Biomass-Derived Carbon Molecular Sieves Applied to an Enhanced Carbon Capture and Storage Process (e-CCS) for Flue Gas Streams in Shallow Reservoirs

Recent Progress on Porous Carbons for Carbon Capture

High emission of carbon dioxide (CO2) has caused CO2 levels to reach more than 400 ppm in air and led to a serious climate problem. In addition, in confined spaces such as submarines and aircraft, the CO2 concentration increase in the air caused by human respiration also affects human health. In order to protect the environment and human health, the search for high-performance adsorbents for carbon capture from high and low concentration gas is particularly important. Porous carbon materials, possessing the advantages of low cost and renewability, have set off a boom in the research of porous adsorbents, which have the opportunity to be utilized on a large scale for industrial carbon capture in the future. In this review, we summarize the recent research progress of porous carbons for carbon capture from flue gas and directly from air in the last five years, including activated carbon (AC), heteroatom-modified porous carbon, carbon molecular sieves (CMS), and other porous carbon materials, with a focus on the effects of temperature, water content, and gas flow rate of industrial flue gas on the performance of porous carbon adsorbents. We summarize the preparation strategies of various porous carbons and seek environmental friendly porous carbon materials preparation strategies under the premise of improving the CO2 adsorption capacity and selectivity of porous carbon adsorbents. Based on the effects of real industrial flue gas on adsorbents, we provide new ideas and evaluation methods for the development and preparation of porous carbon materials.

Electrospun Composites Made of Reduced Graphene Oxide and Polyacrylonitrile-Based Activated Carbon Nanofibers (rGO/ACNF) for Enhanced CO2 Adsorption

In this work, we report the preparation of polyacrylonitrile (PAN)-based activated carbon nanofibers composited with different concentrations of reduced graphene oxide (rGO/ACNF) (1%, 5%, and 10% relative to PAN weight) by a simple electrospinning method. The electrospun nanofibers (NFs) were carbonized and physically activated to obtain activated carbon nanofibers (ACNFs). Texture, surface and elemental properties of the pristine ACNFs and composites were characterized using various techniques. In comparison to pristine ACNF, the incorporation of rGO led to changes in surface and textural characteristics such as specific surface area (S_BET), total pore volume (V_total), and micropore volume (V_micro) of 373 m²/g, 0.22 cm³/g, and 0.15 cm³/g, respectively, which is much higher than the pristine ACNFs (e.g., S_BET = 139 m²/g). The structural and morphological properties of the pristine ACNFs and their composites were studied by Raman spectroscopy and X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM) respectively. Carbon dioxide (CO₂) adsorption on the pristine ACNFs and rGO/ACNF composites was evaluated at different pressures (5, 10, and 15 bars) based on static volumetric adsorption. At 15 bar, the composite with 10% of rGO (rGO/ACNF0.1) that had the highest S_BET, V_total, and V_micro, as confirmed with BET model, exhibited the highest CO₂ uptake of 58 mmol/g. These results point out that both surface and texture have a strong influence on the performance of CO₂ adsorption. Interestingly, at p < 10 bar, the adsorption process of CO₂ was found to be quite well fitted by pseudo-second order model (i.e., the chemisorption), whilst at 15 bar, physisorption prevailed, which was explained by the pseudo-first order model.