Copper Complexes as Alternative Redox Mediators in Dye-Sensitized Solar Cells

Enhancing Efficiency of Dye Sensitized Solar Cells by Coinage Metal Doping of Cyanidin-Silver Trimer Hybrids at TiO2 Support Based on Theoretical Study

Identification of a natural-based sensitizer with optimal stability and efficiency for dye-sensitized solar cell (DSSC) application remains a challenging task. Previously, we proposed a new class of sensitizers based on bio-nano hybrids. These systems composed of natural cyanidin dyes interacting with silver nanoclusters (NCs) have demonstrated enhanced opto-electronic and photovoltaic properties. In this study, we explore the doping of silver nanocluster within a cyanidin-Ag3 hybrid employing Density Functional Theory (DFT) and its time-dependent counterpart (TDDFT). Specifically, we investigate the influence of coinage metal atoms (Au and Cu) on the properties of the cyanidin-Ag3 system. Our findings suggest that cyanidin-Ag2Au and cyanidin-AgAuCu emerge as the most promising candidates for improved light harvesting efficiency, increased two-photon absorption, and strong coupling to the TiO2 surface. These theoretical predictions suggest the viability of replacing larger silver NCs with heterometallic trimers such as Ag2Au or AgAuCu, presenting new avenues for utilizing bio-nano hybrids at the surface for DSSC application.

Recent Investigations on the Use of Copper Complexes as Molecular Materials for Dye-Sensitized Solar Cells

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a route for harnessing the sun's energy and converting it into electricity. Since then, an impressive amount of work has been devoted to improving the global photovoltaic efficiency of DSSCs, trying to optimize all components of the device. Up to now, the best efficiencies have usually been reached with ruthenium(II) photosensitizers, even if in the last few years many classes of organic compounds have shown record efficiencies. However, the future of DSSCs is stringently connected to the research and development of cheaper materials; in particular, the replacement of rare metals with abundant ones is an important topic in view of the long-term sustainability of DSSCs intended to replace the consolidated fossil-based technology. In this context, copper is a valid candidate, being both an alternative to ruthenium in the fabrication of photosensitizers and a material able to replace the common triiodide/iodide redox couple. Thus, recently, some research papers have confirmed the great potential of copper(I) coordination complexes as a cheap and convenient alternative to ruthenium dyes. Similarly, the use of copper compounds as electron transfer mediators for DSSCs can be an excellent way to solve the problems related to the more common I3-/I- redox couple. The goal of this mini-review is to report on the latest research devoted to the use of versatile copper complexes as photosensitizers and electron shuttles in DSSCs. The coverage, from 2022 up to now, illustrates the most recent studies on dye-sensitized solar cells based on copper complexes as molecular materials.

Electronic, geometrical and photophysical facets of five coordinated porphyrin N-heterocyclic carbene transition metals complexes: A theoretical study

In the realm of dye sensitized solar cells (DSSCs), the 3d transition metals as photosensitizers are scarcely studied. In the present work, electronic structures, FMO, MEP surfaces, NBO analysis, energetics and photophysical properties of earth abundant metals (Mn, Fe and Co) based metalloporphyrins coordinated with NHC-carbene have been explored by using DFT and TDDFT calculations. According to formation energies and energy decomposition analysis (EDA), the cobalt based metalloporphyrins species are found to be more stable while in contrast manganese based species are predicted as more reactive among all. Also, from the ligation point of view, the TPP (meso-tetraphenylporphyrin) ligand forms more steady and rigid coordination as compare to the TTP (meso-tetratolylporphyrin) ligand. FMO analysis also support these observations. NBO and SNO results support the electronic configurations as well as unveil the controversial bonding pattern of NHC_carbon and metal atom and found that there is σ-bonding present between the metal and the NHC_carbon by the overlapping of sp-hybridized orbitals of carbene_carbon and sp/d hybrid orbital of the metal atom. TDDFT results show that the highest light harvesting efficiency (LHE) of all the studied species is found under the range of 360 nm - 380 nm (λ) and this may due to the presence of longer π-conjugations. In-depth investigation of this work may help to design new robust energy harvesting systems for high energy conversion efficiency based on earth abundance metals. Our results are in well agreement with the available experimental findings.

A Fascinating Trip into Iron and Copper Dyes for DSSCs

The production of electricity in a greener and more sustainable way by employing renewable sources is a great challenge in modern times. Photovoltaic systems represent an important possibility because sunlight is the most abundant renewable source. In this review article, recent studies (from 2018 to the present) involving novel iron and copper complexes employed as dyes in Dye-Sensitized Solar Cells (DSSCs) are reported; mono- and bimetallic Fe complexes, Cu-based dyes, and devices presenting both metals are discussed, together with the performances of the DSSCs reported in the papers and the corresponding values of the main parameters employed to characterize such solar cells. The feasibility of DSSCs employing copper and iron dyes, alone or in combination with other earth-abundant metals, is demonstrated. The proper optimization of the sensitizers, together with that of the electrolyte and of the semiconducting layer, will likely lead to the development of highly performing and cheap photovoltaic devices for future applications on a much larger scale.

How the Way a Naphthalimide Unit is Implemented Affects the Photophysical and -catalytic Properties of Cu(I) Photosensitizers

Driven by the great potential of solar energy conversion this study comprises the evaluation and comparison of two different design approaches for the improvement of copper based photosensitizers. In particular, the distinction between the effects of a covalently linked and a directly fused naphthalimide unit was assessed. For this purpose, the two heteroleptic Cu(I) complexes CuNIphen (NIphen = 5-(1,8-naphthalimide)-1,10-phenanthroline) and Cubiipo (biipo = 16H-benzo-[4′,5′]-isoquinolino-[2′,1′,:1,2]-imidazo-[4,5-f]-[1,10]-phenanthroline-16-one) were prepared and compared with the novel unsubstituted reference compound Cuphen (phen = 1,10-phenanthroline). Beside a comprehensive structural characterization, including two-dimensional nuclear magnetic resonance spectroscopy and X-ray analysis, a combination of electrochemistry, steady-state and time-resolved spectroscopy was used to determine the electrochemical and photophysical properties in detail. The nature of the excited states was further examined by (time-dependent) density functional theory (TD-DFT) calculations. It was found that CuNIphen exhibits a greatly enhanced absorption in the visible and a strong dependency of the excited state lifetimes on the chosen solvent. For example, the lifetime of CuNIphen extends from 0.37 µs in CH2Cl2 to 19.24 µs in MeCN, while it decreases from 128.39 to 2.6 µs in Cubiipo. Furthermore, CuNIphen has an exceptional photostability, allowing for an efficient and repetitive production of singlet oxygen with quantum yields of about 32%.

Transition Metal Coordination Compounds as Novel Materials for Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) are a novel solar cell alternative characterized by lower toxicity by using coordination transition metal compounds while providing high performance benchmarks, such as power conversion efficiency. Particular attention should be paid to compounds containing Cu, which can act both as dyes and as redox mediators, even though compounds relying on other transition metals are also frequently reported. In this paper, examples of compounds containing transition metals in combination with several ligands are presented, and their basic photovoltaic parameters are given.

Photophysics and Electrochemistry of Biomimetic Pyranoflavyliums: What Can Bioinspiration from Red Wines Offer?

Natural dyes and pigments offer incomparable diversity of structures and functionalities, making them an excellent source of inspiration for the design and development of synthetic chromophores with a myriad of emerging properties. Formed during maturation of red wines, pyranoanthocyanins are electron-deficient cationic pyranoflavylium dyes with broad absorption in the visible spectral region and pronounced chemical and photostability. Herein, we survey the optical and electrochemical properties of synthetic pyranoflavylium dyes functionalized with different electron-donating and electron-withdrawing groups, which vary their reduction potentials over a range of about 400 mV. Despite their highly electron-deficient cores, the exploration of pyranoflavyliums as photosensitizers has been limited to the "classical" n-type dye-sensitized solar cells (DSSCs) where they act as electron donors. In light of their electrochemical and spectroscopic properties, however, these biomimetic synthetic dyes should prove to be immensely beneficial as chromophores in p-type DSSCs, where their ability to act as photooxidants, along with their pronounced photostability, can benefit key advances in solar-energy science and engineering.

Solar energy conversion using first row d-block metal coordination compound sensitizers and redox mediators

The use of renewable energy is essential for the future of the Earth, and solar photons are the ultimate source of energy to satisfy the ever-increasing global energy demands. Photoconversion using dye-sensitized solar cells (DSCs) is becoming an established technology to contribute to the sustainable energy market, and among state-of-the art DSCs are those which rely on ruthenium(ii) sensitizers and the triiodide/iodide (I3 -/I-) redox mediator. Ruthenium is a critical raw material, and in this review, we focus on the use of coordination complexes of the more abundant first row d-block metals, in particular copper, iron and zinc, as dyes in DSCs. A major challenge in these DSCs is an enhancement of their photoconversion efficiencies (PCEs) which currently lag significantly behind those containing ruthenium-based dyes. The redox mediator in a DSC is responsible for regenerating the ground state of the dye. Although the I3 -/I- couple has become an established redox shuttle, it has disadvantages: its redox potential limits the values of the open-circuit voltage (V OC) in the DSC and its use creates a corrosive chemical environment within the DSC which impacts upon the long-term stability of the cells. First row d-block metal coordination compounds, especially those containing cobalt, and copper, have come to the fore in the development of alternative redox mediators and we detail the progress in this field over the last decade, with particular attention to Cu2+/Cu+ redox mediators which, when coupled with appropriate dyes, have achieved V OC values in excess of 1000 mV. We also draw attention to aspects of the recyclability of DSCs.

Sterically demanding pyridine-quinoline anchoring ligands as building blocks for copper(I)-based dye-sensitized solar cells (DSSCs) complexes

The Pfitzinger condensation reaction was employed to synthesise N^N sterically demanding ligands bearing carboxylic acid anchoring groups, namely 2,2΄-pyridyl-quinoline-4-carboxylic acid (pqca); 6'-methyl-2,2΄-pyridyl-quinoline-4-carboxylic acid (6'-Mepqca); 8-methyl-2,2΄-pyridyl-quinoline-4-carboxylic acid (8-Mepqca) and 8,6'-dimethyl-2,2΄-pyridyl-quinoline-4-carboxylic acid...

Recent Investigations on Thiocyanate-Free Ruthenium(II) 2,2'-Bipyridyl Complexes for Dye-Sensitized Solar Cells

Three decades ago, dye-sensitized solar cells (DSSCs) emerged as a method for harnessing the energy of the sun and for converting it into electricity. Since then, a lot of work has been devoted to create better global photovoltaic efficiencies and long term stability. Among photosensitizers for DSSCs, thiocyanate-free ruthenium(II) complexes have gained increasing interest due to their better stability compared to conventional thiocyanate-based complexes, such as benchmark dyes N719 and Z907. In this mini-review, two classes of thiocyanate-free Ru(II) complexes are presented: (a) bis-bipyridyl compounds bearing an ancillary cyclometalating bidentate ligand; (b) bipyridyl compounds bearing non-cyclometalating ancillary ligands. The coverage, mainly from 2014 up to now, is not exhaustive, but illustrates the most recent design strategies and photovoltaic properties of these two families of ruthenium(II) dyes.

Synthesis and Physico-Chemical Properties of Homoleptic Copper(I) Complexes with Asymmetric Ligands as a DSSC Dye

To develop low-cost and efficient dye-sensitized solar cells (DSSCs), we designed and prepared three homoleptic Cu(I) complexes with asymmetric ligands, M1, M2, and Y3, which have the advantages of heteroleptic-type complexes and compensate for their synthetic challenges. The three copper(I) complexes were characterized by elemental analysis, UV-vis absorption spectroscopy, and electrochemical measurements. Their absorption spectra and orbital energies were evaluated and are discussed in the context of TD-DFT calculations. The complexes have high V_OC values (0.48, 0.60, and 0.66 V for M1, M2, and Y3, respectively) which are similar to previously reported copper(I) dyes with symmetric ligands, although their energy conversion efficiencies are relatively low (0.17, 0.64, and 2.66%, respectively).

Rational Design of Broadly Absorbing Boron Dipyrromethene-Carbazole Dyads for Dye-Sensitized Solar Cells: A DFT Study

Structure engineering of boron dipyrromethene (BODIPY) organic dye, to increase its light-harvesting efficiency in dye-sensitized solar cells, has been the subject of rigorous research recently. Herein, we report on the rational designing of BODIPY-carbazole (D-π-A-A) dyads using density functional theory (DFT). The structure of BODIPY-carbazole was first modified by substituting an electron-donating -N(CH3)2 group at the electron-rich carbazole moiety, and two electron-accepting -COOH groups at the BODIPY core. The DFT calculations showed a significant lowering of the band gap from 2.9 eV (pristine BODIPY-carbazole dyad) to 1.87 eV (modified BODIPY-carbazole dyad). Further modification was demonstrated by the incorporation of heterocyclic rings such as thiophene (denoted as D1T), furan (D1F), and phosphole (D1P) into BODIPY-carbazole moiety, which red-shifted the light absorption spectra and consequently improved the light-harvesting efficiency of the dyes. The interactions at the dye/semiconductor interface were studied by employing their bridged-bidentate adsorption models over the titanium dioxide (TiO2)38 nanocluster. Results suggested that the electrons can be efficiently injected from the lowest unoccupied molecular orbital (LUMO) of dyes into the conduction band of TiO2. Among the three dyads, D1P exhibited superior photovoltaic performance with a maximum power conversion efficiency of 13.50%, a short-circuit current density (J sc) of 27.2 mA·cm-2, and an open-circuit voltage (V oc) of 731 mV. The structurally configured new D1P dye can be used as a potential alternative photosensitizer for high-performance dye-sensitized solar cells.

Synthesis, Spectroscopic, and Theoretical Study of Copper and Cobalt Complexes with Dacarbazine

Dacarbazine (DAC) 5-(3,3-dimethyl-1-triazenyl)imidazole-4-carboxamide is an imidazole-carboxamide derivative that is structurally related to purines. DAC belongs to the triazene compounds, which are a group of alkylating agents with antitumor and mutagenic properties. DAC is a non-cell cycle specific drug, active in all phases of the cellular cycle. In the frame of this work the 3d metal complexes (cobalt and copper) with dacarbazine were synthesized. Their spectroscopic properties by the use of FT-IR, FT-Raman, and ¹HNMR were studied. The structures of dacarbazine and its complexes with copper(II) and cobalt(II) were calculated using DFT methods. The effect of metals on the electronic charge distribution of dacarbazine was discussed on the basis of calculated NBO atomic charges. The reactivity of metal complexes in relation to ligand alone was estimated on the basis of calculated energy of HOMO and LUMO orbitals. The aromaticity of the imidazole ring in dacarbazine and the complexes were compared (on the basis of calculated geometric indices of aromaticity). Thermal stability of the investigated 3d-metal complexes with dacarbazine and the products of their thermal decomposition were analyzed.

Methoxy-substituted copper complexes as possible redox mediators in dye-sensitized solar cells

Methoxy-substituted aromatic diimines and corresponding homoleptic copper(i) and copper(ii) complexes as possible redox mediators in dye-sensitized solar cells.