Fine Modulation of the Catalytic Properties of Rhizomucor miehei Lipase Driven by Different Immobilization Strategies for the Selective Hydrolysis of Fish Oil

Combined cross-linking of Rhizomucor miehei lipase and Candida antarctica lipase B for the effective enrichment of omega-3 fatty acids in fish oil

The incorporation of a non-specific lipase and a sn-1,3 specific one in a single immobilized system can be a promising approach for the exploitation of both lipases. A one-step immobilization platform mediated by an isocyanide-based multi-component reaction was applied to create co-cross-linked enzymes (co-CLEs) of lipases from Rhizomucor miehei (sn-1,3 specific) and Candida antarctica (non-specific). Glutaraldehyde was found to be effective cross-linker by producing specific activity of 16.9 U/mg and immobilization yield of 99 %. High activity recovery of up to 404 % was obtained for immobilized derivatives. Leaking experiment showed covalent nature of the cross-linking processes. BSA had considerable effect on the immobilization process, providing 87-100 % immobilization yields and up to 10 times improvement in the specific activity of the immobilized derivatives. Scanning electron microscopy images showed flower-like and rod-like structures for the CLEs prepared by glutaraldehyde and undecanedicarboxylic acid, respectively. The prepared co-CLEs were examined in non-selective enrichment of eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) from fish oil, showing capability of releasing up to 100 % of both omega-3 fatty acids within 8 h of the reaction. The reusability of co-CLEs in five successive cycles presented retaining 63-72 % of their initial activities after the fifth reuse cycle in the hydrolysis reaction.

Hyperactivation of lipases by immobilization on superhydrophobic graphene quantum dots inorganic hybrid nanoflower

Various nanoflowers are synthesized for enzyme immobilization. In order to increase the activity of nanoflowers, in this study, 3D flower-like structured organic-inorganic hybrid nanoflowers (hNFs) with various lipases Rhizomucor miehei lipase (RML), Candida antarctica lipase B (CALB), Humicola insolens lipase (HIL), Thermomyces lanuginosus lipase (TLL), Eversa® Transform 2.0 (ET) a genetically modified enzyme derived of TLL and graphene quantum dots (GQDs) were prepared and characterized.Lipase hNFs [lipase-(Cu/Co)3(PO4)2] and lipase@GQDs hNFs [lipase@GQDs-(Cu/Co)3(PO4)2] were straightforwardly prepared through mixing with metal ion (Cu2+or Co2+) aqueous solutions with or without GQDs. The ET@GQDs-(Cu)3(PO4)2 hNFs demonstrated 687 % higher activity than ET-(Cu)3(PO4)2 hNFs and 650 % higher activity than the free ET. Similar results were also observed with other lipase hybrid nanoflowers. For example, TLL@GQDs-(Cu)3(PO4)2 hNFs exhibited a 557 % higher activity than TLL-(Cu)3(PO4)2 hNFs and a 463 % higher activity than free TLL. Additionally, TLL@GQDs-(Co)3(PO4)2 hNFs showed a 141 % higher activity than TLL-(Co)3(PO4)2 hNFs and a 304 % higher activity than free TLL. Upon examining pH and thermal stability, it was revealed that lipase@GQDs hNFs exhibited higher activity compared to free lipase and other hNFs without GQDs. The effect of metal ions, enzyme concentrations and amount of GQDs on the morphology and enzyme activity of the lipase-hNFs was examined.

Immobilized lipase for sustainable hydrolysis of acidified oil to produce fatty acid

Acidified oil is obtained from by-product of crops oil refining industry, which is considered as a low-cost material for fatty acid production. Hydrolysis of acidified oil by lipase catalysis for producing fatty acid is a sustainable and efficient bioprocess that is an alternative of continuous countercurrent hydrolysis. In this study, lipase from Candida rugosa (CRL) was immobilized on magnetic Fe₃O₄@SiO₂ via covalent binding strategy for highly efficient hydrolysis of acidified soybean oil. FTIR, XRD, SEM and VSM were used to characterize the immobilized lipase (Fe₃O₄@SiO₂-CRL). The enzyme properties of the Fe₃O₄@SiO₂-CRL were determined. Fe₃O₄@SiO₂-CRL was used to catalyze the hydrolysis of acidified soybean oil to produce fatty acids. Catalytic reaction conditions were studied, including amount of catalyst, reaction time, and water/oil ratio. The results of optimization indicated that the hydrolysis rate reached 98% under 10 wt.% (oil) of catalyst, 3:1 (v/v) of water/oil ratio, and 313 K after 12 h. After 5 cycles, the hydrolysis activity of Fe₃O₄@SiO₂-CRL remained 55%. Preparation of fatty acids from high-acid-value by-products through biosystem shows great industrial potential.

Laccase multi-point covalent immobilization: characterization, kinetics, and its hydrophobicity applications

Laccase from Myceliophthora thermophila was immobilized using one-point and multi-point covalent attachment on both a native and a modified new commercial epoxy carrier (Immobead 150P). After 10 cycles of operation at pH 3.0 and temperature 70 °C, the multi-point covalently immobilized laccase on the modified Immobead 150P performed best in terms of immobilization characteristics, retaining 95% of its initial activity. Thermodynamic parameters of thermal inactivation emphasized the positive impact of the immobilization procedure. At 50 °C, the immobilized and free enzyme activity levels dropped by 27 and 73%, respectively, after 48 h of incubation. The immobilized enzyme enhanced its stability in alkaline conditions, resuming 95% of its original activity after 3 h at pH 9.0. Immobilization reduced substrate affinity because the free laccase's K_m value was lower than that of the immobilized laccase. Finally, the application of immobilized laccase in an innovative wood treatment process was tested by grafting lauryl gallate (LG) in order to provide hydrophobic properties to the wood. The results showed a relative water contact angle of 85.7% for treated wood, whereas the control showed only 26.6%, after 4 min of contact between water and beechwood surface. KEY POINTS: • Multi-point covalent immobilization of a commercial laccase on a commercial support. • Enzymatic parameters generally improved by immobilization process. • New application of immobilized laccase: enzymatic-assisted wood hydrophobization.

Sortase-mediated immobilization of Candida antarctica lipase B (CalB) on graphene oxide; comparison with chemical approach

•

Sortase A was used for the oriented immobilization of CalB on graphene oxide nanosheets

•

Random attachment of CalB on GO nanosheets were performed by chemical immobilization

•

The immobilized CalB were used for the enrichment of omega-3 fatty acids in fish oil

•

The derivative obtained from oriented immobilization showed improved selectivity

In this study, Candida antarctica lipase B (CalB) was covalently immobilized on the surface of graphene oxide (GO) nanoparticles by sortase-mediated immobilization as well as a chemical attachment approach. Sortase is a transpeptidase that provides one-step purification and targeted immobilization of CalB from one specific site, presenting oriented attachment of the enzyme to a solid support. Chemical immobilization, on the other hand, is considered as a random immobilization, in which the protein can bind to the support from different regions of the protein surface. In this approach, amine-functionalized GO was further modified with glutaraldehyde to facilitate the covalent binding of CalB via its amine residues. The applied methods produced 60% and 100% immobilization yields and presented 0.106 U/mg and 0.085 U/mg of specific activities for the oriented and random immobilization, respectively. The stabilized enzyme with the sortase-mediated approach retained approximately 80% of its initial activity at 50°C.

A multi-component reaction for covalent immobilization of lipases on amine-functionalized magnetic nanoparticles: production of biodiesel from waste cooking oil

A new approach was used for the immobilization of Thermomyces lanuginosus lipase (TLL), Candida antarctica lipase B (CALB), and Rhizomucor miehei lipase (RML) on amine-functionalized magnetic nanoparticles (Fe3O4@SiO2-NH2) via a multi-component reaction route (using cyclohexyl isocyanide). The used method offered a single-step and very fast process for covalent attachment of the lipases under extremely mild reaction conditions (25 °C, water, and pH 7.0). Rapid and simple immobilization of 20 mg of RML, TLL, and CALB on 1 g of the support produced 100%, 98.5%, and 99.2% immobilization yields, respectively, after 2 h of incubation. The immobilized derivatives were then used for biodiesel production from waste cooking oil. Response surface methodology (RSM) in combination with central composite rotatable design (CCRD) was employed to evaluate and optimize the biodiesel production. The effect of some parameters such as catalyst amount, reaction temperature, methanol concentration, water content for TLL or water-adsorbent for RML and CALB, and ratio of t-butanol (wt%) were investigated on the fatty acid methyl esters (FAME) yield.

Improvement of biodiesel production from palm oil by co-immobilization of Thermomyces lanuginosa lipase and Candida antarctica lipase B: Optimization using response surface methodology

Candida antarctica lipase B (CALB) and Thermomyces lanuginose lipase (TLL) were co-immobilized on epoxy functionalized silica gel via an isocyanide-based multicomponent reaction. The immobilization process was carried out in water (pH 7) at 25 °C, rapidly (3 h) resulting in high immobilization yields (100%) with a loading of 10 mg enzyme/g support. The immobilized preparations were used to produce biodiesel by transesterification of palm oil. In an optimization study, response surface methodology (RSM) and central composite rotatable design (CCRD) methods were used to study the effect of five independent factors including temperature, methanol to oil ratio, t-butanol concentration and CALB:TLL ratio on the yield of biodiesel production. The optimum combinations for the reaction were CALB:TLL ratio (2.1:1), t-butanol (45 wt%), temperature (47 °C), methanol: oil ratio (2.3). This resulted in a FAME yield of 94%, very close to the predicted value of 98%.

Lipase From Rhizomucor miehei Immobilized on Magnetic Nanoparticles: Performance in Fatty Acid Ethyl Ester (FAEE) Optimized Production by the Taguchi Method

In this communication, it was evaluated the production of fatty acid ethyl ester (FAAE) from the free fatty acids of babassu oil catalyzed by lipase from Rhizomucor miehei (RML) immobilized on magnetic nanoparticles (MNP) coated with 3-aminopropyltriethoxysilane (APTES), Fe₃O₄@APTES-RML or RML-MNP for short. MNPs were prepared by co-precipitation coated with 3-aminopropyltriethoxysilane and used as a support to immobilize RML (immobilization yield: 94.7 ± 1.0%; biocatalyst activity: 341.3 ± 1.2 U_p–NPB/g), which were also activated with glutaraldehyde and then used to immobilize RML (immobilization yield: 91.9 ± 0.2%; biocatalyst activity: 199.6 ± 3.5 U_p–NPB/g). RML-MNP was characterized by X-Ray Powder Diffraction (XRPD), Fourier Transform-Infrared (FTIR) spectroscopy and Scanning Electron Microscope (SEM), proving the incorporation and immobilization of RML on the APTES matrix. In addition, the immobilized biocatalyst presented at 60°C a half-life 16–19 times greater than that of the soluble lipase in the pH range 5–10. RML and RML-MNP showed higher activity at pH 7; the immobilized enzyme was more active than the free enzyme in the pH range (5–10) analyzed. For the production of fatty acid ethyl ester, under optimal conditions [40°C, 6 h, 1:1 (FFAs/alcohol)] determined by the Taguchi method, it was possible to obtain conversion of 81.7 ± 0.7% using 5% of RML-MNP.

Optimization of the Production of Enzymatic Biodiesel from Residual Babassu Oil (Orbignya sp.) via RSM

Residual oil from babassu (Orbignya sp.), a low-cost raw material, was used in the enzymatic esterification for biodiesel production, using lipase B from Candida antarctica (Novozym® 435) and ethanol. For the first time in the literature, residual babassu oil and Novozym® 435 are being investigated to obtain biodiesel. In this communication, response surface methodology (RSM) and a central composite design (CCD) were used to optimize the esterification and study the effects of four factors (molar ratio (1:1–1:16, free fatty acids (FFAs) /alcohol), temperature (30–50 °C), biocatalyst content (0.05–0.15 g) and reaction time (2–6 h)) in the conversion into fatty acid ethyl esters. Under optimized conditions (1:18 molar ratio (FFAs/alcohol), 0.14 g of Novozym® 435, 48 °C and 4 h), the conversion into ethyl esters was 96.8%. It was found that after 10 consecutive cycles of esterification under optimal conditions, Novozym® 435 showed a maximum loss of activity of 5.8%, suggesting a very small change in the support/enzyme ratio proved by Fourier Transform Infrared (FTIR) spectroscopy and insignificant changes in the surface of Novozym® 435 proved by scanning electron microscopy (SEM) after the 10 consecutive cycles of esterification.