Mono- and Mixed Metal Complexes of Eu3+, Gd3+, and Tb3+ with a Diketone, Bearing Pyrazole Moiety and CHF2-Group: Structure, Color Tuning, and Kinetics of Energy Transfer between Lanthanide Ions

Rough and Porous Micropebbles of CeCu2Si2 for Energy Storage Applications

Supercapacitors have attracted considerable attention due to their advantages, including being lightweight and having rapid charge-discharge, a good rate capability, and high cyclic stability. Electrodes are one of the most important factors influencing the performance of supercapacitors. Herein, a three-dimensional network of rough and porous micropebbles of CeCu2Si2 has been prepared using a one-step procedure and tested for the first time as a supercapacitor electrode. The synthesized material was extensively characterized in a three-electrode configuration using different electrochemical techniques, such as cyclic voltammetry (CV), galvanostatic charge and discharge (GCD) tests, and electrochemical impedance spectroscopy (EIS). CeCu2Si2 shows rather high mass-capacitance values: 278 F/g at 1 A/g and 295 F/g at 10 mV/s. Moreover, the material exhibits remarkable long-term stability: 98% of the initial capacitance was retained after 20,000 cycles at 10 A/g and the Coulombic efficiency remains equal to 100% at the end of the cycles.

Luminescent Properties and Charge Compensator Effects of SrMo0.5W0.5O4:Eu3+ for White Light LEDs

The high-temperature solid-phase approach was used to synthesize Eu3+-doped SrMo0.5W0.5O4 phosphors, whose morphological structure and luminescence properties were then characterized by XRD, SEM, FT-IR, excitation spectra, emission spectra, and fluorescence decay curves. The results reveal that the best phosphor synthesis temperature was 900 °C and that the doping of Eu3+ and charge compensators (K+, Li+, Na+, NH4+) had no effect on the crystal phase change. SrMo0.5W0.5O4:Eu3+ has major excitation peaks at 273 nm, 397 nm, and 464 nm, and a main emission peak at 615 nm, making it a potential red fluorescent material to be used as a down converter in UV LEDs (273 nm and 397 nm) and blue light LEDs (464 nm) to achieve Red emission. The emission spectra of Sr1−yMo0.5W0.5O4:yEu3+(y = 0.005, 0.01, 0.02, 0.05, 0.07) excited at 273 were depicted, with the Eu3+ concentration increasing the luminescence intensity first increases and then decreases, the emission peak intensity of SrMo0.5W0.5O4:Eu3+ achieves its maximum when the doping concentration of Eu3+ is 1%, and the critical transfer distance is calculated as 25.57 Å. When various charge compensators such as K+, Li+, Na+, and NH4+ are added to SrMo0.5W0.5O4:Eu3+, the NH4+ shows the best effect with the optimal doping concentration of 3wt%. The SrMo0.5W0.5O4:Eu3+,NH4+ color coordinate is (0.656,0.343), which is close to that of the ideal red light (0.670,0.333).

Self-Assembly of a Two-Dimensional Coordination Polymer Based on Silver and Lanthanide Tetrakis-Acylpyrazolonates: An Efficient New Strategy for Suppressing Ligand-to-Metal Charge Transfer Quenching of Europium Luminescence

A new strategy for the easy polymerization of anionic [Ln(Q^cy)₄]^- (HQ^cy-4-(cyclohexanecarbonyl)-5-methyl-2-phenyl-2,4-dihydro-3H-pyrazol-3-one) into two-dimensional layers of [AgLn(Q^cy)₄]_n (Ln = Sm, Eu, Gd, Tb and Dy) is proposed by binding the single molecular anions [Ln(Q^cy)₄]^- to silver cations through the coordination of the pyridinic nitrogen atoms of the pyrazolonate rings. The luminescent properties of [AgLn(Q^cy)₄]_n have been studied in detail, and it was shown that the previously described low photoluminescence quantum yield (PLQY) of [Eu(Q^cy)₄]^- is due to Ligand-To-Metal Charge Transfer (LMCT) quenching, which is effectively suppressed in the heterometallic [AgEu(Q^cy)₄]_n polymer. Sensibilization coefficients for H₃O[Eu(Q^cy)₄], [AgEu(Q^cy)₄]_n, and H₃O[Sm(Q^cy)₄] complexes (n ≈ 1) were estimated via theoretical analysis (also by using Judd-Ofelt theory for Sm³⁺) and PLQY measurements.

(Diaqua)hexakis(4,4,4-trifluoro-1-(1-methyl-1H-pyrazol-4-yl)butane-1,3-dionato-κ2O,O’)(μ-(1,4-dioxane))digadolinium (III), Solvate with Two Molecules of 1,4-Dioxane

A binuclear gadolinium (III) complex was obtained through the interaction of GdCl3·6H2O, 4,4,4-trifluoro-1-(1-methyl-1H-pyrazol-4-yl)butane-1,3-dione and NaOH in MeOH solution. Molar ration of reagents equal to 1:3:3 was used. Upon recrystallization of wet 1,4-dioxane, an intermediate hydrated complex formed stable crystalline solvate with the composition [(Gd2(L)3(H2O))2(C4H8O2)]•2(C4H8O2). The structured of complex was established by single crystal XRD experiment. Furthermore, some photophysical properties of the complex were measured. Thus, the energy of the first exited triplet state for the diketonate ligand was found to be 22400 cm−1, which makes 4,4,4-trifluoro-1-(1-methyl-1H-pyrazol-4-yl)butane-1,3-dione a promising ligand for the preparation of highly luminescent Eu3+ and Sm3+ complexes.

New Carboxylate Anionic Sm-MOF: Synthesis, Structure and Effect of the Isomorphic Substitution of Sm3+ with Gd3+ and Tb3+ Ions on the Luminescent Properties

Two new compounds, namely {(NMe2H2)}[Ln(TDA)(HCOO)] 0.5H2O, Ln = Sm3+ (Sm-TDA) and Gd3+ (Gd-TDA), where TDA3− is the anion of 1H-1,2,3-triazole-4,5-dicarboxylic acid (H3TDA), were synthesized by the solvothermal method in a DMF:H2O mixture. According to single-crystal X-ray diffraction data, the compounds are 3d-MOFs with an anionic lattice and dimethylammonium cations occupying part of the cavities. Based on these compounds, two series of mixed-metal complexes, [NMe2H2][SmxLn1-x(TDA)(HCOO)], (x = 0.9 (Sm0.9Ln0.1-TDA), x = 0.8 (Sm0.8-Ln0.2-TDA)…Sm0.02Ln0.98-TDA, Ln = Tb, Gd), were also obtained and characterized by powder XRD. The luminescent properties of the compounds were studied and it was shown that the resulting compounds are two- or three-component emitters with the possibility of fine color tuning by changing the intensities of fluorescence and phosphorescence of the ligand, as well as the luminescence of Sm3+ and Tb3+ f-ions.

Highlighting Recent Crystalline Engineering Aspects of Luminescent Coordination Polymers Based on F-Elements and Ditopic Aliphatic Ligands

Three principal factors may influence the final structure of coordination polymers (CPs): (i) the nature of the ligand, (ii) the type and coordination number of the metal center, and (iii) the reaction conditions. Further, flexible carboxylate aliphatic ligands have been widely employed as building blocks for designing and synthesizing CPs, resulting in a diverse array of materials with exciting architectures, porosities, dimensionalities, and topologies as well as an increasing number of properties and applications. These ligands show different structural features, such as torsion angles, carbon backbone number, and coordination modes, which affect the desired products and so enable the generation of polymorphs or crystalline phases. Additionally, due to their large coordination numbers, using 4f and 5f metals as coordination centers combined with aliphatic ligands increases the possibility of obtaining different crystal phases. Additionally, by varying the synthetic conditions, we may control the production of a specific solid phase by understanding the thermodynamic and kinetic factors that influence the self-assembly process. This revision highlights the relationship between the structural variety of CPs based on flexible carboxylate aliphatic ligands and f-elements (lanthanide and actinides) and their outstanding luminescent properties such as solid-state emissions, sensing, and photocatalysis. In this sense, we present a structural analysis of the CPs reported with the oxalate ligand, as the one rigid ligand of the family, and other flexible dicarboxylate linkers with –CH₂– spacers. Additionally, the nature of the luminescence properties of the 4f or 5f-CPs is analyzed, and finally, we present a novel set of CPs using a glutarate-derived ligand and samarium, with the formula [2,2′-bipyH][Sm(HFG)₂ (2,2′-bipy) (H₂O)₂]•(2,2′-bipy) (α-Sm) and [2,2′-bipyH][Sm(HFG)₂ (2,2′-bipy) (H₂O)₂] (β-Sm).

Crystal Structures, Thermal and Luminescent Properties of Gadolinium(III) Trans-1,4-cyclohexanedicarboxylate Metal-Organic Frameworks

Four new gadolinium(III) metal-organic frameworks containing 2,2′-bipyridyl (bpy) or 1,10-phenanthroline (phen) chelate ligands and trans-1,4-cyclohexanedicarboxylate (chdc2−) were synthesized. Their crystal structures were determined by single-crystal X-ray diffraction analysis. All four coordination frameworks are based on the binuclear carboxylate building units. In the compounds [Gd2(bpy)2(chdc)3]·H2O (1) and [Gd2(phen)2(chdc)3]·0.5DMF (2), the six-connected {Ln2(L)2(OOCR)6} blocks form a 3D network with the primitive cubic (pcu) topology. In the compounds [Gd2(NO3)2(phen)2(chdc)2]·2DMF (3) and [Gd2Cl2(phen)2(chdc)2]·0.3DMF·2.2dioxane (4), the four-connected {Ln2(L)2(X)2OOCR)4} units (where X = NO3− for 3 or Cl− for 4) form a 2D square-grid (sql) network. The solid-state luminescent properties were investigated for the synthesized frameworks. Bpy-containing compound 1 shows no luminescence, possibly due to the paramagnetic quenching by Gd3+ cation. In contrast, the phenathroline-containing MOFs 2–4 possess yellow emission under visible excitation (λex = 460 nm) with the tuning of the characteristic wavelength by the coordination environment of the metal center.

Cinnamal Sensing and Luminescence Color Tuning in a Series of Rare-Earth Metal-Organic Frameworks with Trans-1,4-cyclohexanedicarboxylate

Three isostructural metal-organic frameworks ([Ln2(phen)2(NO3)2(chdc)2]·2DMF (Ln3+ = Y3+ for 1, Eu3+ for 2 or Tb3+ for 3; phen = 1,10-phenanthroline; H2chdc = trans-1,4-cyclohexanedicarboxylic acid) were synthesized and characterized. The compounds are based on a binuclear block {M2(phen)2(NO3)2(OOCR)4} assembled into a two-dime nsional square-grid network containing tetragonal channels with 26% total solvent-accessible volume. Yttrium (1)-, europium (2)- and terbium (3)-based structures emit in the blue, red and green regions, respectively, representing the basic colors of the standard RGB matrix. A doping of Eu3+ and/or Tb3+ centers into the Y3+-based phase led to mixed-metal compositions with tunable emission color and high quantum yields (QY) up to 84%. The bright luminescence of a suspension of microcrystalline 3 in DMF (QY = 78%) is effectively quenched by diluted cinnamaldehyde (cinnamal) solutions at millimolar concentrations, suggesting a convenient and analytically viable sensing method for this important chemical.