Dual-Purpose Photometric-Conductivity Detector for Simultaneous and Sequential Measurements in Flow Analysis

Response Characteristics of Contactless Impedance Detection (CID) Sensor on Slug Flow in Small Channels: The Investigation on Slug Separation Distance

In recent years, CID sensors have displayed great development potential in parameter measurement of gas-liquid two-phase flow in small channels. However, the fundamental/mechanism research on the response characteristics of CID sensors is relatively insufficient. This work focuses on the investigation of the influence of separation distance between slugs on the impedance (real part, imaginary part and amplitude) response characteristics of slug flow in small channels. Experiments were carried out with the CID sensors in four small channels with inner pipe diameters of 1.96 mm, 2.48 mm, 3.02 mm and 3.54 mm, respectively. The experimental results show that for a CID sensor, the slug separation distance has significant influence on the impedance response characteristics. There is a critical value of slug separation distance. When the slug separation distance is larger than the critical value, the impedance response characteristics of each slug can be considered independent of each other, i.e., there is no interaction between the slugs. When the slug separation distance is less than the critical value, the impedance response characteristics show obvious interaction between the slugs. It is indicated that the ratios of the critical values to the pipe inner diameters are approximate 100.

An optoelectronic flow-through detectors for active ingredients determination in the pharmaceutical formulations

An optoelectronic flow-through detector for active ingredients determination in pharmaceutical formulations is explained. Two consecutive compact photodetector's devices operating according to light-emitting diodes-solar cells concept where the LEDs acting as a light source and solar cells for measuring the attenuated light of the incident light at 180˚ have been developed. The turbidimetric detector, fabricated of ten light-emitting diodes and five solar cells only, integrated with a glass flow cell has been easily adapted in flow injection analysis manifold system. For active ingredients determination, the developed detector was successfully utilized for the development and validation of an analytical method for warfarin determination in pure and pharmaceutical preparations. The developed method is based on the forming of a white, turbid product as a result of a reaction between the warfarin and semicarbazide which was used as an oxidizing agent. The developed flow-through detector system is semi mechanized, economic in materials consumption, easy to operate and characterized by excellent analytical results. Both developed analytical devices used in two channels flow injection system allow for turbidimetric measurements of warfarin in 0.9-154 μg ml^-1 and 123-1600 μg ml^-1 ranges of concentration, with limits of detections 0.73 μg ml^-1 and 24.66 μg ml^-1 for photodetectors 1& 2 respectively. The turbidity measurement procedure for the current flow system offers to conduct 60 tests per hour of the warfarin which is the most needs of quality control analysis in industrial applications. To ensure the analytical usefulness of the flow system, the warfarin has been analyzed in the real samples with a fully acceptable agreement and a correlation between the results offered by the developed flow system and the official method.

Capacitively coupled contactless conductivity detection for analytical techniques - Developments from 2018 to 2020

The developments of analytical contactless conductivity measurements based on capacitive coupling over the two years from mid-2018 to mid-2020 are covered. This mostly concerns applications of the technique in zone electrophoresis employing conventional capillaries and to a lesser extent lab-on-chip devices. However, its use for the detection in several other flow-based analytical methods has also been reported. Detection of bubbles and measurements of flow rates in two-phase flows are also recurring themes. A few new applications in stagnant aqueous samples, e.g. endpoint detection in titrations and measurement on paper-based devices, have been reported. Some variations of the design of the measuring cells and their read-out electronics have also been described.

Modern Flow Analysis

A brief overview of articles published in this Special Issue of Molecules titled “Modern Flow Analysis” is provided. In addition to cross-sectional and methodological works, there are some reports on new technical and instrumental achievements. It has been shown that all these papers create a good picture of contemporary flow analysis, revealing the most current trends and problems in this branch of flow chemistry.