto-fungi were evaluated in vitro and it was found that the acyl moiety-induced synthesized analogs exhibited varying levels of antibacterial activity against different bacteria, with compounds 3 and 6 exhibiting broad-spectrum activity and compounds 2 and 5 exhibiting activity against specific bacteria. Compounds 3 and 6 were tested for MIC (minimum inhibitory concentration) and MBC (minimum bactericidal concentration) based on their activity. The synthesized analogs were also found to have potential as a source of new antibacterial agents, particularly against gram-positive bacteria. The antifungal results suggested that the synthesized analogs could be a potential source of novel antifungal agents. Moreover, cytotoxicity testing revealed that the compounds are less toxic. A structure-activity relationship (SAR) investigation revealed that the lauroyl chain [CH₃(CH₂)₁₀CO-] and the halo-aromatic chain [3(/4)-Cl.C₆H₄CO-] in combination with sugar, had the most potent activity against bacterial and fungal pathogens. Density functional theory (DFT)-calculated thermodynamic and physicochemical parameters, and molecular docking, showed that the synthesized molecule may block dengue virus 1 NS2B/NS3 protease (3L6P). A 150 ns molecular dynamic simulation indicated stable conformation and binding patterns in a stimulating environment. In silico ADMET calculations suggested that the designed (MDGP, 1) had good drug-likeness values. In summary, the newly synthesized MDGP analogs exhibit potential antiviral activity and could serve as a therapeutic target for dengue virus 1 NS2B/NS3 protease.

Copper borate (CuB4O7)-promoted multi-component green synthesis of 2,4,5-triarylimidazole derivatives and evidence of in situ conversion of copper borate (CuB4O7) into Cu(OAc)2 in the presence of NH4OAc

A green, efficient, and straightforward methodology for the three-component synthesis of 2,4,5-triarylimidazole has been developed under solvent-free conditions using unconventional CuB₄O₇ as a promoter. This green approach encouragingly provides access to a library of 2,4,5-tri-arylimidazole. Also, we have been able to isolate the compound (5) and (6) in situ, which provides an insight into the direct conversion of CuB₄O₇ into copper acetate in the presence of NH₄OAc under solvent-free condition. The main advantage of this protocol includes an easy reaction procedure, short reaction time, and easy work up of the product without using any tedious separation method.

Multicomponent Reactions Using C,N-Binucleophilic Nature of Aminopyrazoles: Construction of Pyrazole-Fused Heterocycles

Synthesis of pyrazole-fused heterocycles has gained considerable attention in recent years due to their wide applications in medicinal chemistry. Aminopyrazoles are versatile building blocks for the synthesis of pyrazole-fused heterocycles by multicomponent reactions. Due to the presence of multiple reaction sites, they have fascinating chemical reactivity. Thus, they have been extensively used in multicomponent reactions for the construction of pyrazole-fused heterocycles. Although few review articles on the preparation and applications of aminopyrazoles are known in the literature, to date there is no dedicated review article on the construction of pyrazole-fused heterocycles exploring the reactivity of amino pyrazoles as C,N-binucleophiles in multicomponent reactions. Considering this, herein the multicomponent reactions for the construction of pyrazole-fused heterocycles exploring C,N-binucleophilic nature of amino pyrazoles have been reported.

Multicomponent Reaction-Assisted Drug Discovery: A Time- and Cost-Effective Green Approach Speeding Up Identification and Optimization of Anticancer Drugs

Multicomponent reactions (MCRs) have emerged as a powerful strategy in synthetic organic chemistry due to their widespread applications in drug discovery and development. MCRs are flexible transformations in which three or more substrates react to form structurally complex products with high atomic efficiency. They are being increasingly appreciated as a highly exploratory and evolutionary tool by the medicinal chemistry community, opening the door to more sustainable, cost-effective and rapid synthesis of biologically active molecules. In recent years, MCR-based synthetic strategies have found extensive application in the field of drug discovery, and several anticancer drugs have been synthesized through MCRs. In this review, we present an overview of representative and recent literature examples documenting different approaches and applications of MCRs in the development of new anticancer drugs.

Nickel-Catalyzed Unsymmetrical Bis-Allylation of Alkynes

The catalytic bis-allylation of alkynes is an important but challenging protocol to construct all-carbon tetra-substituted alkenes. Particularly, the catalytic unsymmetrical bis-allylation of alkynes remains as an underexplored task to date. We herein report an unprecedented unsymmetrical bis-allylation by simultaneously utilizing electrophilic trifluoromethyl alkene and nucleophilic allylboronate as the allylic reagents. With the aid of robust Ni⁰ /NHC catalysis, valuable skipped trienes can be obtained in high regio- and stereo-selectivities under mild conditions. Mechanistic studies indicate that the reaction may proceed through a β-fluorine elimination of a nickelacycle followed by a transmetalation step with allylboronate. The present method exhibits a good tolerance of various functional groups. Besides, the skipped triene products can undergo an array of elaborate transformations, which highlights the potential applications of this strategy.

Ugi Four-Component Reactions Using Alternative Reactants

The Ugi four-component reaction (Ugi-4CR) undoubtedly is the most prominent multicomponent reaction (MCRs) that has sparked organic chemists' interest in the field. It has been widely used in the synthesis of diverse heterocycle molecules such as potential drugs, natural product analogs, pseudo peptides, macrocycles, and functional materials. The Ugi-4CRs involve the use of an amine, an aldehyde or ketone, an isocyanide, and a carboxylic acid to produce an α-acetamido carboxamide derivative, which has significantly advanced the field of isocyanide-based MCRs. The so-called intermediate nitrilium ion could be trapped by a nucleophile such as azide, N-hydroxyphthalimide, thiol, saccharin, phenol, water, and hydrogen sulfide instead of the original carboxylic acid to allow for a wide variety of Ugi-type reactions to occur.β In addition to isocyanide, there are alternative reagents for the other three components: amine, isocyanide, and aldehyde or ketone. All these alternative components render the Ugi reaction an aptly diversity-oriented synthesis of a myriad of biologically active molecules and complex scaffolds. Consequently, this review will delve deeper into alternative components used in the Ugi MCRs, particularly over the past ten years.

Synthesis of symmetric bis-α-ketoamides from renewable starting materials and comparative study of their nucleating efficiency in PLLA

An efficient and smart synthesis of bis-α-ketoamides has been disclosed. The desired products have been obtained through a Passerini multicomponent reaction using biobased aldehydes, acetic acid and bis-isocyanides (prepared from the corresponding biobased diamides), followed by a deprotection/oxidation step. The effect of the synthesized compounds on the crystallization behavior of poly(l-lactide) (PLLA) has been investigated by differential scanning calorimetry (DSC) in non-isothermal conditions. Among all the synthesized compounds, only a few are able to meaningfully enhance the nucleation of PLLA, as confirmed by a shift of the polymer crystallization peak temperature towards higher values. With the research of active polymer nucleating agents being mostly empirical, the combinatorial synthetic approach proposed herein, coupled with the possibility of a small scale mixing procedure, can potentially represent a useful strategy for the discovery of new efficient biobased polymer additives.

Brønsted acid catalyzed mechanochemical domino multicomponent reactions by employing liquid assisted grindstone chemistry

Here, we have demonstrated a metal-free energy-efficient mechanochemical approach for expedient access to a diverse set of 2-amino-3-cyano-aryl/heteroaryl-4H-chromenes, tetrahydrospiro[chromene-3,4'-indoline], 2,2'-aryl/heteroarylmethylene-bis(3-hydroxy-5,5-dimethylcyclohex-2-enone) as well as tetrahydro-1H-xanthen-1-one by employing the reactivity of 5,5-dimethylcyclohexane-1,3-dione/cyclohexane-1,3-dione with TsOH⋅H₂O as Brønsted acid catalyst under water-assisted grinding conditions at ambient temperature. The ability to accomplish multiple C-C, C=C, C-O, and C-N bonds from readily available starting materials via a domino multicomponent strategy in the absence of metal-catalyst as well as volatile organic solvents with an immediate reduction in the cost of the transformation without necessitates complex operational procedures, features the significant highlights of this approach. The excellent yield of the products, broad functional group tolerances, easy set-up, column-free, scalable synthesis with ultralow catalyst loading, short reaction time, waste-free, ligand-free, and toxic-free, are other notable advantages of this approach. The greenness and sustainability of the protocol were also established by demonstrating several green metrics parameters.

The crystal structure of 3,3′-disulfanediyldi(1H-1,2,4-triazol-5-amine) monohydrate, C4H8N8OS2

C4H8N8OS2, triclinic, P 1 ‾ $P\overline{1}$ (no. 2), a = 7.4377(5) Å, b = 7.5032(5) Å, c = 10.0964(6) Å, α = 91.481(5)°, β = 108.906(5)°, γ = 110.678(6)°, V = 492.41(6) Å3, Z = 2, Rgt (F) = 0.0653, wRref (F 2) = 0.1888, T = 293 (2) K.

Bioactive 2-pyridone-containing heterocycle syntheses using multicomponent reactions

2-Pyridone-containing heterocycles are considered privileged scaffolds in drug discovery due to their behavior as hydrogen bond donors and/or acceptors and nonpeptidic mimics, and remarkable physicochemical properties such as metabolic stability, solubility in water, and lipophilicity. This review provides a comprehensive overview of multicomponent reactions (MCRs) for the synthesis of 2-pyridone-containing heterocycles. In particular, it covers the articles published from 1999 to date related to anticancer, antibacterial, antifungal, anti-inflammatory, α-glucosidase inhibitor, and cardiotonic activities of 2-pyridone-containing heterocycles obtained exclusively by an MCR. The discussion focuses on bioactivity data, synthetic approaches, plausible reaction mechanisms, and molecular docking simulations to facilitate comparison and underscore the applications of the 2-pyridone motif in drug discovery and medicinal chemistry. We also present our conclusions and outlook for the future.

Magnetic nanoparticle-supported eosin Y salt [SB-DABCO@eosin] as an efficient heterogeneous photocatalyst for the multi-component synthesis of chromeno[4,3-b]chromene in the presence of visible light

Heterogeneous photocatalysts present a favourable procedure to realize green and eco-friendly organic reactions. We have demonstrated an SB-DABCO@eosin catalyst in a green one-pot multi-component protocol for the production of various chromeno[4,3-b]chromenes via condensation of aromatic aldehydes and dimedone under the photo-redox catalyst bearing eosin Y using visible light. The synthesized nanocatalyst was characterized using various physicochemical techniques such as FT-IR, XRD, EDX, UV-vis, SEM, TGA and DRS. The significant advantages of the present methodology include excellent yield, cost-effectiveness, easy work-up, 100% atom economy, broad substrate scope, easy separation and efficient recycling. Furthermore, the evidence showed that the investigated condensation reaction proceeds via a radical mechanism, which proved the need for reactive species such as OH˙ and ˙O₂ ^- in the photocatalytic process. In addition to the improved handling and process control, the yield of products and the rate of reactions have increased considerably in the present strategy. Reproducibility studies also guarantee good reusability and stability of the nanocatalyst for at least five runs.

Multicomponent Reactions for the Synthesis of Active Pharmaceutical Ingredients

Multicomponent reactions 9i.e., those that engage three or more starting materials to form a product that contains significant fragments of all of them), have been widely employed in the construction of compound libraries, especially in the context of diversity-oriented synthesis. While relatively less exploited, their use in target-oriented synthesis offers significant advantages in terms of synthetic efficiency. This review provides a critical summary of the use of multicomponent reactions for the preparation of active pharmaceutical principles.

Recent Applications of the Multicomponent Synthesis for Bioactive Pyrazole Derivatives

Pyrazole and its derivatives are considered a privileged N-heterocycle with immense therapeutic potential. Over the last few decades, the pot, atom, and step economy (PASE) synthesis of pyrazole derivatives by multicomponent reactions (MCRs) has gained increasing popularity in pharmaceutical and medicinal chemistry. The present review summarizes the recent developments of multicomponent reactions for the synthesis of biologically active molecules containing the pyrazole moiety. Particularly, it covers the articles published from 2015 to date related to antibacterial, anticancer, antifungal, antioxidant, α-glucosidase and α-amylase inhibitory, anti-inflammatory, antimycobacterial, antimalarial, and miscellaneous activities of pyrazole derivatives obtained exclusively via an MCR. The reported analytical and activity data, plausible synthetic mechanisms, and molecular docking simulations are organized in concise tables, schemes, and figures to facilitate comparison and underscore the key points of this review. We hope that this review will be helpful in the quest for developing more biologically active molecules and marketed drugs containing the pyrazole moiety.

Fe3O4@SiO2-PMA-Cu magnetic nanoparticles as a novel catalyst for green synthesis of β-thiol-1,4-disubstituted-1,2,3-triazoles

The magnetic nanoparticles of Fe₃O₄ were synthesized through a solid-state reaction of hydrated iron (III) chloride, hydrated iron (II) chloride and NaOH, and then purified by calcination at high temperature. In order to protect ferrite nanoparticles from oxidation and agglomeration, and to manufacture a novel catalytic system of anchored copper on the magnetic substrate, the Fe₃O₄ was core-shelled by adding tetraethyl orthosilicate. Next, the prepared Fe₃O₄@SiO₂ was supported by phosphomolybdic acid (PMA) as the second layer of nanocomposite at 80 °C in 30 h. Eventually, the new nanocomposite of Fe₃O₄@SiO₂-PMA-Cu was successfully synthesized by adding copper (II) chloride solution and solid potassium borohydride. The structure of magnetic nanocatalyst was acknowledged through different techniques such as EDS, VSM, XRD, TEM, FT-IR, XPS, TGA, BET and FESEM. The synthesis of β-thiolo/benzyl-1,2,3-triazoles from various thiiranes, terminal alkynes and sodium azide was catalyzed by Fe₃O₄@SiO₂-PMA-Cu nanocomposite in aqueous medium. In order to obtain the optimum condition, the effects of reaction time, temperature, catalyst amount and solvent were gauged. The recycled catalyst was used for several consecutive runs without any loss of activity.

Multicomponent Electrocatalytic Selective Approach to Unsymmetrical Spiro[furo[3,2-c]pyran-2,5′-pyrimidine] Scaffold under a Column Chromatography-Free Protocol at Room Temperature

Electrochemical synthesis suggested a mild, green and atom-efficient route to interesting and useful molecules, thus avoiding harsh chemical oxidizing and reducing agents used in traditional synthetic methods. Organic electrochemistry offers an excellent alternative to conventional methods of organic synthesis and creates a modern tool for carrying out organic synthesis, including cascade and multicomponent ones. In this research, a novel electrocatalytic multicomponent transformation was found: the electrochemical multicomponent assembly of arylaldehydes, N,N′-dimethylbarbituric acid and 4-hydroxy-6-methyl-2H-pyran-2-one in one pot reaction was carried out in alcohols in an undivided cell in the presence of alkali metal halides with the selective formation of substituted unsymmetrical 1′,3′,6-trimethyl-3-aryl-2′H,3H,4H-spiro[furo[3,2-c]pyran-2,5′-pyrimidine]-2′,4,4′,6′(1′H,3′H)-tetraones in 73–82% yields. This new electrocatalytic process is a selective, facile and efficient way to obtain spiro[furo[3,2-c]pyran-2,5′-pyrimidines]. According to screening molecular docking data using a self-made Python script in Flare, all synthesized compounds may be prominent for different medical applications, such as breast cancer, neurodegenerative diseases and treatments connected with urinary tract, bones and the cardiovascular system.

Multicomponent Assembly of Trisubstituted Imidazoles and Their Photochemical Cyclization into Fused Polyheterocyclic Scaffolds

A straightforward route to a large and diverse library of trisubstituted imidazoles was established via a three-component reaction of 2-oxoaldehydes, 1,3-dicarbonyl compounds, and acyclic nitrogen bis-nucleophiles. The obtained products were subsequently explored in a photochemical cyclization yielding a variety of imidazole-fused polycyclic compounds.

Miscellaneous Passerini Reaction for α-Acyloxy Carboxamide: Synthesis and Process Optimization Study

:

An accelerating effect of “Phase Transfer Catalyst” as additive was exposed for the Passerini three-component reactions and the influence on the reaction rate was studied concerning direct involvement of reactant molecules. The most flexible reaction for the rapid formation of diverse “α-acyloxycarboxamides” using passerini reaction involved multicomponent reactions using miscellaneous 2-(prop-2-ynyloxy)benzaldehyde with various aromatic acid and slightly non-polar fragment i.e. 2-isocyano-2,3,3-trimethylbutane and the representative molecule was characterized with resepct to DEPT135 NMR technique.

Metal-bio functionalized bismuthmagnetite [Fe3-x Bi x O4/SiO2@l-ArgEt3 +I-/Zn(ii)]: a novel bionanocomposite for the synthesis of 1,2,4,5-tetrahydro-2,4-dioxobenzo[b][1,4]diazepine malononitriles and malonamides at room temperature and under sonication

In this work, a new magnetized composite of bismuth (Fe3-x Bi x O4) was prepared and functionalized stepwise with silica, triethylargininium iodide ionic liquid, and Zn(ii) to prepare a multi-layered core-shell bio-nanostructure, [Fe3-x Bi x O4/SiO2@l-ArgEt3 +I-/Zn(ii)]. The modified bismuth magnetic amino acid-containing nanocomposite was characterized using several techniques including Fourier-transform infrared (FT-IR), X-ray fluorescence (XRF), vibrating sample magnetometer (VSM), field-emission scanning electron microscopy (FESEM), energy dispersive X-ray analysis (EDAX), thermogravimetric/differential scanning calorimetric (TGA/DSC) analysis, X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), and inductively coupled plasma-optical emission spectrometry (ICP-OES). The magnetized bionanocomposite exhibited high catalytic activity for the synthesis of 1,2,4,5-tetrahydro-2,4-dioxobenzo[b][1,4]diazepine malononitriles via five-component reactions between 1,2-phenylenediamines, Meldrum's acid, malononitrile, aldehydes, and isocyanides at room temperature in ethanol. The efficacy of this protocol was also examined to obtain malonamide derivatives via pseudo six-component reactions of 1,4-phenylenediamine, Meldrum's acid, malononitrile, aldehydes, and isocyanides. When the above-mentioned MCRs were repeated under the same conditions with the application of sonication, a notable decrease in the reaction time was observed. The recovery and reusability of the metal-bio functionalized bismuthmagnetite were examined successfully in 3 runs. Furthermore, the characteristics of the recovered Fe3-x Bi x O4/SiO2@l-ArgEt3 +I-/Zn(ii) were investigated though FESEM and EDAX analysis.

Synthesis and antiproliferative activities of novel piscidinol a derivatives as potential anticancer agents

Piscidinol A (1), a major compound isolated from Aphanamixis polystachya, showed modest anticancer activity against cancer cell lines. Subsequently, a series of analogues were synthesised by modification of the key structural functionalities of this high yield natural product and assessed for their anticancer potential against various cancer cell lines. Among the tested derivatives, the compounds 6e and 6i are significantly reduced the cell viability at 5.38 and 5.02 µM against DU145 prostate cancer cells, respectively. Additionally, both the compounds arrested the cell cycle at S phase and induced the late apoptosis in DU145 cells. Together, the results demonstrated that the compounds 6e and 6i could be a promising lead for the development of anticancer agents against DU145 and well worth further investigation aiming to generate potential anticancer agents.

Four-component one-pot synthesis of novel dicyanoaniline anchored triazoles

A four-component reaction was developed by taking the advantage of the reactivity of the propargyl functional groups, residing on the primarily formed dicyanoaniline products. Various enolizable cyclic ketones were reacted with malononitrile and 4-(prop-2-yn-1-yloxy)benzaldehyde derivatives in an aqueous <i>t</i>-BuOH/NaOH medium, and the resulting dicyanoanilines were subjected to a subsequent in situ click reaction to afford the final dicyanoaniline-anchored-triazole products. The enhanced photophysical properties of the novel products are under current study.

Synthesis and antifungal screening of tetramethyl hexahydro-1H-xanthene-1,8(2H)-dione derivatives as potential inhibitors of morphogenesis and biofilm formation in Candida albicans

A series of hexahydro-1H-xanthene-1,8(2H)-dione derivatives were synthesized. All the derivatives were screened for their anti-virulence properties against Candida albicans. In silico studies were performed to corroborate the experimentally observed facts.