Carbon Dots for Intracellular pH Sensing with Fluorescence Lifetime Imaging Microscopy

A fluorescence-enhanced method specific for furfural determination in Chinese Baijiu based on luminescent carbon dots and direct surface reaction

Detecting the furfural concentration in Baijiu can be used to assess the quality of Baijiu, allowing for the optimization of processing techniques and the enhancement of overall quality. In this paper, a fluorescence-enhanced method based on carbon dots (o-CDs) is developed for the furfural determination in Chinese Baijiu. In an environment full-filled with ·SO4- and ·OH, furfural undergone a direct surface reaction with the ortho-diamino groups at o-CDs. The created furan-based imidazole increased the surface electron density, leading an emission enhancement and color changes from orange to green. Thereby, a linear fluorescence response of o-CDs-TA to furfural is established in water with a detection limit of 30.5 nM. Finally, after ethanol correction it is used to determine furfural in Chinese Baijiu with high precision and reproducibility, providing a new strategy with low-cost and high sensitivity. In particular, the idea of covalently connecting target molecule to the CDs surface via the assistance of free radical opens a new avenue to merge the nanoscale and molecular realms through implementing chemical role into carbon nanostructures.

Automatic segmentation of lysosomes and analysis of intracellular pH with Radachlorin photosensitizer and FLIM

We report application of the fluorescence lifetime imaging microscopy (FLIM) for analysis of distributions of intracellular acidity using a chlorin-e6 based photosensitizer Radachlorin. An almost two-fold increase of the photosensitizer fluorescence lifetime in alkaline microenvironments as compared to acidic ones allowed for clear distinguishing between acidic and alkaline intracellular structures. Clusterization of a phasor plot calculated from fits of the FLIM raw data by two Gaussian distributions provided accurate automatic segmentation of lysosomes featuring acidic contents. The approach was validated in colocalization experiments with LysoTracker fluorescence in living cells of four established lines. The dependence of photosensitizer fluorescence lifetime on microenvironment acidity allowed for estimation of pH inside the cells, except for the nuclei, where photosensitizer does not penetrate. The developed method is promising for combined application of the photosensitizer for both photodynamic treatment and diagnostics.

Carbon dots@noble metal nanoparticle composites: research progress report

Carbon dots@noble metal nanoparticle composites are formed by combining carbon dots and metal nanoparticles using various strategies. Carbon dots exhibit a reducing ability and function as stabilisers; consequently, metal-ion solutions can be directly reduced by them to synthesise gold, silver, and gold-silver alloy particles. Carbon dots@gold/silver/gold-silver particle composites have demonstrated the potential for several practical applications owing to their superior properties and simple preparation process. Until now, several review articles have been published to summarise fluorescent carbon dots or noble metal nanomaterials. Compared with metal-free carbon dots, carbon dots@noble metal nanoparticles have a unique morphology and structure, resulting in new physicochemical properties, which allow for sensing, bioimaging, and bacteriostasis applications. Therefore, to promote the effective development of carbon dots@noble metal nanoparticle composites, this paper primarily reviews carbon dots@gold/silver/gold-silver alloy nanoparticle composites for the first time in terms of the following aspects. (1) The synthesis strategies of carbon dots@noble metal nanoparticle composites are outlined. The principle and function of carbon dots in the synthesis strategies are examined. The advantages and disadvantages of these methods and composites are analysed. (2) The characteristics and properties of such composites are described. (3) The applications of these composite materials are summarised. Finally, the potentials and limitations of carbon dots@noble metal nanoparticle composites are discussed, thus laying the foundation for their further development.

Probing Polarity and pH Sensitivity of Carbon Dots in Escherichia coli through Time-Resolved Fluorescence Analyses

Intracellular monitoring of pH and polarity is crucial for understanding cellular processes and functions. This study employed pH- and polarity-sensitive nanomaterials such as carbon dots (CDs) for the intracellular sensing of pH, polarity, and viscosity using integrated time-resolved fluorescence anisotropy (FA) imaging (TR-FAIM) and fluorescence lifetime (FLT) imaging microscopy (FLIM), thereby enabling comprehensive characterization. The functional groups on the surface of CDs exhibit sensitivity to changes in the microenvironment, leading to variations in fluorescence intensity (FI) and FLT according to pH and polarity. The FLT of CDs in aqueous solution changed gradually from 6.38 ± 0.05 ns to 8.03 ± 0.21 ns within a pH range of 2-8. Interestingly, a complex relationship of FI and FLT was observed during measurements of CDs with decreasing polarity. However, the FA and rotational correlation time (θ) increased from 0.062 ± 0.019 to 0.112 ± 0.023 and from 0.49 ± 0.03 ns to 2.01 ± 0.27 ns, respectively. This increase in FA and θ was attributed to the higher viscosity accompanying the decrease in polarity. Furthermore, CDs were found to bind to three locations in Escherichia coli: the cell wall, inner membrane, and cytoplasm, enabling intracellular characterization using FI and FA decay imaging. FLT provided insights into cytoplasmic pH (7.67 ± 0.48), which agreed with previous works, as well as the decrease in polarity in the cell wall and inner membrane. The CD aggregation was suspected in certain areas based on FA, and the θ provided information on cytoplasmic heterogeneity due to the aggregation and/or interactions with biomolecules. The combined TR-FAIM/FLIM system allowed for simultaneous monitoring of pH and polarity changes through FLIM and viscosity variations through TR-FAIM.

Preparation and application of high-brightness red carbon quantum dots for pH and oxidized L-glutathione dual response

Carbon dots (CDs) with red fluorescence emission are highly desirable for use in bioimaging and trace- substance detection, with potential applications in biotherapy, photothermal therapy, and tumor visualization. Most CDs emit green or blue fluorescence, thus limiting their applicability. We report a novel fluorescent detection platform based on high-brightness red fluorescence emission carbon dots (R-CDs) co-doped with nitrogen and bromine, which exhibit pH and oxidized L-glutathione (GSSG) dual-responsive characteristics. The absolute quantum yield of the R-CDs was as high as 11.93%. We discovered that the R-CDs were able to detect acidic pH in live cells and zebrafish owing to protonation and deprotonation. In addition, GSSG was detected in vitro over a broad linear range (8-200 μM) using the R-CDs with excitation-independent emission. Furthermore, cell imaging and bioimaging experiments demonstrated that the R-CDs were highly cytocompatible and could be used as fluorescent probes to target lysosomes and nucleolus. These studies highlight the promising prospects of R-CDs as biosensing tools for bioimaging and trace-substance detection applications.

Organic acid-induced triple fluorescent emission carbon quantum dots identification of distilled liquor

An acid-sensitive carbon dot fluorescence sensing array was investigated for the differentiated recognition of distilled spirits. Due to the electrostatic interactions between CDs and organic acids, organic acids affect the protonation and fluorescence properties of CDs, which in turn modify the CDs triple fluorescence emission. The regular linear variation of the fluorescence sensor was found under acidic conditions (3.0 < pH < 6.2). A comprehensive study of acids with selectivity, different concentrations (0.1 mM, 1 mM, 10 mM, 40 mM), different types (8 species) and mixed acids (formic acid and acetic acid), and good quantification capability for acetic acid (0.01-1 mM). Demonstrating good recognition ability of the sensor array for complex analyte. On this basis, the fluorescence sensor array was applied to the classification and recognition of liquors. LDA has realized the identification of 16 kinds of Baijiu and 21 kinds of distilled liquors with an accuracy of 100%.

Fluorescent Carbon Dots from Food Industry By-Products for Cell Imaging

Herein, following a circular economy approach, we present the synthesis of luminescent carbon dots via the thermal treatment of chestnut and peanut shells, which are abundant carbon-rich food industry by-products. As-synthesized carbon dots have excellent water dispersibility thanks to their negative surface groups, good luminescence, and photo-stability. The excitation-emission behaviour as well as the surface functionalization of these carbon dots can be tuned by changing the carbon source (chestnuts or peanuts) and the dispersing medium (water or ammonium hydroxide solution). Preliminary in vitro biological data proved that the samples are not cytotoxic to fibroblasts and can act as luminescent probes for cellular imaging. In addition, these carbon dots have a pH-dependent luminescence and may, therefore, serve as cellular pH sensors. This work paves the way towards the development of more sustainable carbon dot production for biomedical applications.

Carbon dot-based nanomaterials: a promising future nano-platform for targeting tumor-associated macrophages

The tumor microenvironment (TME) is the internal environment that tumors depend on for survival and development. Tumor-associated macrophages (TAMs), as an important part of the tumor microenvironment, which plays a crucial role in the occurrence, development, invasion and metastasis of various malignant tumors and has immunosuppressant ability. With the development of immunotherapy, eradicating cancer cells by activating the innate immune system has yielded encouraging results, however only a minority of patients show a lasting response. Therefore, in vivo imaging of dynamic TAMs is crucial in patient-tailored immunotherapy to identify patients who will benefit from immunotherapy, monitor efficacy after treatment, and identify alternative strategies for non-responders. Meanwhile, developing nanomedicines based on TAMs-related antitumor mechanisms to effectively inhibit tumor growth is expected to become a promising research field. Carbon dots (CDs), as an emerging member of the carbon material family, exhibit unexpected superiority in fluorescence imaging/sensing, such as near infrared imaging, photostability, biocompatibility and low toxicity. Their characteristics naturally integrate therapy and diagnosis, and when CDs are combined with targeted chemical/genetic/photodynamic/photothermal therapeutic moieties, they are good candidates for targeting TAMs. We concentrate our discussion on the current learn of TAMs and describe recent examples of macrophage modulation based on carbon dot-associated nanoparticles, emphasizing the advantages of their multifunctional platform and their potential for TAMs theranostics.

The whole-cell kinetic metabolic model of the pH regulation mechanisms in human erythrocytes

Mathematical modeling in recent years helped to obtain answers to questions that were difficult or even impossible to answer experimentally, to predict several unexpected connections in cell metabolism and to understand and importance of certain biochemical reactions. Due to the complexity and variety of processes underlying the mechanisms of intracellular pH (pHi) regulation, mathematical modeling and metabolome analysis are powerful tools for their analysis. In this regard, a mathematical metabolic model for human erythrocytes was created, which combines cellular metabolism with acid-base processes and gas exchange. The model consists of the main metabolic pathways, such as glycolysis, the pentose phosphate pathway, some membrane transport systems, and interactions between hemoglobin and metabolites. The Jacobs-Stewart cycle, which is fundamental in gas exchange and pH regulation, was included to these pathways. The model was created in the COPASI environment, consisted of 85 reactions, the rate of which is based on accurate kinetic equations. The time dependences of reaction flows and metabolite concentrations, as an outcome of calculations, allowed us to reproduce the behaviour of the metabolic system after its disturbance in vitro and to establish the recovery mechanisms or approximation to stationary states. The COPASI simulation environment provides model flexibility by reproducing any experimental design by optimizing direct quantitative comparisons between measured and predicted results. Thus, the procedure of parameters optimization (Parameter Estimation) followed by the solution of the model’s differential equations (Time Course procedure) was used to predict the behaviour of all measured and unmeasured variables over time. The initial intracellular concentrations of CO2, HCO3– in human erythrocytes used for incubation in a phosphate buffer medium were calculated. Changes in CO2, HCO3– content over time were shown. It was established that the regulation of pH in erythrocytes placed in a buffer medium takes place with the participation of two types of processes – fast (takes place in 1.3 s) and slow. It is shown that fast processes are aimed at restoring the intracellular balance between CO2 and HCO3–, slow processes are aimed at establishing the balance of H+ between the cell and the extracellular environment. The role of carbonic anhydrase (CA) and hemoglobin in the processes of pH stabilization is shown and analyzed. The physiological role of the metabolon between band 3 protein (AE1), CA, aquaporin and hemoglobin in maintaining pH homeostasis in the conditions of in vitro experiments are discussed.

Development of a carbon dot and methylene blue NIR-emitting FLIM-FRET pair in niosomes for controlled ROS generation

Non-ionic surfactant vesicular systems (niosomes) are structurally similar to lipid vesicles, differing only in the bilayer composition. Herein we report a unique method to generate reactive oxygen species (ROS) utilizing a FLIM-FRET technique involving niosome-trapped yellow emissive carbon dots (YCDs) and methylene blue (MB) in aqueous medium under neutral conditions. Niosomes are biologically important because of their good stability and extremely low toxicity. Fluorescent CDs, emitting in the higher wavelengths on visible light excitation, are of incredible importance in bio-imaging and optoelectronics. Hence, we prepared nitrogen-containing YCDs from a single precursor, o-phenylenediamine, and explained their detailed photophysics upon incorporation into the niosomal bilayer. The YCDs are polarity sensitive, and are rotationally restricted in niosomes, which increases their fluorescence quantum yield from 29% (in water) to 91%. These YCDs are tactically employed to develop a near infrared (NIR) FRET pair with methylene blue (MB), which is a very well-known type-I and type-II photosensitizer. This FRET pair, which emits in the NIR region, is found to be an ideal system to generate ROS by excitation in the lower visible wavelengths. Interestingly, the ROS production by MB from the dissolved oxygen is enhanced inside the niosomes. The donor and the acceptor moieties in this unique NIR-emitting FRET pair display an unprecedented 300 nm Stokes shift. The findings could be influential in bio-imaging in the NIR region evading cellular autofluorescence and the controllably generated ROS can be further applied as a potential photodynamic therapeutic agent.

Ratiometric intracellular pH sensors based on nitrogen-doped graphene oxide quantum dots

Intracellular pH (pHi) is very essential for the function of cells and organisms. Thus, it is of great scientific and technical significance to develop nanosensors for probing pHi. In this work, nitrogen-doped graphene oxide quantum dots (N-GOQDs) with fluorescent efficiency of 54% are prepared. The fluorescent spectrum excited at 340 nm contains two remarkable bands at 430 and 520 nm. Interestingly, when pH value increases from 3.6 to 10.5, the blue band at 430 nm slightly changes, while the green band at 520 nm significantly quenches. The change of fluorescent intensities also can be reflected by the variation of fluorescent color. The dual-emissive N-GOQDs are developed as ratiometric fluorescent probes for pHi, which can avoid the influence of several deviations, such as probe concentration, optical path length, and detector efficiency. As a proof of concept, pHi of Hela cells is monitored successfully. This work demonstrates the construction of nano-biosensors based on N-GOQDs with bright fluorescence, high-stability, and good biocompatibility.

Enhancing the Electron Transport, Quantum Yield, and Catalytic Performance of Carbonized Polymer Dots via MnO Bridges

Carbonized polymer dots (CPDs) have received tremendous attention during the last decade due to their excellent fluorescent properties and catalytic performance. Doping CPDs with transition metal atoms accelerates the local electron flow in CPDs and improves the fluorescent properties and catalytic performance of the CPDs. However, the binding sites and the formation mechanisms of the transition-metal-atom-doped CPDs remain inconclusive. In this work, Mn²⁺ -ion-doped CPDs (Mn-CPDs) are synthesized by the hydrothermal method. The Mn²⁺ ions form MnO bonds that bridge the sp² domains of carbon cores and increases the effective sp² domains in the Mn-CPDs, which redshifts the fluorescence emission peak of the Mn-CPDs slightly. The Mn²⁺ ions form covalent bonds in the CPDs and remedy the oxygen vacancies of the CPDs, which cuts off the non-radiative-recombination process of the Mn-CPDs and increases the quantum yield of the Mn-CPDs to 70%. Furthermore, the MnO bonds accelerate the electron flow between adjacent sp² domains and enhances the electron transport in the Mn-CPDs. Thus, the Mn-CPDs demonstrate excellent catalytic performance to activate hydrogen peroxide (H₂ O₂ ) and produce hydroxyl radicals (•OH) to degrade methylene blue (MB) and rhodamine B (RhB).

Biocompatible Ni-doped CdSe/ZnS semiconductor nanocrystals for cellular imaging and sorting

Quantum dots with chemical composition QD CdSe / ZnS _ Ni 650 are successfully synthesized by the hydrothermal method using chemical precipitation. Nanocrystalline phase of nanostructures are isolated and characterized using XRD. The mean crystalline size was 9.0±2.0 nm with core/shell Ni-dopant of the Quantum dot diameter. The ferromagnetic data reveal the magnetic behavior of QD CdSe / ZnS _ Ni 650 . The optical absorption measurement of these QDs in the UV-vis range 200-800 nm band gap value of 2.11 eV for QD CdSe / ZnS _ Ni 650 . This means that pure QD CdSe 650 and QD CdSe / ZnS _ Ni 650 have a redshift of when compared to bulk CdSe. These QD CdSe / ZnS _ Ni 650 where successfully uptake by the cell lines include HELA and MCF-7 for bioimaging and sorting applications.

A Novel Quantum Dot-Based pH Probe for Long-Term Fluorescence Lifetime Imaging Microscopy Experiments in Living Cells

The use of two nanoparticles for quantitative pH measurements in live cells by means of fluorescence lifetime imaging microscopy (FLIM) is investigated here. These nanoparticles are based on CdSe/ZnS quantum dots (QDs), functionalized with N-acetylcysteine (CdSe/ZnS-A) and with a small peptide containing D-penicillamine and histidine (CdSe/ZnS-PH). CdSe/ZnS-A has tendency to aggregate and nonlinear pH sensitivity in a complex medium containing salts and macromolecules. On the contrary, CdSe/ZnS-PH shows chemical stability, low toxicity, efficient uptake in C3H10T1/2 cells, and good performance as an FLIM probe. CdSe/ZnS-PH also has key advantages over a recently reported probe based on a CdSe/ZnS QD functionalized with D-penicillamine (longer lifetimes and higher pH-sensitivity). A pH(±2σ) of 6.97 ± 0.14 was determined for C3H10T1/2 cells by FLIM employing this nanoprobe. In addition, the fluorescence lifetime signal remains nearly constant for C3H10T1/2 cells treated with CdSe/ZnS-PH for 24 h. These results show the promising applications of this nanoprobe to monitor the intracellular pH and cell state employing the FLIM technique.

Responsive Carbonized Polymer Dots for Optical Super-resolution and Fluorescence Lifetime Imaging of Nucleic Acids in Living Cells

The rapid development of advanced optical imaging methods including stimulated emission depletion (STED) and fluorescence lifetime imaging microscopy (FLIM) has provided powerful tools for real-time observation of submicrometer biotargets to achieve unprecedented spatial and temporal resolutions. However, the practical imaging qualities are often limited by the performance of fluorescent probes, leading to unsatisfactory results. In particular, long-term imaging of nucleic acids in living cells with STED and FLIM remained desirable yet challenging due to the lack of competent probes combining targeting specificity, biocompatibility, low power requirement, and photostability. In this work, we rationally designed and synthesized a nanosized carbonized polymer dot (CPD) material, CPDs-3, with highly efficient and photostable emission for the super-resolution and fluorescence lifetime imaging of nucleic acids in living cells. The as-fabricated nanoprobe showed responsive emission properties upon binding with nucleic acids, providing an excellent signal-to-noise ratio in both spatial and temporal dimensions. Moreover, the characteristic saturation intensity value of CPDs-3 was as low as 0.68 mW (0.23 MW/cm²), allowing the direct observation of chromatin structures with subdiffraction resolution (90 nm) at very low excitation (<1 μW) and depletion power (<5 mW). Owing to its low toxicity, high photonic efficiency, and outstanding photostability, CPDs-3 was capable of performing long-term imaging both with STED and FLIM setups, demonstrating great potential for the dynamic study of nucleic acid functionalities in the long run.

Highly fluorescent carbon dots as novel theranostic agents for biomedical applications

As an emerging fluorescent nanomaterial, carbon dots (CDs) exhibit many attractive physicochemical features, including excellent photoluminescence properties, good biocompatibility, low toxicity and the ability to maintain the unique properties of the raw material. Therefore, CDs have been intensively pursued for a wide range of applications, such as bioimaging, drug delivery, biosensors and antibacterial agents. In this review, we systematically summarize the synthesis methods of these CDs, their photoluminescence mechanisms, and the approaches for enhancing their fluorescence properties. Particularly, we summarize the recent research on the synthesis of CDs from drug molecules as raw materials and introduce the representative application aspects of these fascinating CDs. Finally, we look into the future direction of CDs in the biomedical field and discuss the challenges encountered in the current development.

An Overview of the Recent Developments in Carbon Quantum Dots—Promising Nanomaterials for Metal Ion Detection and (Bio)Molecule Sensing

The fluorescent carbon quantum dots (CQDs) represent an emerging subset of carbonaceous nanomaterials, recently becoming a powerful tool for biosensing, bioimaging, and drug and gene delivery. In general, carbon dots are defined as zero-dimensional (0D), spherical-like nanoparticles with <10 nm in size. Their unique chemical, optical, and electronic properties make CQDs versatile materials for a wide spectrum of applications, mainly for the sensing and biomedical purposes. Due to their good biocompatibility, water solubility, and relatively facile modification, these novel materials have attracted tremendous interest in recent years, which is especially important for nanotechnology and nanoscience expertise. The preparation of the biomass-derived CQDs has attracted growing interest recently due to their low-cost, renewable, and green biomass resources, presenting also the variability of possible modification for the enhancement of CQDs’ properties. This review is primarily focused on the recent developments in carbon dots and their application in the sensing of different chemical species within the last five years. Furthermore, special emphasis has been made regarding the green approaches for obtaining CQDs and nanomaterial characterization toward better understanding the mechanisms of photoluminescent behavior and sensing performance. In addition, some of the challenges and future outlooks in CQDs research have been briefly outlined.

Visual pH Sensors: From a Chemical Perspective to New Bioengineered Materials

Many human activities and cellular functions depend upon precise pH values, and pH monitoring is considered a fundamental task. Colorimetric and fluorescence sensors for pH measurements are chemical and biochemical tools able to sense protons and produce a visible signal. These pH sensors are gaining widespread attention as non-destructive tools, visible to the human eye, that are capable of a real-time and in-situ response. Optical “visual” sensors are expanding researchers’ interests in many chemical contexts and are routinely used for biological, environmental, and medical applications. In this review we provide an overview of trending colorimetric, fluorescent, or dual-mode responsive visual pH sensors. These sensors include molecular synthetic organic sensors, metal organic frameworks (MOF), engineered sensing nanomaterials, and bioengineered sensors. We review different typological chemical entities of visual pH sensors, three-dimensional structures, and signaling mechanisms for pH sensing and applications; developed in the past five years. The progression of this review from simple organic molecules to biological macromolecules seeks to benefit beginners and scientists embarking on a project of pH sensing development, who needs background information and a quick update on advances in the field. Lessons learned from these tools will aid pH determination projects and provide new ways of thinking for cell bioimaging or other cutting-edge in vivo applications.

Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications

Recent advances in nanomaterial design and synthesis has resulted in robust sensing systems that display superior analytical performance. The use of nanomaterials within sensors has accelerated new routes and opportunities for the detection of analytes or target molecules. Among others, carbon-based sensors have reported biocompatibility, better sensitivity, better selectivity and lower limits of detection to reveal a wide range of organic and inorganic molecules. Carbon nanomaterials are among the most extensively studied materials because of their unique properties spanning from the high specific surface area, high carrier mobility, high electrical conductivity, flexibility, and optical transparency fostering their use in sensing applications. In this paper, a comprehensive review has been made to cover recent developments in the field of carbon-based nanomaterials for sensing applications. The review describes nanomaterials like fullerenes, carbon onions, carbon quantum dots, nanodiamonds, carbon nanotubes, and graphene. Synthesis of these nanostructures has been discussed along with their functionalization methods. The recent application of all these nanomaterials in sensing applications has been highlighted for the principal applicative field and the future prospects and possibilities have been outlined.

Graphene Quantum Dots as Intracellular Imaging-Based Temperature Sensors

Non-invasive temperature sensing is necessary to analyze biological processes occurring in the human body, including cellular enzyme activity, protein expression, and ion regulation. To probe temperature-sensitive processes at the nanoscale, novel luminescence nanothermometers are developed based on graphene quantum dots (GQDs) synthesized via top-down (RGQDs) and bottom-up (N-GQDs) approaches from reduced graphene oxide and glucosamine precursors, respectively. Because of their small 3-6 nm size, non-invasive optical sensitivity to temperature change, and high biocompatibility, GQDs enable biologically safe sub-cellular resolution sensing. Both GQD types exhibit temperature-sensitive yet photostable fluorescence in the visible and near-infrared for RGQDs, utilized as a sensing mechanism in this work. Distinctive linear and reversible fluorescence quenching by up to 19.3% is observed for the visible and near-infrared GQD emission in aqueous suspension from 25 °C to 49 °C. A more pronounced trend is observed with GQD nanothermometers internalized into the cytoplasm of HeLa cells as they are tested in vitro from 25 °C to 45 °C with over 40% quenching response. Our findings suggest that the temperature-dependent fluorescence quenching of bottom-up and top-down-synthesized GQDs studied in this work can serve as non-invasive reversible/photostable deterministic mechanisms for temperature sensing in microscopic sub-cellular biological environments.