Removal of Malachite Green Dye from Aqueous Solution by Catalytic Wet Oxidation Technique Using Ni/Kaolin as Catalyst

Removal of malachite green from wastewater using date seeds as natural adsorbent; isotherms, kinetics, Thermodynamic, and batch adsorption process design

This research explores the feasibility of using date seeds (DS), an agricultural waste, for the adsorption of malachite green (MG) dye from synthesized wastewater. The characterization of the DS before and after adsorption was accomplished by FTIR, SEM, BET, and EDX measurements. Batch adsorption experiments were investigated for MG dye adsorption from aqueous solution onto the DS. The effect of different parameters such as solution pH, adsorbent dose, contact time, temperature, and the initial dye concentration were studied. The optimum pH, adsorbent dose, temperature, and contact time for the dye removal were found to be 5, 0.1 g, 25 °C, and 30 min, respectively. The equilibrium studies for the data with Langmuir, Freundlich, and Temkin isotherms showed that Freundlich isotherm is the best model to describe the adsorption of MG onto the DS particles which has a heterogeneous surface. It was found that the adsorption process follows a pseudo-second-order kinetic model which revealed that the intra-particle diffusion stage is the rate-controlling stage for the process. The thermodynamic parameters ΔG, ΔS, and ΔH suggest the possibility of chemisorption and physisorption simultaneously and indicate the exothermic and spontaneous characters of the adsorption of MG dye on DS with negative values of ΔH and ΔG.

Synthesis of Kaolin-Supported Nickel Oxide Composites for the Catalytic Oxidative Degradation of Methylene Blue Dye

Organic dye contamination of water is a contributing factor to environmental pollution and has a negative impact on aquatic ecology. In this study, unsupported NiO and kaolin-supported NiO composites were synthesized by a one-step wet impregnation-precipitation method through the precipitation of nickel hydroxide onto locally accessible, inexpensive, and easily treated kaolin surfaces by using sodium hydroxide as a precipitating agent. The product was calcined at 500 °C and used for the catalytic oxidative degradation of methylene blue (MB) dye in an aqueous solution. The morphology, structure, and interactions of the synthesized materials were explored by SEM, XRD, and FT-IR spectroscopy. The characterization results revealed the fabrication and the growth of NiO on the kaolin surface. To determine the catalytic oxidative degradation performance of the catalyst, many experiments have been performed using the MB dye as a model dye. The catalytic degradation tests confirmed the importance of NiO and the high catalytic activity of the synthesized NiO/kaolin composite toward MB dye degradation. The oxidative degradation results showed that the optimized precursor amount on the kaolin surface could efficiently enhance the removal of MB dye. The kinetic investigation of the catalytic degradation of MB dye fitted the pseudo-first-order kinetic model. High removal efficiency was observed after eight reuse cycles, proving the exceptional stability and reusability of the composite. The catalytic process also proceeded with a low activation energy of 30.5 kJ/mol. In conclusion, the kaolin-supported NiO composite was established to be a favorable catalyst to degrade a model dye (MB) from an aqueous solution in the presence of inexpensive and easily available NaOCl with a catalytic efficiency of the material higher than 99% of the 20.3 mg catalyst within 6 min with an apparent rate constant, kapp, higher than 0.44625 min-1, which is far better than that of the unsupported catalyst with a kapp of 0.0926 min-1 at 10 mg dose in 20 min.

Sustainable and Green Synthesis of Iron Nanoparticles Supported on Natural Clays via Palm Waste Extract for Catalytic Oxidation of Crocein Orange G Mono Azoic Dye

In this study, the removal of Crocein Orange G dye (COG) from aqueous solution was investigated using an innovative green catalyst to overcome problems with chemical techniques. Clay bentonite El Hamma (HB)-supported nanoscale zero-valent iron (NZVI) was used as a heterogeneous Fenton-like catalyst for the oxidation of harmful COG. Palm waste extract was herein used as a reducing and capping agent to synthesize NZVI, and HB clay was employed, which was obtained from the El Hamma bentonite deposit in the Gabes province of Tunisia. HB and HB-NZVI were characterized by various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer, Emmett, and Teller (BET), Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), X-ray diffraction (XRD), and zeta potential. Under optimal conditions, total degradation of COG was attained within 180 min. Kinetic studies showed that the dye degradation rate followed well the pseudo-second-order model. The apparent activation energy was 33.11 kJ/mol, which is typical of a physically controlled reaction. The degradation pathways and mineralization study revealed that the adsorption-Fenton-like reaction was the principal mechanism that demonstrated 100% degradation efficiency of COG even after three successive runs. Obtained results suggest that HB-NZVI is an affective heterogeneous catalyst for the degradation of COG by H2O2 and may constitute a sustainable green catalyst for azoic dye removal from industrial wastewaters.

Uptake of BF Dye from the Aqueous Phase by CaO-g-C3N4 Nanosorbent: Construction, Descriptions, and Recyclability

Removing organic dyes from contaminated wastewater resulting from industrial effluents with a cost-effective approach addresses a major global challenge. The adsorption technique onto carbon-based materials and metal oxide is one of the most effective dye removal procedures. The current work aimed to evaluate the application of calcium oxide-doped carbon nitride nanostructures (CaO-g-C3N4) to eliminate basic fuchsine dyes (BF) from wastewater. CaO-g-C3N4 nanosorbent were obtained via ultrasonication and characterized by scanning electron microscopy, X-ray diffraction, TEM, and BET. The TEM analysis reveals 2D nanosheet-like nanoparticle architectures with a high specific surface area (37.31 m2/g) for the as-fabricated CaO-g-C3N4 nanosorbent. The adsorption results demonstrated that the variation of the dye concentration impacted the elimination of BF by CaO-C3N4 while no effect of pH on the removal of BF was observed. Freundlich isotherm and Pseudo-First-order adsorption kinetics models best fitted BF adsorption onto CaO-g-C3N4. The highest adsorption capacity of CaO-g-C3N4 for BF was determined to be 813 mg. g−1. The adsorption mechanism of BF is related to the π-π stacking bridging and hydrogen bond, as demonstrated by the FTIR study. CaO-g-C3N4 nanostructures may be easily recovered from solution and were effectively employed for BF elimination in at least four continuous cycles. The fabricated CaO-g-C3N4 adsorbent display excellent BF adsorption capacity and can be used as a potential sorbent in wastewater purification.