Plasma Synthesis of Advanced Metal Oxide Nanoparticles and Their Applications as Transparent Conducting Oxide Thin Films

Characterization of NiCuOxNy Coatings Obtained via RF Sputtering: Structure, Morphology, and Optical Properties

The rapid advancement of technology necessitates the continual development of versatile materials that can adapt to new electronic devices. Rare earth elements, which are scarce in nature, possess the set of properties required for use as semiconductors. Consequently, this research aims to achieve similar properties using materials that are abundant in nature and have a low commercial cost. To this end, nickel and copper were utilized to synthesize thin films of nickel-copper binary oxynitride via reactive RF sputtering. The influence of nitrogen flow on the structure, morphology, chemical composition, and optical properties of the films was investigated using various characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS), as well as transmittance and absorbance measurements. The crystalline structure of the films shows that they can have preferential growth or be polycrystalline according to the nitrogen flow used during deposition and that both the oxides and oxynitrides of metals are formed. We identified unknown phases specific to this material, termed "NiCuOxNy". The morphology revealed that the grain size of the coatings was dependent on the nitrogen flow rate, with grain size decreasing as the nitrogen flow rate increased. Notably, the coatings demonstrated transparency for wavelengths exceeding 1000 nm, with an optical band gap ranging from 1.21 to 1.86 eV.

Plasmon resonances of GZO core-Ag shell nanospheres, nanorods, and nanodisks for biosensing and biomedical applications in near-infrared biological windows I and II

There is currently a great deal of interest in realizing localized surface plasmon resonances (LSPRs) in two distinct windows in the near-infrared (NIR) spectrum for in vivo biosensing and medical applications, the biological window (BW) I and II (BW I, 700-900 nm; BW II, 1000-1700 nm). This study aims to demonstrate that LSPRs of Ga-doped ZnO (GZO) core-silver (Ag) shell structures exhibit promising features for biological applications in the NIR BW I and II. Here, we study three different shapes for nanoshells: the core-shell nanosphere, nanorod, and nanodisk. In the calculation of the optical response of these nanoshells, an effective medium approach is first used to reduce the dielectric function of a nanoshell to that of an equivalent homogenous NP with an effective dielectric function. Then, the LSPR spectra of nanoshells are calculated using the modified long-wavelength approximation (MLWA), which corrects the polarizability of the equivalent NP as obtained by Gans theory. Through numerical investigations, we examine the impacts of the core and shell sizes of the proposed nanoshells as well as the medium refractive index on the position and line width of the plasmon resonance peaks. It is shown that the plasmon resonances of the three proposed nanoshells exhibit astonishing resonance tunability in the NIR region by varying their geometrical parameters. Specifically, the improved spectrum characteristics and tunability of its plasmon resonances make the GZO-Ag nanosphere a more viable platform for NIR applications than the spherical metal colloid. Furthermore, we demonstrate that the sensitivity and figure of merit (FOM) of the plasmon resonances may be significantly increased by using GZO-Ag nanorods and nanodisks in place of GZO-Ag nanospheres. It is found that the optical properties of the transverse plasmon resonance of the GZO-Ag nanodisk are superior to all plasmon resonances produced by the GZO-Ag nanorods and GZO-Ag nanospheres in terms of sensitivity and FOM. The FOM of the transverse plasmon mode of the GZO-Ag nanodisk is almost two orders of magnitude higher than that of the longitudinal and transverse plasmon modes of the GZO-Ag nanorod in BW I and BW II. And it is 1.5 and 2 times higher than the plasmon resonance FOM of GZO-Ag nanospheres in BW I and BW II, respectively.

Agriculture and environmental management through nanotechnology: Eco-friendly nanomaterial synthesis for soil-plant systems, food safety, and sustainability

Through the advancement of nanotechnology, agricultural and food systems are undergoing strategic enhancements, offering innovative solutions to complex problems. This scholarly essay thoroughly examines nanotechnological innovations and their implications within these critical industries. Traditional practices are undergoing radical transformation as nanomaterials emerge as novel agents in roles traditionally filled by fertilizers, pesticides, and biosensors. Micronutrient management and preservation techniques are further enhanced, indicating a shift towards more nutrient-dense and longevity-oriented food production. Nanoparticles (NPs), with their unique physicochemical properties, such as an extraordinary surface-to-volume ratio, find applications in healthcare, diagnostics, agriculture, and other fields. However, concerns about their potential overuse and bioaccumulation raise unanswered questions about their health effects. Molecule-to-molecule interactions and physicochemical dynamics create pathways through which nanoparticles cause toxicity. The combination of nanotechnology and environmental sustainability principles leads to the examination of green nanoparticle synthesis. The discourse extends to how nanomaterials penetrate biological systems, their applications, toxicological effects, and dissemination routes. Additionally, this examination delves into the ecological consequences of nanomaterial contamination in natural ecosystems. Employing robust risk assessment methodologies, including the risk allocation framework, is recommended to address potential dangers associated with nanotechnology integration. Establishing standardized, universally accepted guidelines for evaluating nanomaterial toxicity and protocols for nano-waste disposal is urged to ensure responsible stewardship of this transformative technology. In conclusion, the article summarizes global trends, persistent challenges, and emerging regulatory strategies shaping nanotechnology in agriculture and food science. Sustained, in-depth research is crucial to fully benefit from nanotechnology prospects for sustainable agriculture and food systems.

Modeling of Advanced Silicon Nanomaterial Synthesis Approach: From Reactive Thermal Plasma Jet to Nanosized Particles

A three-dimensional numerical modelling of a time-dependent, turbulent thermal plasma jet was developed to synthetize silicon nanopowder. Computational fluid dynamics and particle models were employed via COMSOL Multiphysics® v. 5.4 (COMSOL AB, Stockholm, Sweden) to simulate fluid and particle motion in the plasma jet, as well as the heat dependency. Plasma flow and particle interactions were exemplified in terms of momentum, energy, and turbulence flow. The transport of nanoparticles through convection, diffusion, and thermophoresis were also considered. The trajectories and heat transfer of both plasma jet fields, and particles are represented. The swirling flow controls the plasma jet and highly affects the dispersion of the nanoparticles. We demonstrate a decrease in both particles’ velocity and temperature distribution at a higher carrier gas injection velocity. The increase in the particle size and number affects the momentum transfer, turbulence modulation, and energy of particles, and also reduces plasma jet parameters. On the other hand, the upstream flame significantly impacts the particle’s behavior under velocity and heat transfer variation. Our findings open the door for examining thermal plasma impact in nanoparticle synthesis, where it plays a major role in optimizing the growth parameters, ensuring high quality with a low-cost technique.

Controllable Preparation of Spherical Molybdenum Nano-Powders by One-Step Reduction of APM in Radio Frequency Hydrogen Plasma

Spherical molybdenum nano-powders were in-situ ultrafast synthesized from ammonium paramolybdate (APM) raw materials in a one-step reduction method by radio frequency (RF) hydrogen plasma. Due to the extreme conditions of the RF plasma torch such as its high temperature and large temperature gradient, the injected raw APM powder was quickly gasified and then reduced into nano-sized metal molybdenum (Mo) powder. The influences of APM powder delivery rate and H₂ concentration on the properties of the obtained powders were investigated. Field-emission scanning electron microscope (FESEM), transmission electron microscope (TEM), X-ray diffraction (XRD), nanolaser particle analyzer, and specific surface area method were used to characterize the morphology, phase, and particle size distribution of the powders. The results showed that the nano-sized Mo powder obtained by hydrogen plasma treatment had a quasi-spherical morphology and an average particle size of about 30 nm. The particle size could be successfully adjusted by varying H₂ concentrations. In addition, spherical nano-sized MoO₃ powder could be obtained when no H₂ was added into the RF plasma.

Recent Advances in the Plasma-Assisted Synthesis of Zinc Oxide Nanoparticles

An overview of recent work on the low-temperature plasma-assisted synthesis of zinc oxide (ZnO) nanoparticles is presented and interpreted in terms of gas-phase and surface reactions with illustrated examples. The thermodynamical nonequilibrium conditions allow the formation of chemically reactive species with a potential energy of several eV, which readily interact with the Zn precursors and initiate reactions leading to the formation of nanoparticles or nanowires. The high-quality nanowires were synthesized from Zn powders only upon interaction with moderately ionized plasma in a narrow range of plasma parameters. This technique is promising for the synthesis of large quantities of nanowires with aspect ratios well above 10, but the exact range of parameters remains to be determined. Apart from the ex situ techniques, the ZnO nanoparticles can be synthesized by depositing a film of precursors (often Zn salts or Zn-containing organometallic compounds) and exposing them to oxygen plasma. This technique is useful for the synthesis of well-adherent ZnO nanoparticles on heat-sensitive objects but requires further scientific validation as it often leads to the formation of a semicontinuous ZnO film rather than nanoparticles. Both low-pressure and atmospheric plasmas are useful in converting the precursor film into ZnO nanoparticles despite completely different mechanisms.