Antifungal Agents in Wood Protection—A Review

The Utilization of Bacillus subtilis to Design Environmentally Friendly Living Paints with Anti-Mold Properties

The anti-fungal properties of the probiotic bacterium Bacillus subtilis have been studied extensively in agriculture and ecology, but their applications in the built environment remain to be determined. Our work aims to utilize this biological component to introduce new diverse anti-mold properties into paint. "Mold" refers to the ubiquitous fungal species that generate visible multicellular filaments commonly found in household dust. The development of mold leads to severe health problems for occupants, including allergic response, hypersensitivity pneumonitis, and asthma, which have significant economic and clinical outcomes. We here demonstrate the robust effect of a commercial paint enhanced with Bacillus subtilis cells against the common mold agent, Aspergillus niger, and identify three biosynthetic clusters essential for this effect. Our results lay the foundation for bio-convergence and synthetic biology approaches to introduce renewable and environmentally friendly bio-anti-fungal agents into the built environment.

Nanotechnology in wood science: Innovations and applications

Application of nanomaterials is gaining tremendous interest in the field of wood science and technology for value addition and enhancing performance of wood and wood-based composites. This review focuses on the use of nanomaterials in improving the properties of wood and wood-based materials and protecting them from weathering, biodegradation, and other deteriorating agents. UV-resistant, self-cleaning (superhydrophobic) surfaces with anti-microbial properties have been developed using the extraordinary features of nanomaterials. Scratch-resistant nano-coatings also improve durability and aesthetic appeal of wood. Moreover, nanomaterials have been used as wood preservatives for increasing the resistance against wood deteriorating agents such as fungi, termites and borers. Wood can be made more resistant to ignition and slower to burn by introducing nano-clays or nanoparticles of metal-oxides. The use of nanocellulose and lignin nanoparticles in wood-based products has attracted huge interest in developing novel materials with improved properties. Nanocellulose and lignin nanoparticles derived/synthesized from woody biomass can enhance the mechanical properties such as strength and stiffness and impart additional functionalities to wood-based products. Cellulose nano-fibres/crystals find application in wide areas of materials science like reinforcement for composites. Incorporation of nanomaterials in resin has been used to enhance specific properties of wood-based composites. This review paper highlights some of the advancements in the use of nanotechnology in wood science, and its potential impact on the industry.

Construction Strategy and Mechanism of a Novel Wood Preservative with Excellent Antifungal Effects

Wood is a naturally porous material prone to microbial erosion and degradation in outdoor environments. Therefore, the development of an environmentally friendly wood preservative with excellent antibacterial effects and low toxicity is urgently needed. In this study, nitrogen-doped carbon quantum dots (N-CQDs) with excellent antifungal performance and fluorescent properties were synthesized using a one-step hydrothermal method with chitosan quaternary ammonium salt (HACC) as the raw material. The fluorescence characteristics of N-CQD preservatives can help track their position and distribution in wood. The minimum inhibitory concentration (MIC) of N-CQDs is 1.8 mg/mL, which was nearly 22 times lower than that of HACC (40.0 mg/mL) in the PDA medium. The decay resistance test demonstrated that wood treated with N-CQDs showed a considerably reduced decay degree and its mass loss rate decreased from 46 ± 0.5% to 3.8 ± 0.5%. Biological transmission electron microscopy revealed that N-CQDs effectively destroyed fungal cell structures, thereby hindering the growth of Coriolus versicolor. N-CQDs synthesized using the one-step hydrothermal method can be used as an efficient wood preservative that can effectively improve the utilization and service life of wood.

The combined effect of essential oils on wood physico-chemical properties and their antiadhesive activity against mold fungi: application of mixture design methodology

In the heritage field, the microbial adhesion on wood, and consequently the formation of biofilm led to inestimable losses of historical and cultural monuments. Thereby, this study aimed to examine the combined effect of Thymus vulgaris, Myrtus communis, and Mentha pulegium essential oils on wood surface physico-chemical properties, and to elaborate the optimal mixture using the mixture design approach coupled to the contact angle method. It was found that both wood hydrophobicity and electron donor character increased significantly after treatment using an optimal mixture containing 57% and 43% of M. pulegium and M. communis essential oils, respectively. The theoretical and experimental fungal adhesion on untreated and treated wood were also investigated. The results showed that the adhesion was favorable on untreated wood and reduced using the optimal mixture. Moreover, the experimental data demonstrated that the same mixture exhibited an antiadhesive efficacy effect with a reduction of 36-75% in adhesion.

Antifungal activity and mechanism of action of natural product derivates as potential environmental disinfectants

There have been a considerable number of antifungal studies that evaluated natural products (NPs), such as medicinal plants and their secondary metabolites, (phenolic compounds, alkaloids), essential oils, and propolis extracts. These studies have investigated natural antifungal substances for use as food preservatives, medicinal agents, or in agriculture as green pesticides because they represent an option of safe, low-impact, and environmentally friendly antifungal compounds; however, few have studied these NPs as an alternative to disinfection/sanitation for indoor air or environmental surfaces. This review summarizes recent studies on NPs as potential fungal disinfectants in different environments and provides information on the mechanisms of inactivation of these products by fungi. The explored mechanisms show that these NPs can interfere with ATP synthesis and Ca++ and K+ ion flow, mainly damaging the cell membrane and cell wall of fungi, respectively. Another mechanism is the reactive oxygen species effect that damages mitochondria and membranes. Inhibition of the overexpression of the efflux pump is another mechanism that involves damage to fungal proteins. Many NPs appear to have potential as indoor environmental disinfectants.

ONE-SENTENCE SUMMARY

This review shows the latest advances in natural antifungals applied to different indoor environments. Fungi have generated increased tolerance to the mechanisms of traditional antifungals, so this review also explores the various mechanisms of action of various natural products to facilitate the implementation of technology.

The Impact of Microorganisms on the Performance of Linseed Oil and Tung Tree Oil Impregnated Composites Made of Hemp Shives and Corn Starch

In this study, the performance characteristics of hemp shives impregnated with linseed oil and tung tree oil (HS)- and corn starch (CS)-based biocomposites containing flame retardants were evaluated before and after treatment with the mixture of bacterium Pseudomonas putida and fungus Rhizopus oryzae. Enzymatic activities and physical-mechanical properties such as water absorption, thickness swelling, compressive strength, and thermal conductivity were tested to evaluate the suitability of selected composites for thermal insulation purposes. In addition, electron microscopy was used to investigate the impact of microorganisms on the microstructure of the material. It was determined that the type of oil used for impregnation significantly affects the properties of biocomposites after 6 months of incubation with mixture of bacterium P. putida and fungus Rh. oryzae. Biocomposites impregnated with linseed oil and after treatment with a mixture of microorganisms had cellulase activity of 25 U/mL, endo β-1-4-glucanase activity of 26 U/mL, lipase activity of 101 U/mL, only a 10% decrease in compressive strength, 50% higher short-term water absorption, unchanged swelling in thickness, and slightly decreased thermal conductivity compared to control biocomposites. At the same time, biocomposites with tung tree oil had a much more pronounced deterioration of the properties tested, cellulase activity of 28 U/mL, endo β-1-4-glucanase activity of 37 U/mL, lipase activity of 91 U/mL, two times lower compressive strength and two times higher short-term water absorption, 2.5 times greater thickness swelling, and a slightly increased thermal conductivity. We conclude that linseed oil provides better protection against the action of microorganisms compared to impregnation with tung tree oil.

Effect of Various Mentha sp. Extracts on the Growth of Trichoderma viride and Chaetomium globusom on Agar Medium and Pine Wood

This paper presents the effect of water extracts from the leaves of various Mentha spp. on the growth of selected fungi causing the gray decay of wood. The study determined which of the Mentha spp. extracts used had the best effect on inhibiting the development of fungi on various substrates including pine wood. The best results in the complete inhibition of fungi growth on an agar medium were obtained for the M. × piperita ‘Almira’ extract. Biocidal properties were not achieved on wood samples, although it was noticed that at doses of extracts of 600 g/m2 and higher, the growth of fungi in the initial stages of cultivation was clearly inhibited. Chemical substances in the obtained extracts were characterized by gas chromatography. Oxygen monoterpenes were the dominant group of substances, substances belonging to sesquiterpene hydrocarbons, monoterpene hydrocarbons containing oxygen sesquiterpenes, and one substance belonging to non-terpene hydrocarbons were also identified.

Moroccan Endemic Artemisia herba-alba Essential Oil: GC-MS Analysis and Antibacterial and Antifungal Investigation

In Morocco, the endemic Artemisia herba-alba is well known by its traditional uses and health benefits. The search for natural, safe, and effective antibacterial and antifungal agents from plants is in high demand due to microbial and fungal resistance to conventional synthetic antibiotics and antifungal drugs. In this study, the A. herba-alba was collected from the region of Fez-Boulemane during the periods of March, June, and September. Essential oils (EOs) were extracted from the aerial part of the plant by the hydrodistillation method. The chemical constituents were determined using GC-MS as analytical tools. The antimicrobial activities of different oils were tested using the macrodilution method. The results showed the difference in the yields between the three EOs (0.49, 1.74, 1.30% (mL/100 g)), respectively, as well as in their corresponding chemical compositions. The main constituents revealed by GC-MS are higher contents of oxygenated monoterpenes (84.7, 84.4, 81%), such as cis chrysanthenyl acetate (30, 26.7, 27.6%), β-thujone (23.2, 12.9, 15.4%), camphor (9.76, 14.3, 15.8%), chrysanthenone (2.4, 1, 14%), 1,8-cineole (1.5, 11.7, 11.8%), trans β-dihydroterpineol (7.8, 7.2, 6.9%), α-thujone (4.8, 3, 5.4%), and sesquiterpenic davanone (3.9, 1.5, 1.4%), respectively. The three EOs biological activities’ results showed significant antimicrobial effects against four bacteria tested (E. coli, B. subtilis, S. aureus, M. luteus), with the MIC values ranging from 0.1 to 0.03% (v/v), as well as interesting antifungal effects on both wood rot fungi against four fungi examined (G. trabeum, P. placenta, C. puteana, C. versicolor) and molds against three microorganisms tested (A. niger, P. digitatum, P. expansum), with MIC values ranging from 0.2 to 0.03% (v/v) and 0.4 to 0.03% (v/v), respectively. The June and September EO samples showed more potent activities than those collected during March. Our research findings showed quantitative variability in both EO contents and chemical compositions, which could be due to the phenological stages, climatic conditions of growth, and harvesting periods. The potent results of the antimicrobial/antifungal activities were provided by the EOs of June and September and might be correlated to the contribution and synergism effect of all oxygenated monoterpenes. These results support the possible application of A. herba-alba EOs as natural and safe antibacterial agents, and an effective alternative to synthetic drugs, enabling the prevention and treatment of certain pathogenic infections in food and health, and the preservation of wood alteration against fungi.

Gelatin and Chitosan as Meat By-Products and Their Recent Applications

Meat by-products such as bones, skin, horns, hooves, feet, skull, etc., are produced from slaughtered mammals. Innovative solutions are very important to achieving sustainability and obtaining the added value of meat by-products with the least impact on the environment. Gelatin, which is obtained from products high in collagen, such as dried skin and bones, is used in food processing, and pharmaceuticals. Chitosan is derived from chitin and is well recognized as an edible polymer. It is a natural product that is non-toxic and environmentally friendly. Recently, chitosan has attracted researchers' interests due to its biological activities, including antimicrobial, antitumor, and antioxidant properties. In this review, article, we highlighted the recent available information on the application of gelatin and chitosan as antioxidants, antimicrobials, food edible coating, enzyme immobilization, biologically active compound encapsulation, water treatment, and cancer diagnosis.

Alumina as an Antifungal Agent for Pinus elliottii Wood

This work deals with the durability of a Pinus elliotti wood impregnated with alumina (Al₂O₃) particles. The samples were impregnated at three different Al₂O₃ weight fractions (c.a. 0.1%, 0.3% and 0.5%) and were then exposed to two wood-rot fungi, namely white-rot fungus (Trametes versicolor) and brown-rot fungus (Gloeophyllum trabeum). Thermal and chemical characteristics were evaluated by Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric (TG) analyses. The wood which incorporated 0.3 wt% of Al₂O₃ presented a weight loss 91.5% smaller than the untreated wood after being exposed to the white-rot fungus. On the other hand, the highest effectiveness against the brown-rot fungus was reached by the wood treated with 5 wt% of Al₂O₃, which presented a mass loss 91.6% smaller than that of the untreated pine wood. The Al₂O₃-treated woods presented higher antifungal resistances than the untreated ones in a way that: the higher the Al₂O₃ content, the higher the thermal stability. In general, the impregnation of the Al₂O₃ particles seems to be a promising treatment for wood protection against both studied wood-rot fungi. Additionally, both FT-IR and TG results were valuable tools to ascertain chemical changes ascribed to fungal decay.