Mechanism and Performance Analysis of Nanoparticle-Polymer Fluid for Enhanced Oil Recovery: A Review

Effect of Anionic Surfactants on the Oil-Water-Rock Interactions by an Improved Washburn Method

The complex and variable structure of subsurface oil reservoirs as well as the small pore throat size of reservoirs make it extremely important to investigate the effect of oil-water-rock interactions for enhancing oil recovery. In this paper, the powder wettability of oil sand with different polar solvents was investigated using the improved Washburn capillary rise method, and the surface free energy of oil sand was calculated in combination with the OWRK method. In addition, the wettability of anionic surfactants HABS and PS solutions on the surface of oil sand was determined, and it showed that their wetting rates showed different trends after CMC (critical micelle concentration). The C×cosθ value of HABS decreased significantly with increasing concentration, whereas PS showed little changes. This may be related to the aggregate structure formed by HABS on the oil sand surface. Meanwhile, the interfacial free energy between crude oil and oil sand was obtained by crude oil-to-oil sand wetting experiments, and found that the wetting rate of crude oil to oil sand was much lower than that of solvents and surfactants. In combination with the above results and the oil-water interfacial tension (IFT), the oil-water-rock three-phase contact angle and the work of adhesion between the crude oil and the solid were obtained by Young's equation. From the three-phase contact angle results, it can be found that the contact angle values of both HABS and PS are obviously higher than that of the simulated water, and both HABS and PS have the ability to significantly reduce the work of adhesion, which shows a strong ability to strip the oil film on the surface of the solid. The research results of this paper are helpful to understand the oil displacement mechanism of chemical flooding in reservoir pores, which is of great significance for improving oil recovery.

Evaluating Factors Impacting Polymer Flooding in Hydrocarbon Reservoirs: Laboratory and Field-Scale Applications

Polymer flooding is an enhanced oil recovery (EOR) method used to increase oil recovery from oil reservoirs beyond primary and secondary recovery. Although it is one of the most well-established methods of EOR, there are still continuous new developments and evaluations for this method. This is mainly attributed to the diverse polymers used, expansion of this method in terms of application, and the increase in knowledge pertaining to the topic due to the increase in laboratory testing and field applications. In this research, we perform a review of the factors impacting polymer flooding in both laboratory studies and field-based applications in order to create guidelines with respect to the parameters that should be included when designing a polymer flooding study or application. The main mechanism of polymer flooding is initially discussed, along with the types of polymers that can be used in polymer flooding. We then discuss the most prominent parameters that should be included when designing a polymer flooding project and, based on previous laboratory studies and field projects, discuss how these parameters impact the polymer itself and the flooding process. This research can provide guidelines for researchers and engineers for future polymer flooding research or field applications.

Recent Advances in Applications of Oxidases and Peroxidases Polymer-Based Enzyme Biocatalysts in Sensing and Wastewater Treatment: A Review

Oxidase and peroxidase enzymes have attracted attention in various biotechnological industries due to their ease of synthesis, wide range of applications, and operation under mild conditions. Their applicability, however, is limited by their poor stability in harsher conditions and their non-reusability. As a result, several approaches such as enzyme engineering, medium engineering, and enzyme immobilization have been used to improve the enzyme properties. Several materials have been used as supports for these enzymes to increase their stability and reusability. This review focusses on the immobilization of oxidase and peroxidase enzymes on metal and metal oxide nanoparticle-polymer composite supports and the different methods used to achieve the immobilization. The application of the enzyme-metal/metal oxide-polymer biocatalysts in biosensing of hydrogen peroxide, glucose, pesticides, and herbicides as well as blood components such as cholesterol, urea, dopamine, and xanthine have been extensively reviewed. The application of the biocatalysts in wastewater treatment through degradation of dyes, pesticides, and other organic compounds has also been discussed.

Research Progress on Displacement Mechanism of Supercritical CO2 in Low-Permeability Heavy Oil Reservoir and Improvement Mechanism of Displacement Agents

With the continuous growth of global energy demand and the late stage of conventional oilfield exploitation, the demand for developing and utilizing low-permeability heavy oil reservoirs is becoming increasingly urgent. However, the exploitation of low-permeability heavy oil reservoirs faces many challenges due to their high viscosity, low permeability, and complex geological conditions. To overcome these challenges, researchers have gradually introduced SC-CO2 as an oil displacement agent in the exploitation of heavy oil reservoirs. However, the oil displacement mechanism of SC-CO2 in low-permeability heavy oil reservoirs and its improvement mechanism are still not completely understood. The article provides a detailed study and understanding of the oil displacement mechanism of SC-CO2, which involves the expansion of heavy oil volume through SC-CO2 dissolution. This mechanism reduces the capillary resistance and flow resistance during the oil flow process. The permeation of CO2 disrupts the internal structure and arrangement of heavy oil, reducing its viscosity. CO2 extracts both light and heavy components from the heavy oil, reducing the residual oil saturation. In addition, the mechanism of improving the effect of oil displacement agents such as nanoparticles, polymers, and surfactants on SC-CO2 displacement was also explored. By further exploring the mechanisms and improvement mechanisms of SC-CO2 displacement for heavy oil, it can guide the selection and optimization of oil displacement agents. Furthermore, understanding the mechanism can also provide a theoretical basis for engineering practice and technical innovation. While the research on CO2 flooding is analyzed and evaluated, the obstacles and challenges that still exist at this stage are indicated, and future research work on CO2 in low-permeability heavy oil reservoirs is proposed.

Preparation and Performance Study of Microemulsion Acid for Comprehensive Plugging Removal in Carbonate Reservoir

Matrix acidification is one of the most effective stimulations to dissolve scales and remove damage in carbonate reservoirs. However, existing acid systems are difficult to dissolve organic and inorganic scales simultaneously, and complex multi-stage alternative injection often introduces new precipitation and damages the reservoir. Here, based on the retardation ability of emulsified acid and the stable structure of microemulsion, an oil-phase solvent was preferably selected, and the surfactant and cosurfactant were optimized to prepare an acid-in-oil type microemulsion acid capable of dissolving both organic and inorganic scales and high solubilizing for hydrochloric acid. Based on the rotating disc experiment, scale dissolution experiment and acid driving experiment, the acid-rock reaction kinetics, scale dissolution ability and acidizing and plugging removal performance of microemulsion acid in a carbonate reservoir were systematically studied and compared. The results show that Solvesso 150 (aromatic solvent) has the advantages of low toxicity, high flash point and high-scale dissolving ability. At NP-4: OP-10: A (cosurfactant) = 3:3:4, the microemulsion acid system has the strongest ability to solubilize hydrochloric acid and can solve the problem of low H⁺ concentration. The particle size of microemulsion acid is smaller compared to emulsified acid. At 60 °C, the mass transfer coefficient of microemulsion acid is 3.2 × 10^-8 cm²/s, which is one order of magnitude less than that of emulsified acid. Microemulsion acid shows good solubility performance in dissolving organic and inorganic scales, and the comprehensive solubility of mixed scales can reach 98.28%. The stronger scale solubilization ability and lower acid-rock reaction rate enable microemulsion acid to form a thin and straight main wormhole, thus enhancing the acidizing and plugging removal effect. This study can solve the problem of poor hydrochloric acid solubilization ability of microemulsion acid to a certain extent, which provides theoretical and data support for the research and development of microemulsion acid and the efficient plugging removal technology for carbonate reservoirs.