Effect of Kerogen Thermal Maturity on Methane Adsorption Capacity: A Molecular Modeling Approach

H2, CO2, and CH4 Adsorption Potential of Kerogen as a Function of Pressure, Temperature, and Maturity

We performed molecular dynamics simulation to elucidate the adsorption behavior of hydrogen (H2), carbon dioxide (CO2), and methane (CH4) on four sub-models of type II kerogens (organic matter) of varying thermal maturities over a wide range of pressures (2.75 to 20 MPa) and temperatures (323 to 423 K). The adsorption capacity was directly correlated with pressure but indirectly correlated with temperature, regardless of the kerogen or gas type. The maximum adsorption capacity was 10.6 mmol/g for the CO2, 7.5 mmol/g for CH4, and 3.7 mmol/g for the H2 in overmature kerogen at 20 MPa and 323 K. In all kerogens, adsorption followed the trend CO2 > CH4 > H2 attributed to the larger molecular size of CO2, which increased its affinity toward the kerogen. In addition, the adsorption capacity was directly associated with maturity and carbon content. This behavior can be attributed to a specific functional group, i.e., H, O, N, or S, and an increase in the effective pore volume, as both are correlated with organic matter maturity, which is directly proportional to the adsorption capacity. With the increase in carbon content from 40% to 80%, the adsorption capacity increased from 2.4 to 3.0 mmol/g for H2, 7.7 to 9.5 mmol/g for CO2, and 4.7 to 6.3 mmol/g for CH4 at 15 MPa and 323 K. With the increase in micropores, the porosity increased, and thus II-D offered the maximum adsorption capacity and the minimum II-A kerogen. For example, at a fixed pressure (20 MPa) and temperature (373 K), the CO2 adsorption capacity for type II-A kerogen was 7.3 mmol/g, while type II-D adsorbed 8.9 mmol/g at the same conditions. Kerogen porosity and the respective adsorption capacities of all gases followed the order II-D > II-C > II-B > II-A, suggesting a direct correlation between the adsorption capacity and kerogen porosity. These findings thus serve as a preliminary dataset on the gas adsorption affinity of the organic-rich shale reservoirs and have potential implications for CO2 and H2 storage in organic-rich formations.

Geomechanics of Organic Matters Contained in Shales: A Molecular-Level Investigation

Petrophysical and mechanical properties of kerogen are difficult to obtain through conventional techniques due to length scale limitations. Characterization of kerogen requires the isolation of organic materials from the rock matrix, which is associated with a high probability of mechanical damage or chemical alteration of the properties. Alternatively, computational modeling and molecular representation of kerogens can be used to simulate the outcomes of the experimental work. Volumetric and thermodynamics modeling of kerogens has provided the means for recreating nanoscale structures virtually. This research implements existing three-dimensional (3D) kerogen macromolecules to form kerogen structures that can be analyzed for the mechanical behavior of type II organic matters, mainly found in shales, at different maturity levels. Additionally, the underlying factors that could control the mechanical behavior, such as the density and porosity, were investigated. The results are compared against those reported following a similar methodology or other advanced fine-scale experimental work. The results revealed an elastomer-like mechanical behavior of kerogen with comparable elastic moduli regardless of maturity level. Moreover, the mechanical behavior of kerogen was sensitive to the type of fluid contained within the structure. Such observations can help shed more light on the macroscopic mechanical properties of shales, especially for formations with high organic contents.

Study of the Mechanical Behavior of Organic Matters Contained in Source Rocks: New Insights into the Role of Bitumen

Assessment of mechanical properties of organic matters contained in unconventional formations is needed to understand the geomechanics of source rocks. The organic matters are part of the source rock matrix, and they are made of kerogen and bitumen. Although the literature has some studies addressing the properties of kerogen and bitumen, no apparent attempts were made to address the mechanical behavior of organic matters as a combination of both. Isolation of organic matters from the rocks for experimental assessments has some risks of altering the original properties because of their delicate nature and their existence as micro- and nanoconstituents. Some computational approaches such as molecular simulation can serve as an alternative platform for the purpose of delineating organic matter properties including the mechanical ones. This work implements available 3D molecular modeling of kerogen and bitumen with different ratios to mimic organic matters that can be investigated for the mechanical properties. Upon the recreation of different configurations of organic matters molecularly, mechanical parameters such Young's, bulk, and shear constants, as well as the stress-strain relationship for the elastic and plastic deformations were extracted. The mechanical behavior was closely monitored before and after saturation with a number of gases that are commonly found in subsurface formations such as methane, carbon dioxide, and nitrogen. The results revealed that the organic matters had a mechanical behavior envelope similar to what were reported for organic-based materials such as polymers. Moreover, the structures containing bitumen exhibited larger values of Poisson's ratio, indicating less likelihood of them to degrade upon applied stresses. The presented data substantiate the importance of accounting for both bitumen and kerogen in modeling the petrophysics and the mechanical behavior of the organic matters.

Petrophysics of Kerogens Based on Realistic Structures

Combining hydraulic fracturing with lateral drilling has allowed for economical hydrocarbon production from unconventional formations. Nevertheless, beyond hydraulic fracturing, our understanding of how hydrocarbons are stored and transported from the stimulated volume of a reservoir is still limited. Source rocks consist of organic materials finely dispersed within an inorganic matrix. Despite their small size, these organic pockets are capable of storing significant amounts of hydrocarbon due to their large surface area. The extent of the source rock's storage capacity is determined by several factors, including the natural fracture abundancy, organic material content, type, and level of maturity. The petrophysical properties of organic materials, also known as kerogens, are subject to a high degree of uncertainty. Kerogens are difficult to isolate experimentally, which hinders accurate petrophysical analysis. The objective of this research was to use a molecular modeling approach to explore the petrophysical characteristics of kerogen. Kerogen macromolecules of different types and maturity levels were recreated via a computational platform. Then nanoporous structures representing these kerogens were obtained and characterized. Several elemental parameters, including porosity, density, pore size distribution, and adsorption capacity were closely delineated. The kerogen properties were found to correlate with the kerogen type and thermal maturity level. Kerogen type III showed the highest storage capacity, followed by types II and I, in a descending order. Moreover, in the same type of kerogen, a general trend of increasing storage capacity was observed as the maturity level increased. Methane adsorption capacity was modeled as a function of kerogen porosity. A transition flow regime was found to be the predominant mechanism. Such observations have significant implications for reservoir-scale modeling of unconventional resources.

Reserves Estimation for Coalbed Methane Reservoirs: A Review

A continuous growth in the global economy and population requires a sustainable energy supply. Maximizing recovery factor out of the naturally occurring hydrocarbons resources has been an active area of continuous development to meet the globally increasing demand for energy. Coalbed methane (CBM), which is one of the primary resources of natural gas, associates complex storage mechanisms and requires some advanced recovery techniques, rendering conventional reserve assessment methods insufficient. This work presents a literature review on CBM in different aspects. This includes rock characteristics such as porosity, permeability, adsorption capacity, adsorption isotherm, and coal classification. In addition, CBM reservoirs are compared to conventional reservoirs in terms of reservoir quality, reservoir properties, accumulation, and water/gas saturation and production. Different topics that contribute to the production of CBM reservoirs are also discussed. This includes production mechanisms, well spacing, well completion, and petrophysical interpretations. The main part of this work sheds a light on the available techniques to determine initial-gas-in-place in CBM reservoirs such as volumetric, decline curve, and material balance. It also presents the pros and cons of each technique. Lastly, common development and economic challenges in CBM fields are listed in addition to environmental concerns.