Characterizing the Volatile and Sensory Profiles, and Sugar Content of Beeswax, Beebread, Bee Pollen, and Honey

Headspace volatiles profiles of different spring varieties and a wild relative of wheat flour

Volatile profiling was conducted on four wheat varieties Triticum aestivum cv. Chinese Spring (CS), Highbury (High), Paragon (Para), Pavon76 (Pav76), and one wild relative Triticum timopheevii (P95). Headspace solid-phase microextraction (SPME) combined with gas chromatography-mass spectrometry (GC-MS) was used to explore differences in flavor formation mechanisms in different flours before and after starch gelatinization. Solvent retention capacity (SRC) analysis revealed subtle differences in water absorption, gluten strength, and starch characteristics across wheat flour types. Rapid Visco Analysis (RVA) of whole wheat flour demonstrated significant variations in pasting properties among wheat varieties, with P95 exhibiting higher viscosities compared to CS and High potentially influenced by starch gelatinization, protein-starch interactions, and lipid content. Aroma contributions of P95 clustered positively in PCA plots, contrasting with the four main varieties, indicative of species-level differentiation. Furthermore, the study highlighted the roles of viscosity, protein structure, lipid content, and fatty acid composition in modulating the release and perception of volatile aroma compounds during heating. This study sheds light on how the distinct characteristics of wheat flour influence aroma profiles, revealing species-level differences and the pivotal role of physiochemical properties in shaping flavor development mechanisms.

Volatile profile of bee bread

Bee bread is one of the least studied bee products. In this study, ten bee bread samples were characterized using palynology and HS-SPME-GC-MS (headspace solid-phase microextraction gas chromatography-mass spectrometry). In total, over one hundred different volatile components were identified, belonging to different chemical groups. Only ten common components were detected in all the samples. These volatiles were ethanol, ethylene chloride, ethyl acetate, acetic acid, α-pinene, furfural, nonane, nonanal, n-hexane and isovaleric acid. Several other components were commonly shared among various bee bread samples. Over sixty detected compounds have not been previously reported in bee bread. The analysis required a mild extraction temperature of 40 °C, as higher temperatures resulted in the Maillard reaction, leading to the production of furfural. The profile of volatile compounds of the tested bee pollen samples was complex and varied. Some relationships have been shown between botanical origin and volatile organic compound profile.

The genome of the blind bee louse fly reveals deep convergences with its social host and illuminates Drosophila origins

Social insects' nests harbor intruders known as inquilines,1 which are usually related to their hosts.2,3 However, distant non-social inquilines may also show convergences with their hosts,4,5 although the underlying genomic changes remain unclear. We analyzed the genome of the wingless and blind bee louse fly Braula coeca, an inquiline kleptoparasite of the western honey bee, Apis mellifera.6,7 Using large phylogenomic data, we confirmed recent accounts that the bee louse fly is a drosophilid8,9 and showed that it had likely evolved from a sap-breeder ancestor associated with honeydew and scale insects' wax. Unlike many parasites, the bee louse fly genome did not show significant erosion or strict reliance on an endosymbiont, likely due to a relatively recent age of inquilinism. However, we observed a horizontal transfer of a transposon and a striking parallel evolution in a set of gene families between the honey bee and the bee louse fly. Convergences included genes potentially involved in metabolism and immunity and the loss of nearly all bitter-tasting gustatory receptors, in agreement with life in a protective nest and a diet of honey, pollen, and beeswax. Vision and odorant receptor genes also exhibited rapid losses. Only genes whose orthologs in the closely related Drosophila melanogaster respond to honey bee pheromone components or floral aroma were retained, whereas the losses included orthologous receptors responsive to the anti-ovarian honey bee queen pheromones. Hence, deep genomic convergences can underlie major phenotypic transitions during the evolution of inquilinism between non-social parasites and their social hosts.

The Identification of Bee Comb Cell Contents Using Semiconductor Gas Sensors

Beekeeping is an extremely difficult field of agriculture. It requires efficient management of the bee nest so that the bee colony can develop efficiently and produce as much honey and other bee products as possible. The beekeeper, therefore, must constantly monitor the contents of the bee comb. At the University of Warmia and Mazury in Olsztyn, research is being carried out to develop methods for efficient management of the apiary. One of our research goals was to test whether a gas detector (MCA-8) based on six semiconductor sensors-TGS823, TGS826, TGS832, TGS2600, TGS2602, and TGS2603 from the company FIGARO-is able to recognize the contents of bee comb cells. For this purpose, polystyrene and wooden test chambers were created, in which fragments of bee comb with different contents were placed. Gas samples were analyzed from an empty comb, a comb with sealed brood, a comb with open brood, a comb with carbohydrate food in the form of sugar syrup, and a comb with bee bread. In addition, a sample of gas from an empty chamber was tested. The results in two variants were analyzed: (1) Variant 1, the value of 270 s of sensor readings from the sample measurement (exposure phase), and (2) Variant 2, the value of 270 s of sensor readings from the sample measurement (measurement phase) with baseline correction by subtracting the last 600 s of surrounding air measurements (flushing phase). A five-time cross-validation 2 (5xCV2) test and the Monte Carlo cross-validation 25 (trained and tested 25 times) were performed. Fourteen classifiers were tested. The naive Bayes classifier (NB) proved to be the most effective method for distinguishing individual classes from others. The MCA-8 device brilliantly differentiates an empty comb from a comb with contents. It differentiates better between an empty comb and a comb with brood, with results of more than 83%. Lower class accuracy was obtained when distinguishing an empty comb from a comb with food and a comb with bee bread, with results of less than 73%. The matrix of six TGS sensors in the device shows promising versatility in distinguishing between various types of brood and food found in bee comb cells. This capability, though still developing, positions the MCA-8 device as a potentially invaluable tool for enhancing the efficiency and effectiveness of beekeepers in the future.

Differentiating between Monofloral Portuguese Bee Pollens Using Phenolic and Volatile Profiles and Their Impact on Bioactive Properties

Nowadays, bee products are commended by consumers for their medicinal and dietary properties. This study aimed to differentiate between monofloral bee pollens originating from Portugal using phenolic and volatile profiles and investigate their antioxidant and cytotoxic activity. Total phenolic and flavonoid compounds were recorded between 2.9-35.8 mg GAE/g and 0.7-4.8 mg QE/g, respectively. The LC/DAD/ESI-MSn analytical results allowed us to identify and quantify a total of 72 compounds, including phenolic and phenylamide compounds, whereas GC-MS results revealed the presence of 49 different compounds, mostly ketones, aldehydes, esters, hydrocarbons, and terpenes. The highest DPPH• radical scavenging activity, EC50: 0.07 mg/mL, was recorded in the sample dominated by Castanae sp. pollen, whereas the Rubus sp. (1.59 mM Trolox/mg) and Cistaceae sp. (0.09 mg GAE/g) pollen species exhibited the highest antioxidant activity in ABTS•+ and reducing power assays, respectively. Regarding the anti-carcinogenic activity, only Carduus sp. showed remarkable cytotoxic potential against MCF-7.

Analysis of Oleogel Volatile Profile Formation under Ultrasonic Treatment

Under certain conditions, ultrasonic treatment of certain foods and ingredients can contribute to the appearance of an extraneous odor, which is not usual for them, especially in fat-containing products. Since the food sector uses high-intensity ultrasound to control the crystallization of fats, the development of foreign smells and secondary fat oxidation products may impact the quality and safety of such items. In this work, we studied the volatile compounds' profiles of oleogels structured with individual fractions of beeswax using ultrasonic treatment. For this work, six samples of oleogels were obtained. Sunflower oil was used as a fatty base, and three fractions of beeswax were used as gelators: hydrocarbon fraction (>99%), monoester fraction (>95%), and a mixture fraction of wax di- and triesters (10.1%), free fatty acids (40.1%), and free fatty alcohols (49.8%). The influence of ultrasonic treatment on the properties of oleogels was assessed using light microscopy in polarized light, texture analysis, gas chromatography with flame ionization, and mass spectrometric detection. Ultrasonic treatment affected the crystallization of oleogels and led to the formation of smaller crystals. At the same time, sonication led to both an increase and a decrease in the firmness of oleogels, depending on the composition of the gelator. As regards volatile compounds, a total of 121 fragrant substances were identified in all samples, including such groups as alkanes, alkenes, alkadienes, alkynes, alkadiynes, alcohols, ketones, aldehydes, terpenes, alkyl alkane, and alkyl benzene derivatives. Ultrasonic treatment caused formation of new volatile unsaturated compounds. Some of them are known to have an unpleasant odor and thus might be responsible for the extraneous odor formation in studied fatty systems. Those were mainly (E)-2-octene, 1-heptene, 1,3-butadiene, and 1,3-octadiene in all oleogel samples. Sonicated samples B and C additionally had but-1-en-3-yne, pentenyne, and 1,3-butadiyne, whose odor can also be characterized as extraneous and distasteful. Several volatile compounds, supposed to be products of lipid oxidation, were also identified. Here we assume a reasonable approach is needed when selecting sonication conditions to prevent undesirable taste and flavor in oleogels and oleogel-based food products.

Designing New Sport Supplements Based on Aronia melanocarpa and Bee Pollen to Enhance Antioxidant Capacity and Nutritional Value

With a high number of athletes using sport supplements targeting different results, the need for complex, natural and effective formulations represents an actual reality, while nutrition dosing regimens aiming to sustain the health and performance of athletes are always challenging. In this context, the main goal of this study was to elaborate a novel and complex nutraceutical supplement based on multiple bioactive compounds extracted from Aronia melanocarpa and bee pollen, aiming to support physiological adaptations and to minimize the stress generated by intense physical activity in the case of professional or amateur athletes. Our proposed formulations are based on different combinations of Aronia and bee pollen (A1:P1, A1:P2 and A2:P1), offering personalized supplements designed to fulfill the individual requirements of different categories of athletes. The approximate composition, fatty acid profile, identification and quantification of individual polyphenols, along with the antioxidant capacity of raw biological materials and different formulations, was performed using spectrophotometric methods, GS-MS and HPLC-DAD-MS-ESI+. In terms of antioxidant capacity, our formulations based on different ratios of bee pollen and Aronia were able to act as complex and powerful antioxidant products, highlighted by the synergic or additional effect of the combinations. Overall, the most powerful synergism was obtained for the A1:P2 formulation.

Waxy Oleogels for Partial Substitution of Solid Fat in Margarines

One of the research directions of oleogels is to study the possibility of their practical application in the food industry as an alternative to solid fats. In this work, the possibility of replacing solid fat in margarine (fat content 82.5%) with oleogels was evaluated. The oleogel content varied from 10 to 50% of the fat phase. The concentration of gelator for which beeswax or wax components (9:1 combination of beeswax and hydrocarbons) were used represented 3% in oleogels. The fatty acid composition of the fat components used, their textural characteristics, and their color were studied. The following physicochemical and rheological properties of margarines were determined: color values, textural and thermal characteristics, and sensory properties. The data obtained were processed using principal component analysis (PCA). Oleogels were characterized by lower textural properties compared to commercial fat (CF), but a lower content of saturated fatty acids. When using oleogels, the color characteristics of the margarines changed insignificantly. A decrease in textural and organoleptic properties was shown when using more than 30% oleogel in the composition of margarines. It was found that an increase in the proportion of oleogel leads to a decrease in the melting enthalpy of margarines. The margarines, depending on the ratio of oleogel in the fat phase, were characterized by a content of saturated fatty acids reduced by 7-35% and increased by a 18-92% level of polyunsaturated fatty acids. Thus, the application of oleogels in margarine technology makes it possible to adjust the fatty acid composition while improving the physicochemical properties.

Characteristics of contaminants in the polish-origin bee products and cancer risk assessment

The aim of this study was to evaluate the concentration of 5-hydroxymethylfurfural (HMF), furfural, polycyclic aromatic hydrocarbons (PAHs), and pesticide residues, as well as assessment of cancer risk of the Polish-origin bee products. The bee product samples were prepared using a modified QuEChERS method, then PAHs and pesticides were analysed by gas chromatography-mass spectrometry (GC-MS), neonicotinoids by high-performance liquid chromatography with a diode array detector (HPLC-DAD), and HMF and furfural by spectrophotometry (HPLC-UV/Vis). The results showed that the highest furfural content was found in bee bread from the northeast part of Poland; moreover, samples obtained from the same region were also characterized with a higher level of HMF. The total sum of PAHs ranged from 324.0 to 866.4 μg/kg; the highest content of PAH4 (the sum of benzo[a]anthracene, chrysene, benzo[b]fluoranthene and benzo[a]pyrene) was 21.0 μg/kg, but only benzo[a]anthracene and chrysene were detected in the samples. Imidacloprid and acetamiprid were found only in bee bread from the northeast part of Poland, while clothianidin was detected in honey samples. The acceptable cancer risk has been calculated for PAHs due to ingestion of honey, while increasing the risk of cancer was calculated for bee bread and bee pollen. Due to the high concentration of PAHs and excessively high recommended consumption dose, regular consumption of bee bread and pollen may pose a severe threat to human health and should be strictly limited.

Bee Pollen as Functional Food: Insights into Its Composition and Therapeutic Properties

Bee pollen is a hive product made up of flower pollen grains, nectar, and bee salivary secretions that beekeepers can collect without damaging the hive. Bee pollen, also called bee-collected pollen, contains a wide range of nutritious elements, including proteins, carbs, lipids, and dietary fibers, as well as bioactive micronutrients including vitamins, minerals, phenolic, and volatile compounds. Because of this composition of high quality, this product has been gaining prominence as a functional food, and studies have been conducted to show and establish its therapeutic potential for medical and food applications. In this context, this work aimed to provide a meticulous summary of the most relevant data about bee pollen, its composition—especially the phenolic compounds—and its biological and/or therapeutic properties as well as the involved molecular pathways.

The colors of Tuscan bee pollen: phytochemical profile and antioxidant activity

Bee pollen's nutritional and beneficial health properties depend on the botanical origin and storage conditions. Palynological analysis determines the botanical composition of the multiflora and colour fractions. This study aimed to characterize the phytochemical profile and antioxidant activity of Tuscan bee pollen stored at freezing temperature for 2 years to verify the preservation of nutraceutical properties of the multiflora and colour fractions. Polyphenols, flavonoids content, antioxidant activity and volatile compounds profiles were measured. Non-terpene derivatives (acids and aldehydes) represented the main class of volatile compounds in most analysed samples. Among the colour fractions, coral showed significant differences in the antioxidant compounds. In the multiflora were also determined the soluble sugar content (128.33 mg/g of fresh weight) and mineral content, with the prevalence of K, organic N and Ca. The results suggest that the freezing storage of bee pollen for a long period can be still used as food.

Detailed chemical analysis of honey bee (Apis mellifera) worker brood volatile profile from egg to emergence

Chemical communication is a widely used mode of communication for social insects and has been demonstrated to be involved in many behaviours and physiological processes such as reproduction, nutrition or the fight against parasites and pathogens. In the honey bee, Apis mellifera, the release of chemical compounds by the brood plays a role in worker behaviour, physiology, and foraging activities and colony health as a whole. Several compounds have already been described as brood pheromones, such as components of the brood ester pheromone and (E)-β-ocimene. Several other compounds originating from diseased or varroa-infested brood cells have been described as triggering the hygienic behaviour of workers. So far, studies of brood emissions have focused on specific stages of development and little is known about the emission of volatile organic compounds by the brood. In this study, we investigate the semiochemical profile of worker honey bee brood during its whole developmental cycle, from egg to emergence, with a specific focus on volatile organic compounds. We describe variation in emissions of thirty-two volatile organic compounds between brood stages. We highlight candidate compounds that are particularly abundant in specific stages and discuss their potential biological significance.

Alasmari E, Ghramh HA, Khan KA, Mohammed MEA, Sager Alotaibi M, El-Niweiri MAA, Hamdi Assiri A, Khayyat MM. Effect of Storage Time and Floral Origin on the Physicochemical Properties of Beeswax and the Possibility of Using It as a Phase Changing Material in the Thermal Storage Energy Technology

Beeswax is a natural product that is primarily produced by honey bees of the genus Apis. It has many uses in various kinds of industries, including pharmacy and medicine. This study investigated the effect of storage and floral origin on some physicochemical properties of four beeswax samples. The floral origin of the beeswax samples was determined microscopically and the investigated physical properties were the melting point, color, surface characteristics and thermal behavior. The studied chemical constituents were the acid value, ester value, saponification value and the ester/acid ratio. The FT-IR, SEM, EDX, XRD and TGF techniques were applied to meet the objectives of this study. The physical properties of the beeswax were affected by the storage period and floral origin. The melting point of the beeswax samples significantly increased with the increase in the storage time, from 61.5 ± 2.12 °C for the 3 month sample to 74.5 ± 3.54 °C for the 2 year stored sample (p-value = 0.027). The acid values of the 3 month, 6 month, 1 year and 2 years stored samples were 19.57 ± 0.95, 22.95 ± 1.91, 27 ± 1.91 and 34.42 ± 0.95 mgKOH/g, respectively. The increase in the acid value was significant (p-value = 0.002). The ester values of the studied beeswax samples significantly increased with the increase in storage time as follows: 46.57 ± 2.86 mgKOH/g for the 3 month stored sample, 66.14 ± 3.82 mgKOH/g for the 6 month stored sample, 89.77 ± 0.95 mgKOH/g for the one year stored sample and 97.19 ± 1.91 mgKOH/g for the 2 year stored sample (p-value ≤ 0.001). Similarly, the saponification value and the carbon percentages increased with the increase in storage time. Unlike the results of the chemical components, the oxygen percentage decreased with the increase in storage time as follows: 11.24% (3 month), 10.31% (6 month), 7.97% (one year) and 6.74% (two year). The storage and floral origin of beeswax significantly affected its physicochemical properties in a way that qualify it to act as a phase changing material in the thermal storage energy technology.

Honey as an Adjuvant in the Treatment of COVID-19 Infection: A Review

Since ancestor times, honey has been used to promote human health due to its medicinal, and nutritious properties, mainly due to bioactive compounds present, such as phenolic compounds. The emergence of COVID-19, caused by the SARS-CoV-2 virus, led to the pursuit of solutions for the treatment of symptoms and/or disease. Honey has proven to be effective against viral infections, principally due to its potential antioxidant and anti-inflammatory activities that attenuate oxidative damage induced by pathogens, and by improving the immune system. Therefore, the aim of this review is to overview the abilities of honey to attenuate different COVID-19 symptoms, highlighting the mechanisms associated with these actions and relating the with the different bioactive compounds present. A brief, detailed approach to SARS-CoV-2 mechanism of action is first overviewed to allow readers a deep understanding. Additionally, the compounds and beneficial properties of honey, and its previously application in other similar diseases, are detailed in depth. Despite the already reported efficacy of honey against different viruses and their complications, further studies are urgently needed to explain the molecular mechanisms of activity against COVID-19 and, most importantly, clinical trials enrolling COVID-19 patients.

Analysis of Volatiles in Food Products

The evaluation of volatiles in food is an important aspect of food production. It gives knowledge about the quality of foods and their relationship to consumers’ choices. Alcohols, aldehydes, acids, esters, terpenes, pyrazines, and furans are the main chemical groups that are involved in aroma formation. They are products of food processing: thermal treatment, fermentation, storage, etc. Food aroma is a mixture of varied molecules. Because of this, the analysis of aroma composition can be challenging. The four main steps can be distinguished in the evaluation of the volatiles in the food matrix as follows: (1) isolation and concentration; (2) separation; (3) identification; and (4) sensory characterization. The most commonly used techniques to separate a fraction of volatiles from non-volatiles are solid-phase micro-(SPME) and stir bar sorptive extractions (SBSE). However, to study the active components of food aroma by gas chromatography with olfactometry detector (GC-O), solvent-assisted flavor evaporation (SAFE) is used. The volatiles are mostly separated on GC systems (GC or comprehensive two-dimensional GCxGC) with the support of mass spectrometry (MS, MS/MS, ToF–MS) for chemical compound identification. Besides omics techniques, the promising part could be a study of aroma using electronic nose. Therefore, the main assumptions of volatolomics are here described.