Use of a Hydrophobic Azo Dye for the Centrifuge-Less Cloud Point Extraction-Spectrophotometric Determination of Cobalt

Development of a high-performance optical sensor for sensitive detection of cobalt ions in pharmaceutical, food, biological, and environmental samples

A re-generable optical chemical sensing film was created using a modified chitosan film that incorporates immobilized 4-(thiazol-2-yldiazenyl) benzene-1,3-diol (TDBD) for the detection of Co2+ in acidic aqueous solutions. Upon exposure to Co2+, the film's color shifted from yellowish green to red by forming a complex between Co2+ and TDBD. The sensor's complex was measured at 574 nm, a wavelength where the sensing membrane exhibited minimal background interference. The film exhibited its highest responsiveness to cobalt ions at pH 5.0. Two sample volumes were analysed: 2.5 mL with a Co2+ concentration range of 8.0-140 ng/mL, and 250 mL with a concentration range of 2.4-15.2 ng/mL. Both sample sizes produced linear calibration curves, with detection limits of 2.5 and 0.7 ng/mL, respectively. The relative standard deviation was 1.35 % for six separate films in a 100 ng/mL Co2+ solution, and 0.87 % for six individual films in a 10 ng/mL solution using 2.5 and 250 ng/mL, respectively. The sensing films demonstrated good stability over 30 days and were successfully used to determine Co2+ in pharmaceutical, food, environmental, and biological samples, yielding satisfactory results compared to the ICP-AES method.

Mono- and Binuclear Complexes in a Centrifuge-Less Cloud-Point Extraction System for the Spectrophotometric Determination of Zinc(II)

The hydrophobic reagent 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR) was investigated as part of a cloud-point extraction (CPE) system for the spectrophotometric determination of Zn(II). In the system, complexes with different stoichiometries, including 1:1 and 2:2 (Zn:HTAR), are formed. Their ground-state equilibrium geometries were optimized at the B3LYP/6-31G level of theory. The obtained structures were then used to calculate vertical excitation energies in order to generate theoretical UV/Vis absorption spectra. The comparison between theoretical and experimental spectra demonstrated that, under optimal conditions, a binuclear complex containing oxygen-bridging atoms is the dominant species. The absorbance was found to be linearly dependent on the concentration of Zn(II) within the range of 15.7 to 209 ng mL-1 (R2 = 0.9996). The fraction extracted (%E), logarithm of the conditional extraction constant (log Kex), and molar absorption coefficient (ε) at λmax = 553 nm were calculated to be 98.3%, 15.9, and 4.47 × 105 L mol-1 cm-1, respectively. The method developed is characterized by simplicity, convenience, profitability, sensitivity, and ecological friendliness. It has been successfully applied to the analysis of pharmaceutical and industrial samples.

Development of Visible Spectrophotometric Methods for the Determination of Tricyclic Antidepressants Based on Formation of Molecular Complexes with p-Benzoquinones

Tricyclic antidepressants are commonly employed in the management of major depressive disorders. The present work describes two visible (VIS) spectrophotometric techniques that utilize the formation of charge transfer complexes between four antidepressant compounds, namely, amitriptyline hydrochloride (AMI), imipramine hydrochloride (IMI), clomipramine hydrochloride (CLO), and trimipramine maleate (TRI) acting as electron donors and two p-benzoquinones, namely, p-chloranilic acid (pCA) and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), serving as electron acceptors. The stoichiometry of the compounds produced exhibited a consistent 1:1 ratio in all instances, as established by Job's method. Molar absorptivities, equilibrium association constants, and several other spectroscopic properties were determined for all complexes. The developed spectrophotometric techniques were validated intra-laboratory and successfully applied for quantitative assessment of the four antidepressant active ingredients in several commercial pharmaceutical formulations. The methods are relatively simple, fast, and use readily available laboratory instrumentation, making them easily applicable by most quality control laboratories worldwide.

Extractive Spectrophotometric Determination and Theoretical Investigations of Two New Vanadium(V) Complexes

Two new vanadium (V) complexes involving 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR) and tetrazolium cation were studied. The following commercially available tetrazolium salts were used as the cation source: tetrazolium red (2,3,5-triphenyltetrazol-2-ium;chloride, TTC) and neotetrazolium chloride (2-[4-[4-(3,5-diphenyltetrazol-2-ium-2-yl)phenyl]phenyl]-3,5-diphenyltetrazol-2-ium;dichloride, NTC). The cations (abbreviated as TT+ and NTC+) impart high hydrophobicity to the ternary complexes, allowing vanadium to be easily extracted and preconcentrated in one step. The complexes have different stoichiometry. The V(V)-HTAR-TTC complex dimerizes in the organic phase (chloroform) and can be represented by the formula [(TT+)[VO2(HTAR)]]2. The other complex is monomeric (NTC+)[VO2(HTAR)]. The cation has a +1 charge because one of the two chloride ions remains undissociated: NTC+ = (NT2+Cl-)+. The ground-state equilibrium geometries of the constituent cations and final complexes were optimized at the B3LYP and HF levels of theory. The dimer [(TT+)[VO2(HTAR)]]2 is more suitable for practical applications due to its better extraction characteristics and wider pH interval of formation and extraction. It was used for cheap and reliable extraction-spectrophotometric determination of V(V) traces in real samples. The absorption maximum, molar absorptivity coefficient, limit of detection, and linear working range were 549 nm, 5.2 × 104 L mol-1 cm-1, 4.6 ng mL-1, and 0.015-2.0 μg mL-1, respectively.

Innovative approaches in cloud-point extraction

Cloud-point extraction (CPE) is a pre-treatment technique for the extraction and preconcentration of different chemical compounds, such as metal ions, pesticides, drugs, phenols, vitamins etc., from various samples. CPE is based on the phenomenon of two phases (micellar and aqueous) forming after the heating of an aqueous isotropic solution of a non-ionic or zwitterionic surfactant above the cloud-point temperature. If analytes are added to the surfactant solution under suitable conditions, they should be extracted into the micellar phase, also called the surfactant-rich phase. Recently, the traditional CPE procedure is being increasingly replaced by improved CPE procedures. In this study, recent advances in CPE over the last three years (2020 - 2022), including the application of various innovative approaches, are reviewed. In addition to the basic principle of CPE, alternative extraction media in CPE, CPE supported by various auxiliary energies, a different modified CPE procedure and the use nanomaterials and solid-phase extraction in combination with CPE are presented and discussed. Finally, some future trends for improved CPE are presented.

Vanadium-Containing Anionic Chelate for Spectrophotometric Determination of Hydroxyzine Hydrochloride in Pharmaceuticals

Four azo dyes known to form anionic complexes with V(V) were investigated as potential liquid–liquid extraction–spectrophotometric reagents for the antihistamine medication hydroxyzine hydrochloride (HZH). A stable ion-association complex suitable for analytical purposes was obtained with 6-hexyl-4-(2-thiazolylazo)resorcinol (HTAR). The molar absorption coefficient, limit of detection, linear working range, and relative standard deviation in the analysis of real pharmaceutical samples (tablets and syrup) were 3.50 × 104 L mol−1 cm−1, 0.13 μg mL−1, 0.43–12.2 μg mL−1, and ≤2.7%, respectively. After elucidating the molar ratio in the extracted ion-association complex (HZH:V = 1:1), the ground-state equilibrium geometries of the two constituent ions—HZH+ and [VO2(HTAR)]−—were optimized at the B3LYP level of theory using 6-311++G** basis functions. The cation and anion were then paired in four different ways to find the most likely structure of the extracted species. In the lowest-energy structure, the VO2 group interacts predominantly with the heterochain of the cation. A hydrogen bond is present (V–O···H–O; 1.714 Å) involving the terminal oxygen of this chain.