Characterization of Competitive ELISA and Formulated Alhydrogel Competitive ELISA (FAcE) for Direct Quantification of Active Ingredients in GMMA-Based Vaccines

A next-generation GMMA-based vaccine candidate to fight shigellosis

Shigellosis is a leading cause of diarrheal disease in low-middle-income countries (LMICs). Effective vaccines will help to reduce the disease burden, exacerbated by increasing antibiotic resistance, in the most susceptible population represented by young children. A challenge for a broadly protective vaccine against shigellosis is to cover the most epidemiologically relevant serotypes among >50 Shigella serotypes circulating worldwide. The GMMA platform has been proposed as an innovative delivery system for Shigella O-antigens, and we have developed a 4-component vaccine against S. sonnei, S. flexneri 1b, 2a and 3a identified among the most prevalent Shigella serotypes in LMICs. Driven by the immunogenicity results obtained in clinic with a first-generation mono-component vaccine, a new S. sonnei GMMA construct was generated and combined with three S. flexneri GMMA in a 4-component Alhydrogel formulation (altSonflex1-2-3). This formulation was highly immunogenic, with no evidence of negative antigenic interference in mice and rabbits. The vaccine induced bactericidal antibodies also against heterologous Shigella strains carrying O-antigens different from those included in the vaccine. The Monocyte Activation Test used to evaluate the potential reactogenicity of the vaccine formulation revealed no differences compared to the S. sonnei mono-component vaccine, shown to be safe in several clinical trials in adults. A GLP toxicology study in rabbits confirmed that the vaccine was well tolerated. The preclinical study results support the clinical evaluation of altSonflex1-2-3 in healthy populations, and a phase 1-2 clinical trial is currently ongoing.

From an in vivo to an in vitro relative potency (IVRP) assay to fully characterize a multicomponent O-antigen based vaccine against Shigella

Outer membrane vesicles (OMV) represent an innovative platform for the design of polysaccharide based vaccines. Generalized Modules for Membrane Antigens (GMMA), OMV released from engineered Gram-negative bacteria, have been proposed for the delivery of the O-Antigen, key target for protective immunity against several pathogens including Shigella. altSonflex1-2-3 is a GMMA based vaccine, including S. sonnei and S. flexneri 1b, 2a and 3a O-Antigens, with the aim to elicit broad protection against the most prevalent Shigella serotypes, especially affecting children in low-middle income countries. Here we developed an In Vitro Relative Potency assay, based on recognition of O-Antigen by functional monoclonal antibodies selected to bind the key epitopes of the different O-Antigen active ingredients, directly applied to our Alhydrogel-formulated vaccine. Heat-stressed altSonflex1-2-3 formulations were generated and extensively characterized. The impact of detected biochemical changes in in vivo and in vitro potency assays was assessed. The overall results showed how the in vitro assay can replace the use of animals, overcoming the inherently high variability of in vivo potency studies. The entire panel of physico-chemical methods developed will contribute to detect suboptimal batches and will be valuable to perform stability studies. The work on Shigella vaccine candidate can be easily extended to other O-Antigen based vaccines.

Evolution of Vaccines Formulation to Tackle the Challenge of Anti-Microbial Resistant Pathogens

The increasing diffusion of antimicrobial resistance (AMR) across more and more bacterial species emphasizes the urgency of identifying innovative treatment strategies to counter its diffusion. Pathogen infection prevention is among the most effective strategies to prevent the spread of both disease and AMR. Since their discovery, vaccines have been the strongest prophylactic weapon against infectious diseases, with a multitude of different antigen types and formulative strategies developed over more than a century to protect populations from different pathogens. In this review, we review the main characteristics of vaccine formulations in use and under development against AMR pathogens, focusing on the importance of administering multiple antigens where possible, and the challenges associated with their development and production. The most relevant antigen classes and adjuvant systems are described, highlighting their mechanisms of action and presenting examples of their use in clinical trials against AMR. We also present an overview of the analytical and formulative strategies for multivalent vaccines, in which we discuss the complexities associated with mixing multiple components in a single formulation. This review emphasizes the importance of combining existing knowledge with advanced technologies within a Quality by Design development framework to efficiently develop vaccines against AMR pathogens.

Multiplex Surface-Enhanced Raman Scattering: An Emerging Tool for Multicomponent Detection of Food Contaminants

For survival and quality of human life, the search for better ways to ensure food safety is constant. However, food contaminants still threaten human health throughout the food chain. In particular, food systems are often polluted with multiple contaminants simultaneously, which can cause synergistic effects and greatly increase food toxicity. Therefore, the establishment of multiple food contaminant detection methods is significant in food safety control. The surface-enhanced Raman scattering (SERS) technique has emerged as a potent candidate for the detection of multicomponents simultaneously. The current review focuses on the SERS-based strategies in multicomponent detection, including the combination of chromatography methods, chemometrics, and microfluidic engineering with the SERS technique. Furthermore, recent applications of SERS in the detection of multiple foodborne bacteria, pesticides, veterinary drugs, food adulterants, mycotoxins and polycyclic aromatic hydrocarbons are summarized. Finally, challenges and future prospects for the SERS-based detection of multiple food contaminants are discussed to provide research orientation for further.

Analytical and Preformulation Characterization Studies of Human Papillomavirus Virus-Like Particles to Enable Quadrivalent Multi-Dose Vaccine Formulation Development

Introducing multi-dose formulations of Human Papillomavirus (HPV) vaccines will reduce costs and enable improved global vaccine coverage, especially in low- and middle-income countries. This work describes the development of key analytical methods later utilized for HPV vaccine multi-dose formulation development. First, down-selection of physicochemical methods suitable for multi-dose formulation development of four HPV (6, 11, 16, and 18) Virus-Like Particles (VLPs) adsorbed to an aluminum adjuvant (Alhydrogel®, AH) was performed. The four monovalent AH-adsorbed HPV VLPs were then characterized using these down-selected methods. Second, stability-indicating competitive ELISA assays were developed using HPV serotype-specific neutralizing mAbs, to monitor relative antibody binding profiles of the four AH-adsorbed VLPs during storage. Third, concentration-dependent preservative-induced destabilization of HPV16 VLPs was demonstrated by addition of eight preservatives found in parenterally administered pharmaceuticals and vaccines, as measured by ELISA, dynamic light scattering, and differential scanning calorimetry. Finally, preservative stability and effectiveness in the presence of vaccine components were evaluated using a combination of RP-UHPLC, a microbial growth inhibition assay, and a modified version of the European Pharmacopoeia assay (Ph. Eur. 5.1.3). Results are discussed in terms of analytical challenges encountered to identify and develop high-throughput methods that facilitate multi-dose formulation development of aluminum-adjuvanted protein-based vaccine candidates.

VaxArray immunoassay for the multiplexed quantification of poliovirus D-antigen

Next generation poliovirus vaccines are critical to reaching global poliovirus eradication goals. Recent efforts have focused on creating inactivated vaccines using attenuated Sabin strains that maintain patient safety benefits and immunogenicity of conventional inactivated vaccines while increasing manufacturing safety and lowering production costs, and on developing novel oral vaccines using modified Sabin strains that provide critical mucosal immunity but are further attenuated to minimize risk of reversion to neurovirulence. In addition, there is a push to improve the analytical tools for poliovirus vaccine characterization. Conventional and Sabin inactivated poliovirus vaccines typically rely on standard plate-based ELISA as in vitro D-antigen potency assays in combination with WHO international standards as calibrants. While widely utilized, the current D-antigen ELISA assays have a long time to result (up to 72 h), can suffer from lab-to-lab inconsistency due to non-standardized protocols and reagents, and are inherently singleplex. For D-antigen quantitation, we have developed the VaxArray Polio Assay Kit, a multiplexed, microarray-based immunoassay that uses poliovirus-specific human monoclonal antibodies currently under consideration as standardized reagents for characterizing inactivated Sabin and Salk vaccines. The VaxArray assay can simultaneously quantify all 3 poliovirus serotypes with a time to result of less than 3 h. Here we demonstrate that the assay has limits of quantification suitable for both bioprocess samples and final vaccines, excellent reproducibility and precision, and improved accuracy over an analogous plate-based ELISA. The assay is suitable for adjuvanted combination vaccines, as common vaccine additives and crude matrices do not interfere with quantification, and is intended as a high throughput, standardized quantitation tool to aid inactivated poliovirus vaccine manufacturers in streamlining vaccine development and manufacturing, aiding the global polio eradication effort.

•

Multiplexed D-antigen immunoassay for all 3 poliovirus serotypes

•

Has <3 h time to result and compares well to 3-day plate-based ELISA

•

Assay shows high specificity and is reactive to sIPV, cIPV, and OPV

•

Applicable to in-process samples, final IPV and combination vaccine formulations

•

High accuracy and precision for both sIPV and cIPV over multiple users and days

Methods for Assessment of OMV/GMMA Quality and Stability

Outer membrane vesicles (OMV) represent a promising platform for the development of vaccines against bacterial pathogens. More recently, bacteria have been genetically modified to increase OMV yield and modulate the design of resulting particles, also named generalized modules for membrane antigens (GMMA). OMV/GMMA resemble the bacterial surface of the pathogen, where key antigens to elicit a protective immune response are and contain pathogen-associated molecular patterns (e.g., lipopolysaccharides, lipoproteins) conferring self-adjuvanticity. On the other hand, OMV/GMMA are quite complex molecules and a comprehensive panel of analytical methods is needed to ensure quality, consistency of manufacture and to follow their stability over time. Here, we describe several procedures that can be used for OMV/GMMA characterization as particles and for analysis of key antigens displayed on their surface.

Novel Simple Conjugation Chemistries for Decoration of GMMA with Heterologous Antigens

Outer Membrane Vesicles (OMV) constitute a promising platform for the development of efficient vaccines. OMV can be decorated with heterologous antigens (proteins or polysaccharides), becoming attractive novel carriers for the development of multicomponent vaccines. Chemical conjugation represents a tool for linking antigens, also from phylogenetically distant pathogens, to OMV. Here we develop two simple and widely applicable conjugation chemistries targeting proteins or lipopolysaccharides on the surface of Generalized Modules for Membrane Antigens (GMMA), OMV spontaneously released from Gram-negative bacteria mutated to increase vesicle yield and reduce potential reactogenicity. A Design of Experiment approach was used to identify optimal conditions for GMMA activation before conjugation, resulting in consistent processes and ensuring conjugation efficiency. Conjugates produced by both chemistries induced strong humoral response against the heterologous antigen and GMMA. Additionally, the use of the two orthogonal chemistries allowed to control the linkage of two different antigens on the same GMMA particle. This work supports the further advancement of this novel platform with great potential for the design of effective vaccines.

Neisseria meningitidis Factor H Binding Protein Surface Exposure on Salmonella Typhimurium GMMA Is Critical to Induce an Effective Immune Response against Both Diseases

GMMA, outer membrane vesicles resulting from hyperblebbing mutated bacterial strains, are a versatile vaccine platform for displaying both homologous and heterologous antigens. Periplasmic expression is a popular technique for protein expression in the lumen of the blebs. However, the ability of internalized antigens to induce antibody responses has not been extensively investigated. Herein, the Neisseria meningitidis factor H binding protein (fHbp) was heterologously expressed in the lumen of O-antigen positive (OAg+) and O-antigen negative (OAg−) Salmonella Typhimurium GMMA. Only the OAg− GMMA induced an anti-fHbp IgG response in mice if formulated on Alum, although it was weak and much lower compared to the recombinant fHbp. The OAg− GMMA on Alum showed partial instability, with possible exposure of fHbp to the immune system. When we chemically conjugated fHbp to the surface of both OAg+ and OAg− GMMA, these constructs induced a stronger functional response compared to the fHbp immunization alone. Moreover, the OAg+ GMMA construct elicited a strong response against both the target antigens (fHbp and OAg), with no immune interference observed. This result suggests that antigen localization on GMMA surface can play a critical role in the induction of an effective immune response and can encourage the development of GMMA based vaccines delivering key protective antigens on their surface.

Quantification of trivalent non-replicating rotavirus vaccine antigens in the presence of aluminum adjuvant

Parenterally administered rotavirus vaccines may overcome the low efficacy observed in resource-poor regions that use live oral formulations. We have reported work on a trivalent nonreplicating rotavirus vaccine (NRRV) for parenteral administration consisting of the recombinant tetanus toxoid P2 CD4 epitope fused to a truncated VP8* fragment (P2-VP8*) for the P[4], P[6], and P[8] serotypes of rotavirus adjuvanted with aluminum. An essential part of developing this vaccine candidate was devising quantification methods for each antigen in the trivalent NRRV in the presence of aluminum adjuvant. This report describes the development of quantitative inhibition enzyme-linked immunosorbent assays (ELISAs) for in vitro antigenicity determination of the adjuvanted trivalent NRRV using serotype-specific monoclonal antibodies (mAbs) against each of the P2-VP8* antigens. Adjuvanted trivalent vaccine samples are titrated and incubated with a constant concentration of specific mAbs against each NRRV P2-VP8* antigen variant. Unbound mAbs are measured by ELISA to indirectly quantify the amount of each antigen present in the trivalent vaccine. Sensitive, specific, and reproducible inhibition ELISAs were developed and qualified for each antigen and used for final product quantification and release testing without desorption of the vaccine antigen.

Stability of Outer Membrane Vesicles-Based Vaccines, Identifying the Most Appropriate Methods to Detect Changes in Vaccine Potency

Ensuring the stability of vaccines is crucial to successfully performing global immunization programs. Outer Membrane Vesicles (OMV) are receiving great attention as vaccine platforms. OMV are complex molecules and few data have been collected so far on their stability. OMV produced by bacteria, genetically modified to increase their spontaneous release, simplifying their production, are also known as Generalized Modules for Membrane Antigens (GMMA). We have performed accelerated stability studies on GMMA from different pathogens and verified the ability of physico-chemical and immunological methods to detect possible changes. High-temperature conditions (100 °C for 40 min) did not affect GMMA stability and immunogenicity in mice, in contrast to the effect of milder temperatures for a longer period of time (37 °C or 50 °C for 4 weeks). We identified critical quality attributes to monitor during stability assessment that could impact vaccine efficacy. In particular, specific recognition of antigens by monoclonal antibodies through competitive ELISA assays may replace in vivo tests for the potency assessment of GMMA-based vaccines.