Demulsification of Heavy Oil-in-Water Emulsion by a Novel Janus Graphene Oxide Nanosheet: Experiments and Molecular Dynamic Simulations

Facile Synthesis of Novel Magnetic Janus Graphene Oxide for Efficient and Recyclable Demulsification of Crude Oil-in-Water Emulsion

Nanoparticles have been widely applied to treat emulsion-containing wastewater in the form of chemical demulsifiers, such as SiO2, Fe3O4, and graphene oxide (GO). Owing to their asymmetric structures and selective adsorption, Janus nanoparticles show greater application potential in many fields. In the present work, the novel magnetic Janus graphene oxide (MJGO) nanoparticle was successfully prepared by grafting magnetic Fe3O4 to the surface of the JGO, and its demulsifying ability to treat a crude oil-in-water emulsion was evaluated. The MJGO structure and its magnetic intensity were verified by Fourier-transform infrared spectra (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD), and magnetization saturation (MS) tests. Compared with GO and JGO, MJGO displayed the superior efficiency (>96%) to demulsify the crude oil-in-water emulsion, which can be attributed to the reduced electrostatic repulsion between MJGO and the emulsion droplets. Furthermore, the effects of pH and temperature on the demulsification performance of MJGO were also studied. Lastly, the recyclability of MJGO largely reduced the cost of demulsifiers in separating crude oil and water. The current research presents an efficient and recyclable demulsifier, which provides a new perspective for the structural design of nanomaterials and their application in the field of demulsification.

Effect of Anionic Surfactants on the Oil-Water-Rock Interactions by an Improved Washburn Method

The complex and variable structure of subsurface oil reservoirs as well as the small pore throat size of reservoirs make it extremely important to investigate the effect of oil-water-rock interactions for enhancing oil recovery. In this paper, the powder wettability of oil sand with different polar solvents was investigated using the improved Washburn capillary rise method, and the surface free energy of oil sand was calculated in combination with the OWRK method. In addition, the wettability of anionic surfactants HABS and PS solutions on the surface of oil sand was determined, and it showed that their wetting rates showed different trends after CMC (critical micelle concentration). The C×cosθ value of HABS decreased significantly with increasing concentration, whereas PS showed little changes. This may be related to the aggregate structure formed by HABS on the oil sand surface. Meanwhile, the interfacial free energy between crude oil and oil sand was obtained by crude oil-to-oil sand wetting experiments, and found that the wetting rate of crude oil to oil sand was much lower than that of solvents and surfactants. In combination with the above results and the oil-water interfacial tension (IFT), the oil-water-rock three-phase contact angle and the work of adhesion between the crude oil and the solid were obtained by Young's equation. From the three-phase contact angle results, it can be found that the contact angle values of both HABS and PS are obviously higher than that of the simulated water, and both HABS and PS have the ability to significantly reduce the work of adhesion, which shows a strong ability to strip the oil film on the surface of the solid. The research results of this paper are helpful to understand the oil displacement mechanism of chemical flooding in reservoir pores, which is of great significance for improving oil recovery.

Fabrication of a Janus Copper Mesh by SiO2 Spraying for Unidirectional Water Transportation and Oil/Water Separation

Massive discharge of oily wastewater and frequent occurrence of offshore oil spills have posed an enormous threat to the socioeconomic and ecological environments. Janus membranes with asymmetric wettability properties have great potential for oil/water separation applications and have attracted widespread attention. However, existing Janus membranes still suffer from complex and costly manufacturing processes, low permeability, and poor recyclability. Herein, a novel and facile strategy was proposed to fabricate a Janus copper mesh with opposite wettability for unidirectional water transport and efficient oil/water separation. The hydrophilic side of the Janus copper mesh was prepared by coating it with Cu(OH)2 nanoneedles via a chemical oxidation method. The hydrophobic side was fabricated by coating it with hydrophobic SiO2 nanoparticles via a facile spraying method. The as-prepared Janus copper mesh showed asymmetric surface wettability, which can achieve unidirectional water transport and efficient oil/water separation with excellent recyclability, exhibiting great application potential for droplet manipulation and wastewater purification.

Effect of Wax Composition and Shear Force on Wax Aggregation Behavior in Crude Oil: A Molecular Dynamics Simulation Study

To explore the influence of different wax components and the shear effect exerted by the pump and pipe wall in the process of crude oil pipeline transportation on the microbehavior of wax aggregation in crude oil at low temperatures, molecular dynamics models of binary and multivariate systems of crude oil with different wax components are established in this paper. The simulation results are compared with the existing experimental results and the NIST database to verify the rationality and accuracy of the models. By using the established binary model to simulate four crude oil systems containing different wax components, it can be found that the longer the wax molecular chain, the more easily the wax molecules aggregate. The influence of temperature on the aggregation process of wax molecules with different chain lengths is also studied. The lower the temperature, the greater the difference in wax molecular aggregation degree caused by the difference in molecular chain length. Nonequilibrium molecular dynamics is used to simulate the shear process of a multivariate system of crude oil, and the micromechanisms of the shear effect on the aggregation process of wax molecules are studied. Shearing can destroy the stable structure of crude oil, resulting in the orientation and conformational transformation of wax molecules, and obtaining the region of wax molecules sensitive to temperature and shear effects, the temperatures of which are below the wax precipitation point and the shear rate of which is lower than the maximum shear rate to prevent the molecular structure from being destroyed. At the same time, the sensitivity of wax components with different chain lengths to the shear effect is studied. The research results provide theoretical guidance for ensuring the safe and economic operation of waxy crude oil production.