Carotenoid Production from Microalgae: The Portuguese Scenario

Light Influences the Growth, Pigment Synthesis, Photosynthesis Capacity, and Antioxidant Activities in Scenedesmus falcatus

Light plays a significant role in microalgae cultivation, significantly influencing critical parameters, including biomass production, pigment content, and the accumulation of metabolic compounds. This study was intricately designed to optimize light intensities, explicitly targeting enhancing growth, pigmentation, and antioxidative properties in the green microalga, Scenedesmus falcatus (KU.B1). Additionally, the study delved into the photosynthetic efficiency in light responses of S. falcatus. The cultivation of S. falcatus was conducted in TRIS-acetate-phosphate medium (TAP medium) under different light intensities of 100, 500, and 1000 μmol photons m-2·s-1 within a photoperiodic cycle of 12 h of light and 12 h of dark. Results indicated a gradual increase in the growth of S. falcatus under high light conditions at 1000 μmol photons m-2·s-1, reaching a maximum optical density of 1.33 ± 0.03 and a total chlorophyll content of 22.67 ± 0.2 μg/ml at 120 h. Conversely, a slower growth rate was observed under low light at 100 μmol photons m-2·s-1. However, noteworthy reductions in the maximum quantum yield (Fv/Fm) and actual quantum yield (Y(II)) were observed under 1000 μmol photons m-2·s-1, reflecting a decline in algal photosynthetic efficiency. Interestingly, these changes under 1000 μmol photons m-2·s-1 were concurrent with a significant accumulation of a high amount of beta-carotene (919.83 ± 26.33 mg/g sample), lutein (34.56 ± 0.19 mg/g sample), and canthaxanthin (24.00 ± 0.38 mg/g sample) within algal cells. Nevertheless, it was noted that antioxidant activities and levels of total phenolic compounds (TPCs) decreased under high light at 1000 μmol photons m-2·s-1, with IC50 of DPPH assay recorded at 218.00 ± 4.24 and TPC at 230.83 ± 86.75 mg of GAE/g. The findings suggested that the elevated light intensity at 1000 μmol photons m-2·s-1 enhanced the growth and facilitated the accumulation of valuable carotenoid pigment in S. falcatus, presenting potential applications in the functional food and carotenoid industry.

The Clinical Promise of Microalgae in Rheumatoid Arthritis: From Natural Compounds to Recombinant Therapeutics

Rheumatoid arthritis (RA) is an invalidating chronic autoimmune disorder characterized by joint inflammation and progressive bone damage. Dietary intervention is an important component in the treatment of RA to mitigate oxidative stress, a major pathogenic driver of the disease. Alongside traditional sources of antioxidants, microalgae-a diverse group of photosynthetic prokaryotes and eukaryotes-are emerging as anti-inflammatory and immunomodulatory food supplements. Several species accumulate therapeutic metabolites-mainly lipids and pigments-which interfere in the pro-inflammatory pathways involved in RA and other chronic inflammatory conditions. The advancement of the clinical uses of microalgae requires the continuous exploration of phytoplankton biodiversity and chemodiversity, followed by the domestication of wild strains into reliable producers of said metabolites. In addition, the tractability of microalgal genomes offers unprecedented possibilities to establish photosynthetic microbes as light-driven biofactories of heterologous immunotherapeutics. Here, we review the evidence-based anti-inflammatory mechanisms of microalgal metabolites and provide a detailed coverage of the genetic engineering strategies to enhance the yields of endogenous compounds and to develop innovative bioproducts.

Ultrasound-assisted extraction of bioactive pigments from Spirulina platensis in natural deep eutectic solvents

Spirulina platensis biopigments have been documented as a potential source of nutritional, physiological, and pharmacological purposes due to the presence of bioactive pigments, total phenolic content (TPC) and the consequent antioxidant activity that these compounds present. Bioextracts market has increased in the last decades and is a key option for replacing fossil-derived products and promote the transition for a bio-based economy. To take advantage of these compounds more effectively, optimized extraction processes must be researched and used in biomass sources. The present study focused on optimizing the ultrasound-assisted extraction (UAE) using response surface methodology. Three factor and three level Box-Behnken design was used to optimize the extraction of bioactive pigments, and to investigate the effects of three independent variables, x 1: extraction temperature (40-60 °C), x 2: extraction cycle time (20-40 min), and x 3: solvent-to-biomass ratio (50-70 mL/mg) on total pigment yield, antioxidant assay, and TPC (dependent variables). A second-order polynomial model was used for predicting the responses. Statistically, the model was validated using an analysis of variance. Results revealed that ultrasound-assisted temperature, time, and solvent-to-biomass ratio had a significant (p < 0.05) influence on the total pigment yield, while temperature and solvent-to-biomass ratio had a significant influence in the antioxidant activity, and temperature significantly influenced the total pigment yield. For total pigment yield, antioxidant activity, and total phenol content, theR 2 values of the models generated were 0.8627, 0.8460, and 0.9003, respectively, indicating that the models developed based on second-order polynomials were satisfactorily accurate for analyzing interactions between parameters. Desirability functions showed that the optimal extraction parameters were temperature: 60 °C, extraction cycle time: 20 min; and a solvent-to-biomass ratio of 70 mL/mg. Under optimal conditions, experimental values for total pigment yield, total phenol content expressed as gallic acid equivalent (GAE), and antioxidant activity expressed as Trolox equivalent (TRE) were: 165.19 ± 1.01 mg/g Dry Matter (DM), 36.50 ± 0.98 mg GAE/g DM, and 37.98 ± 0.58 mg TRE/g DM, respectively. The experimental values showed a good agreement with the predicted values with residual standard low 1% under optimum conditions. This optimized ultrasound-assisted method in natural eutectic solvents is effective and scalable to a green extraction of the bioactive pigments from Spirulina platensis with potential application to food, pharmaceutical, functional materials, and packaging.

Quantitative Profiling of Carotenoids, Tocopherols, Phytosterols, and Fatty Acids in the Flower Petals of Ten Marigold (Tagetes spp. L.) Cultivars

Marigold (Tagetes spp.) flower petals are the most vital sources of carotenoids, especially lutein esters, for the production of natural lutein to use for food, feed, and pharmaceutical industries. Several marigold cultivars are cultivated globally; however, their lutein ester composition and contents have not been widely investigated. Considering this, this study aimed to identify and quantify prominent carotenoid esters from the flower petals of ten marigold cultivars by liquid chromatography (LC)-diode-array detection (DAD)-mass spectrometry (MS). In addition, tocopherols, phytosterols, and fatty acids were analyzed by gas chromatography (GC)-flame ionization detection (FID) and GC-MS. Furthermore, the 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS•+) and 2,2-diphenyl-1-picrylhydrazyl (DPPH•) radical scavenging abilities of lipophilic extracts were determined. The total carotenoid contents varied significantly (p < 0. 05, Tukey HSD) among cultivars, ranging from 25.62 (cv. Alaska)-2723.11 µg/g fresh weight (cv. Superboy Orange). Among the five major lutein-diesters, (all-E)-lutein-3-O-myristate-3'-O-palmitate and lutein dipalmitate were predominant. Among the studied cultivars, α-tocopherol was recorded, ranging from 167.91 (cv. Superboy Yellow) to 338.50 µg/g FW (cv. Taishan Orange). Among phytosterols, β-sitosterol was the most prevalent phytosterol, ranging between 127.08 (cv. Superboy Yellow) and 191.99 µg/g FW (cv. Taishan Yellow). Palmitic acid (C16:0; 33.36-47.43%) was the most dominant among the fatty acids. In this study, the highest contents of lutein were recorded from cv. Superboy Orange; however, due to the substantially higher flower petal yield, the cv. Durango Red can produce the highest lutein yield of 94.45 kg/ha. These observations suggest that cv. Durango Red and cv. Superboy Orange are the ideal candidates for lutein fortification in foods and also for commercial lutein extraction.

Natural Carotenoids: Recent Advances on Separation from Microbial Biomass and Methods of Analysis

Biotechnologically produced carotenoids occupy an important place in the scientific research. Owing to their role as natural pigments and their high antioxidant properties, microbial carotenoids have been proposed as alternatives to their synthetic counterparts. To this end, many studies are focusing on their efficient and sustainable production from renewable substrates. Besides the development of an efficient upstream process, their separation and purification as well as their analysis from the microbial biomass confers another important aspect. Currently, the use of organic solvents constitutes the main extraction process; however, environmental concerns along with potential toxicity towards human health necessitate the employment of "greener" techniques. Hence, many research groups are focusing on applying emerging technologies such as ultrasounds, microwaves, ionic liquids or eutectic solvents for the separation of carotenoids from microbial cells. This review aims to summarize the progress on both the biotechnological production of carotenoids and the methods for their effective extraction. In the framework of circular economy and sustainability, the focus is given on green recovery methods targeting high-value applications such as novel functional foods and pharmaceuticals. Finally, methods for carotenoids identification and quantification are also discussed in order to create a roadmap for successful carotenoids analysis.

Food Wastes and Microalgae as Sources of Bioactive Compounds and Pigments in a Modern Biorefinery: A Review

The United Nations 2030 Agenda for Sustainable Development has created more pressure on countries and society at large for the development of alternative solutions for synthetic and fossil fuel derived products, thus mitigating climate change and environmental hazards. Food wastes and microalgae have been studied for decades as potential sources of several compounds that could be employed in various fields of application from pharmaceutical to textile and packaging. Although multiple research efforts have been put towards extracting rich compounds (i.e., phenolic compounds, tocopherols, and tocotrienols) from these sources, they still remain overlooked as two major sources of bioactive compounds and pigments, mainly due to inefficient extraction processes. Hence, there is a growing need for the development of optimized extraction methods while employing non-organic solvent options following the main principles of green chemistry. This review will focus on delivering a clear and deep analysis on the existing procedures for obtaining bioactive compounds and pigments from food wastes derived from the most consumed and produced fruit crops in the world such as apples, oranges, cherries, almonds, and mangoes, and microalgal biomass, while giving light to the existing drawbacks in need to be solved in order to take full advantage of the rich properties present in these two major biorefinery sources.

Obtaining Bioproducts from the Studies of Signals and Interactions between Microalgae and Bacteria

The applications of microalgae biomass have been widely studied worldwide. The classical processes used in outdoor cultivations of microalgae, in closed or open photobioreactors, occur in the presence of bacteria. Understanding how communication between cells occurs through quorum sensing and evaluating co-cultures allows the production of microalgae and cyanobacteria to be positively impacted by bacteria, in order to guarantee safety and profitability in the production process. In addition, the definition of the effects that occur during an interaction, promotes insights to improve the production of biomolecules, and to develop innovative products. This review presents the interactions between microalgae and bacteria, including compounds exchanges and communication, and addresses the development of new pharmaceutical, cosmetic and food bioproducts from microalgae based on these evaluations, such as prebiotics, vegan skincare products, antimicrobial compounds, and culture media with animal free protein for producing vaccines and other biopharmaceutical products. The use of microalgae as raw biomass or in biotechnological platforms is in line with the fulfillment of the 2030 Agenda related to the Sustainable Development Goals (SDGs).

Improving the content of high value compounds in Nordic Desmodesmus microalgal strains

Nordic Desmodesmus microalgal strains (2-6) and (RUC-2) were exposed to abiotic stress (light and salt) to enhance lipids and carotenoids. The biomass output of both strains increased by more than 50% during light stress of 800 μmol m^-2 s^-1 compared to control light. The biomass of Desmodesmus sp. (2-6) contained most lipids (15% of dry weight) and total carotenoids (16.6 mg g^-1) when grown at moderate light stress (400 μmol m^-2 s^-1), which further could be enhanced up to 2.5-fold by salinity stress. Desmodesmus sp. (RUC-2) exhibited maximal lipid (26.5%) and carotenoid (43.8 mg L^-1) content at light intensities of 400 and 100 μmol m^-2 s^-1, respectively. Salinity stress stimulated lipid accumulation by 39%. Nordic Desmodesmus strains therefore are not only able to tolerate stress conditions, but their biomass considerably improves under stress. These strains have high potential to be used in algal bio-factories on low-cost medium like Baltic seawater.