Elaboration, Characterization and Thermal Decomposition Kinetics of New Nanoenergetic Composite Based on Hydrazine 3-Nitro-1,2,4-triazol-5-one and Nanostructured Cellulose Nitrate

Simultaneous Production of Cellulose Nitrates and Bacterial Cellulose from Lignocellulose of Energy Crop

This study is focused on exploring the feasibility of simultaneously producing the two products, cellulose nitrates (CNs) and bacterial cellulose (BC), from Miscanthus × giganteus. The starting cellulose for them was isolated by successive treatments of the feedstock with HNO3 and NaOH solutions. The cellulose was subjected to enzymatic hydrolysis for 2, 8, and 24 h. The cellulose samples after the hydrolysis were distinct in structure from the starting sample (degree of polymerization (DP) 1770, degree of crystallinity (DC) 64%) and between each other (DP 1510-1760, DC 72-75%). The nitration showed that these samples and the starting cellulose could successfully be nitrated to furnish acetone-soluble CNs. Extending the hydrolysis time from 2 h to 24 h led to an enhanced yield of CNs from 116 to 131%, with the nitrogen content and the viscosity of the CN samples increasing from 11.35 to 11.83% and from 94 to 119 mPa·s, respectively. The SEM analysis demonstrated that CNs retained the fiber shape. The IR spectroscopy confirmed that the synthesized material was specifically CNs, as evidenced by the characteristic frequencies of 1657-1659, 1277, 832-833, 747, and 688-690 cm-1. Nutrient media derived from the hydrolyzates obtained in 8 h and 24 h were of good quality for the synthesis of BC, with yields of 11.1% and 9.6%, respectively. The BC samples had a reticulate structure made of interlaced microfibrils with 65 and 81 nm widths and DPs of 2100 and 2300, respectively. It is for the first time that such an approach for the simultaneous production of CNs and BC has been employed.

Promising Energetic Polymers from Nanostructured Bacterial Cellulose

This study investigated the nitration of nanostructured bacterial cellulose (NBC). The NBC, obtained using symbiotic Medusomyces gisevii Sa-12 as the microbial producer and then freeze-dried, was nitrated herein by two methods, the first using mixed sulphuric-nitric acids (MA) and the second using concentrated nitric acid in the presence of methylene chloride (NA+MC). The synthesized samples of NBC nitrates (NBCNs) exhibited 11.77-12.27% nitrogen content, a viscosity of 1086 mPa·s or higher, 0.7-14.5% solubility in an alcohol-ester mixture, and 0.002% ash. Scanning electron microscopy showed that the nitration compacted the NBC structure, with the original reticulate pattern of the structure being preserved in full. Infrared spectroscopy for the presence of functional nitro groups at 1658-1659, 1280, 838-840, 749-751 and 693-694 cm^-1 confirmed the synthesis of cellulose nitrates in particular. Thermogravimetric and differential thermal analyses showed the resultant NBCNs to have a high purity and high specific heats of decomposition of 6.94-7.08 kJ/g. The NBCN samples differ conceptually from plant-based cellulose nitrates by having a viscosity above 1086 mPa·s and a unique 3D reticulate structure that is retained during the nitration. The findings suggest that the NBCNs can be considered for use in novel high-tech materials and science-driven fields distinct from the application fields of plant-based cellulose nitrates. The NBCN sample obtained with NA+MC has the ability to generate an organogel when it is dissolved in acetone. Because of the said property, this NBCN sample can find use as a classical adhesive scaffold and an energetic gel matrix for creating promising energetic polymers.

Development and Characterization of New Energetic Composites Based on HNTO/AN Co-Crystal and Nitro-Cellulosic Materials

To develop advanced cellulose-based energetic composites, new types of high-energy-density formulations containing hydrazine 3-nitro-1,2,4-triazol-5-one (HNTO)/ammonium nitrate (AN) cocrystals combined with nitrocellulose or nanostructured cellulose nitrate (NC and NMCC) were experimentally characterized. The prepared energetic formulations were analyzed in terms of their physicochemical properties, mechanical sensitivities, structural features, and thermal behavior. Their heats of combustion and theoretical energetic performance were assessed as well. Experimental results exhibited the inherent characteristics of the designed NC@HNTO/AN and NMCC@HNTO/AN, including improved density, specific impulse, and impact sensitivity compared to their raw compounds. Besides that, thermo-kinetic findings revealed that the as-prepared insensitive and high-energy-density composites undergo two exothermic decomposition processes, and that NC@HNTO/AN has higher thermal activity. The present study demonstrated the outstanding characteristics of the new composites and could serve as a reference for developing more advanced cellulose-based energetic formulations.

Catalytic Pyrolysis of PET Polymer Using Nonisothermal Thermogravimetric Analysis Data: Kinetics and Artificial Neural Networks Studies

This paper presents the catalytic pyrolysis of a constant-composition mixture of zeolite β and polyethylene terephthalate (PET) polymer by thermogravimetric analysis (TGA) at different heating rates (2, 5, 10, and 20 K/min). The thermograms showed only one main reaction and shifted to higher temperatures with increasing heating rate. In addition, at constant heating rate, they moved to lower temperatures of pure PET pyrolysis when a catalyst was added. Four isoconversional models, namely, Kissinger−Akahira−Sunose (KAS), Friedman, Flynn−Wall−Qzawa (FWO), and Starink, were applied to obtain the activation energy (Ea). Values of Ea acquired by these models were very close to each other with average value of Ea = 154.0 kJ/mol, which was much lower than that for pure PET pyrolysis. The Coats−Redfern and Criado methods were employed to set the most convenient solid-state reaction mechanism. These methods revealed that the experimental data matched those obtained by different mechanisms depending on the heating rate. Values of Ea obtained by these two models were within the average values of 157 kJ/mol. An artificial neural network (ANN) was utilized to predict the remaining weight fraction using two input variables (temperature and heating rate). The results proved that ANN could predict the experimental value very efficiently (R2 > 0.999) even with new data.

Unraveling the Effect of MgAl/CuO Nanothermite on the Characteristics and Thermo-Catalytic Decomposition of Nanoenergetic Formulation Based on Nanostructured Nitrocellulose and Hydrazinium Nitro-Triazolone

The present study aims to develop new energetic composites containing nanostructured nitrocellulose (NNC) or nitrated cellulose (NC), hydrazinium nitro triazolone (HNTO), and MgAl-CuO nanothermite. The prepared energetic formulations (NC/HNTO/MgAl-CuO and NNC/HNTO/MgAl-CuO) were analyzed using various analytical techniques, such as Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), thermogravimetry (TGA), and differential scanning calorimetry (DSC). The outstanding catalytic impact of MgAl-CuO on the thermal behavior of the developed energetic composites was elucidated by kinetic modeling, applied to the DSC data using isoconversional kinetic methods, for which a considerable drop in the activation energy was acquired for the prepared formulations, highlighting the catalytic influence of the introduced MgAl-CuO nanothermite. Overall, the obtained findings demonstrated that the newly elaborated NC/HNTO/MgAl-CuO and NNC/HNTO/MgAl-CuO composites could serve as promising candidates for application in the next generation of composite explosives and high-performance propellants.