Electrochemical Performance of Photovoltaic Cells using HDA Capped-SnS Nanocrystal from bis (N-1,4-Phenyl-N-Morpho-Dithiocarbamato) Sn(II) Complexes

Improving the Conversion Ratio of QDSCs via the Passivation Effects of NiS

To revolutionize the photochemical efficiency of quantum dots sensitized solar cells (QDSSCs) devices, herein, a passivation of the cells with multilayer material has been developed for heterojunctions TiO2/NiS/MnS/HI-30/Pt devices. In this study, NiS and MnS were deposited on a photoanode for the first time as passivated photon absorbers at room temperature. The adoption of NiS as a passisvative layer could tailor the active surface area and improve the photochemical properties of the newly modified cells. The vibrational shifts obtained from the Raman spectra imply that the energy change is influenced by the surface effect, giving rise to better electronic conductivity. The electrochemical stability and durability test for the N/M-3 device slows down and remains at 8.88% of its initial current after 3500 s, as compared to the N/M-1 device at 7.20%. The disparity in charge recombination implies that both the outer and inner parts of the nanoporous material are involved in the photogeneration reaction. The hybridized N/M-3 cell device reveals the highest current density with a low potential onset, indicating that power conversion occurs more easily because photons tend to be adsorbed easily on the surface of the MnS. The Nyquist plot for N/M-1 and N/M-3 promotes the faster transport of electrolytic ions across the TiO2/NiS/MnS, providing a good interaction for the electrolyte. The I-J Value of 9.94% shows that the passivation with the NiS layer promotes electron transport and enhances the performance of the modified cells. The passivation of the TiO2 layer with NiS attains a better power conversion efficiency among the scant studies so far on the surface passivation of QDSCs.

FeS/FeS2 nanoscale structures synthesized in one step from Fe(ll) dithiocarbamate complexes as a single source precursor

Nanoscale FeS and FeS2 mixed phases were synthesized by one-pot decomposition of (N-anil-N-piperldtc)Fe1 as FeS#1), (N-piperldtc)Fe2 as FeS#2) and (N-anildtc)Fe3 as FeS#3) complexes as precursors, with the help of tri-n-octylphosphine oxide (TOPO) coordinating solvent. Their morphology, stability, size, optical and structural characteristics were observed using various material characterization instruments. In comparison to the FeS#2 nano-flower shape, FeS#1 and FeS#3 have a uniform nano-rod shape. A one-step decomposition pattern was obtained from the thermal gravimetric analysis (TGA) results with 3% final mass residual. The high-resolution transmission electron microscopy (HRTEM) image reveals an aggregation and size diameter of around 14.47–30.25 nm for the three samples. The optical response between 3.8 and 4.2 eV from the three samples shows that they are inconsiderable materials for solar cells application. The diffraction peaks for the three samples matched well with the FeS/FeS2. These nanoscale materials can be used in a variety of applications, including lithium-ion batteries, biosensors, hydrogen evolution, and multifunctional nanocomposite materials.

Colloidal Synthesis and Characterization of Molybdenum Chalcogenide Quantum Dots Using a Two-Source Precursor Pathway for Photovoltaic Applications

The drawbacks of utilizing nonrenewable energy have quickened innovative work on practical sustainable power sources (photovoltaics) because of their provision of a better-preserved decent environment which is free from natural contamination and commotion. Herein, the synthesis, characterization, and application of Mo chalcogenide nanoparticles (NP) as alternative sources in the absorber layer of QDSSCs is discussed. The successful synthesis of the NP was confirmed as the results from the diffractive peaks obtained from XRD which were positive and agreed in comparison with the standard. The diffractive peaks were shown in the planes (100), (002), (100), and (105) for the MoS₂ nanoparticles; (002), (100), (103), and (110) for the MoSe₂ nanoparticles; and (0002), (0004), (103), as well as (0006) for the MoTe₂ nanoparticles. MoSe₂ presented the smallest size of the nanoparticles, followed by MoTe₂ and, lastly, by MoS₂. These results agreed with the results obtained using SEM analysis. For the optical properties of the nanoparticles, UV-Vis and PL were used. The shift of the peaks from the red shift (600 nm) to the blue shift (270-275 nm and 287-289 nm (UV-Vis)) confirmed that the nanoparticles were quantum-confined. The application of the MoX₂ NPs in QDSSCs was performed, with MoSe₂ presenting the greatest PCE of 7.86%, followed by MoTe₂ (6.93%) and, lastly, by MoS₂, with the PCE of 6.05%.

Electrochemistry of Inorganic OCT-PbS/HDA and OCT-PbS Photosensitizers Thermalized from Bis(N-diisopropyl-N-octyldithiocarbamato) Pb(II) Molecular Precursors

Inorganic nanocrystal solar cells have been tagged as the next generation of synthesizers that have the potential to break new ground in photovoltaic cells. This synthetic route offers a safe, easy and cost-effective method of achieving the desired material. The present work investigates the synthesis of inorganic PbS sensitizers through a molecular precursor route and their impact on improving the conversion efficiency in photovoltaic cells. PbS photosensitizers were deposited on TiO2 by direct deposition, and their structure, morphologies and electrocatalytic properties were examined. The X-ray diffraction (XRD) confirms PbS nanocrystal structure and the atomic force microscopy (AFM) displays the crystalline phase of uniform size and distribution of PbS, indicating compact surface nanoparticles. The electrocatalytic activity by lead sulfide, using N-di-isopropyl-N-octyldithiocarbamato (OCT) without hexadecylamine (HDA) capping (OCT-PbS) was very low in HI-30 electrolyte, due to its overpotential, while lead sulfide with OCT and HDA-capped (OCT-PbS/HDA) sensitizer exhibited significant electrocatalytic activity with moderate current peaks due to a considerable amount of reversibility. The OCT-PbS sensitizer exhibited a strong resistance interaction with the electrolyte, indicating very poor catalytic activity compared to the OCT-PbS/HDA sensitizer. The values of the open-circuit voltage (VOC) were ~0.52 V, with a fill factor of 0.33 for OCT-PbS/HDA. The better conversion efficiency displayed by OCT-PbS/HDA is due to its nanoporous nature which improves the device performance and stability.