Antibacterial Activity of Manganese Dioxide Nanosheets by ROS-Mediated Pathways and Destroying Membrane Integrity

Vanillic Acid Nanocomposite: Synthesis, Characterization Analysis, Antimicrobial, and Anticancer Potentials

Recently, nanoparticles have received considerable attention owing to their efficiency in overcoming the limitations of traditional chemotherapeutic drugs. In our study, we synthesized a vanillic acid nanocomposite using both chitosan and silver nanoparticles, tested its efficacy against lung cancer cells, and analyzed its antimicrobial effects. We used several characterization techniques such as ultraviolet-visible spectroscopy (UV-Vis), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDAX), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to determine the stability, morphological characteristics, and properties of the biosynthesized vanillic acid nanocomposites. Furthermore, the vanillic acid nanocomposites were tested for their antimicrobial effects against Escherichia coli and Staphylococcus aureus, and Candida albicans. The data showed that the nanocomposite effectively inhibited microbes, but its efficacy was less than that of the individual silver and chitosan nanoparticles. Moreover, the vanillic acid nanocomposite exhibited anticancer effects by increasing the expression of pro-apoptotic proteins (BAX, Casp3, Casp7, cyt C, and p53) and decreasing the gene expression of Bcl-2. Overall, vanillic acid nanocomposites possess promising potential against microbes, exhibit anticancer effects, and can be effectively used for treating diseases such as cancers and infectious diseases.

Multifunctional Hydrogel of Recombinant Humanized Collagen Loaded with MSCs and MnO2 Accelerates Chronic Diabetic Wound Healing

Chronic wound repair is a clinical treatment challenge. The development of multifunctional hydrogels is of great significance in the key aspects of treating chronic wounds, including reducing oxidative stress, promoting angiogenesis, and improving the natural remodeling of extracellular matrix and immune regulation. In this study, we prepared a composite hydrogel, sodium alginate (SA)@MnO2/recombinant humanized collagen III (RHC)/mesenchymal stem cells (MSCs), composed of SA, MnO2 nanoparticles, RHC, and MSCs. The hydrogel has high mechanical properties and good biocompatibility. In vitro, SA@MnO2/RHC/MSCs hydrogel effectively enhanced the formation of intricate tubular structures and angiogenesis and showed synergistic effects on cell proliferation and migration. In vivo, the SA@MnO2/RHC/MSCs hydrogel enhanced diabetes wound healing, rapid re-epithelization, favorable collagen deposition, and abundant wound angiogenesis. These findings demonstrated that the combined effects of SA, MnO2, RHC, and MSCs synergistically accelerate healing, resulting in a reduced healing time. These observed healing effects demonstrated the potential of this multifunctional hydrogel to transform chronic wound care and improve patient outcomes.

Xanthone Derivatives Enhance the Therapeutic Potential of Neomycin against Polymicrobial Gram-Negative Bacterial Infections

Gram-negative bacterial infections are difficult to manage as many antibiotics are ineffective owing to the presence of impermeable bacterial membranes. Polymicrobial infections pose a serious threat due to the inadequate efficacy of available antibiotics, thereby necessitating the administration of antibiotics at higher doses. Antibiotic adjuvants have emerged as a boon as they can augment the therapeutic potential of available antibiotics. However, the toxicity profile of antibiotic adjuvants is a major hurdle in clinical translation. Here, we report the design, synthesis, and biological activities of xanthone-derived molecules as potential antibiotic adjuvants. Our SAR studies witnessed that the p-dimethylamino pyridine-derivative of xanthone (X8) enhances the efficacy of neomycin (NEO) against Escherichia coli and Pseudomonas aeruginosa and causes a synergistic antimicrobial effect without any toxicity against mammalian cells. Biochemical studies suggest that the combination of X8 and NEO, apart from inhibiting protein synthesis, enhances the membrane permeability by binding to lipopolysaccharide. Notably, the combination of X8 and NEO can disrupt the monomicrobial and polymicrobial biofilms and show promising therapeutic potential against a murine wound infection model. Collectively, our results unveil the combination of X8 and NEO as a suitable adjuvant therapy for the inhibition of the Gram-negative bacterial infections.

Antibacterial ZnO@CeO2 nanocrystals: Prospective material for control of foodborne pathogens

Foodborne microbial infections are leading cause of many deadly illnesses. As a result, there is an anticipated need for the development of innovative packaging materials with effective antibacterial potential. This article describes preparation and characterization of innovative ZnO@CeO2 nanocrystals through a facile hydrothermal method, as well as their outstanding antibacterial properties. The ZnO@CeO2 nanocrystals used were prepared using precursors zinc acetate and cerium nitrate at 180°C. Various sophisticated physicochemical parameters were used to assess nanocrystals. The antibacterial activity was examined using minimum inhibitory concentration technique against four major foodborne pathogenic bacteria, namely Staphylococcus aureus (Gram positive), Escherichia coli, Salmonella typhimurium and Klebsiella pneumoniae (Gram negative) at four distinct concentrations (0-400 µg/mL). The in vitro cell compatibility test was done on fibroblasts. According to our findings, the lowest concentration of ZnO@CeO2 nanocrystals limiting development of tested strains is 100 µg/mL. Additionally, the results show that the combination of ZnO and CeO2 can be synergistic, resulting in ZnO@CeO2 nanocrystals with enhanced antibacterial activity. To summarize, unique ZnO@CeO2 nanocrystals with a high surface-to-volume ratio with outstanding antibacterial activity and no harmful impact to mouse fibroblasts were shaped. The ZnO@CeO2 can be utilized to competently suppress microbial growth spoiling the food and could be utilized as economical and efficient future packaging material for food industries.

Green synthesis of MnO2-embedded Rauvolfia tetraphylla leaves (MnO2@RTL) for crystal violet dye removal and as an antibacterial agent

The application of green synthesized nanocomposites for the prevention of environmental pollution is increasing nowadays. Here, a green composite has been synthesized by embedding MnO2 on Rauvolfia tetraphylla leaves using its leaf extract hereinafter termed as MnO2@RTL, and demonstrated for crystal violet (CV) dye removal from simulated and real wastewater. The surface properties of the material were determined by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD), and Brunauer-Emmet-Teller (BET) surface area, pHZPC, and zeta potential. The material exhibits a remarkable adsorption capacity of 61.162 mg/g at 328 K and pH 7. The adsorption was best fitted with Pseudo-second-order kinetic (R2 = 0.998) and a combination of Langmuir and Freundlich isotherm model (R2 = 0.994-0.999). The thermodynamic study revealed spontaneous (ΔG values =  - 2.988 to - 4.978 kJ/mol) and endothermic (ΔH values = 6.830 to 11.018 kJ/mol) adsorption. After adsorption, 80% regeneration occurred with 50% methanol, and recycled up to five times. Advantageously, the material was able to remove CV dye in the presence of coexistent ions and from industrial wastewater, confirming field applicability. The adsorption capacity of the material is superior to previously reported materials. The standard deviation and relative standard deviations have been evaluated to be 0.000422-0.000667 and 0.473-0.749%, which suggests the reliability of the experiments. The exhausted material, after recycling, was pyrolyzed to overcome the disposal problem. It was established as a secondary adsorbent with 73% efficiency which makes the material win-win. The material showed antibacterial properties with Staphylococcus aureus bacteria with a zone of inhibition 5 mm.

Revisiting the Formation of Starch-Monoglyceride-Protein Complexes: Effects of Octenyl Succinic Anhydride Modification

Starch-lipid-protein complexes are attracting increasing attention due to their unique structure and low enzymatic digestibility. However, the mechanisms underlying the formation of these ternary complexes, especially those with monoglycerides as the lipid component, remain unclear. In the present study, potato starch or octenyl succinic anhydride (OSA)-modified potato starch (OSAPS), various monoglycerides (MGs), and beta-lactoglobulin (βLG) were used in model systems to characterize the formation, structure, and in vitro digestibility of the respective ternary complexes. Colorimetry and live/dead staining assays demonstrated that the OSAPS had good biocompatibility. Experimental data and molecular dynamics simulations showed that both unmodified potato starch and OSAPS formed starch-lipid-protein complexes with MGs and βLG. Of the two types of starch, OSA formed a greater amount of the more stable type II V-crystallites in complexes, which had greater resistance to in vitro enzymic digestion. This study demonstrated for the first time that starch can interact with MGs and βLG to form ternary complexes and that OSA esterification of starch promoted the formation of more complexes than unmodified starch.

Hydrothermal integration of MoO2-MoS2@rGO nanoframe networks: A promising approach for efficient bacterial disinfection in wastewater

The efficient disinfection of bacterial contaminants in wastewater is a critical challenge in the field of environmental remediation. Herein, we present a novel approach for efficient bacterial disinfection using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The developed nanoframe networks exhibit a unique architecture comprising of molybdenum dioxide (MoO2) and molybdenum disulfide (MoS2) impregnated on algae biomass reduced graphene oxide (rGO). The as-synthesized nanoframe networks demonstrate exceptional antibacterial activity against Escherichia coli bacteria. The disinfection efficiency was evaluated by measuring the bacterial viability and observing the morphological changes using scanning electron microscopy. The MoO2-MoS2@rGO nanoframe networks exhibited a remarkable antibacterial effect, achieving a high disinfection rate of 95.8% within a short contact time of 10 min. The efficient bacterial disinfection capability of the nanoframe networks can be attributed to the synergistic effects of MoO2, MoS2, and rGO components. The MoO2 nanoparticles generate reactive oxygen species (ROS), persuading oxidative stress and leading to bacterial inactivation. The MoS2 nanoparticles possess inherent antibacterial properties through the release of Mo and S ions. The rGO nanosheets provide a conductive and stable platform, facilitating the charge transfer during the antibacterial process. Furthermore, the hydrothermal integration method enables easy scalability and cost-effectiveness of the MoO2-MoS2@rGO nanoframe networks. The nanoframe networks can be easily recovered and reused, reducing waste generation and promoting sustainability. Overall, this study presents a promising approach for efficient bacterial disinfection in wastewater using hydrothermally integrated MoO2-MoS2@rGO nanoframe networks. The remarkable antibacterial performance, along with the advantages of scalability and reusability, makes these nanoframe networks a potential candidate for practical applications in environmental remediation and water treatment processes.

Fabrication and characterization of manganese dioxide (MnO2) nanoparticles and its degradation potential of benzene and pyrene

MnO2 nanoparticles have a wide range of applications, including catalytic abilities due to their oxygen reduction potential. Industrial processes and the burning of organic materials released PAHs into the biosphere which have adverse effects on living organisms when continually exposed. In this study, MnO2 nanoparticles were synthesized chemically using sodium thiosulphate as reducing agent. MnO2 nanoparticles were characterized using UV-visible adsorption spectroscopy and Fourier Transform Infrared Spectroscopy (FTIR). A X-Ray Diffraction Spectrophotometer (XRD), a Scanning Electron Microscopy - Energy Dispersive X-Ray Analyzer (SEM-EDAX), and Dynamic Light Scattering (DLS) were used to identify the crystalline nature and particle size of the fabricated MnO2 nanoparticles. Batch adsorption studies were conducted to identify the optimal conditions for better benzene and pyrene adsorption from aqueous solution using MnO2 nanoparticles. They are also effective in degrading benzene and pyrene by batch adsorption as determined by their adsorption isotherms and kinetics.

Exploring the effect of surfactants on the interactions of manganese dioxide nanoparticles with biomolecules

Interactions of manganese dioxide nanoparticles (MnO2 NPs) with vital biomolecules namely deoxyribonucleic acid (DNA) and serum albumin (BSA) have been studied in association with different surfactants by using fluorescence (steady state, synchronous and 3D), UV-visible, resonance light scattering (RLS), dynamic light scattering (DLS), and sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The esterase activity of serum albumin was tested in associations with MnO2 NPs and surfactants. The antioxidant potential of prepared NPs was also evaluated (DPPH method). Gel electrophoresis was carried out to analyze the effect of MnO2 NPs and surfactants on DNA. Presence of CTAB, Tween 20, DTAB and Tween 80 enhanced nanoparticle-protein binding. Tween 20 based nanoparticle systems showed long-term stability and biocompatibility. The quenching of BSA fluorescence emission in presence of MnO2 NPs alone and along with Tween 20 revealed stronger association of nanoparticles with proteins. Enhancement in the esterase activity (BSA) was observed in the presence of Tween 20. Furthermore, radical scavenging activity showed highest antioxidant potential in presence of Tween 20. The enthalpy and entropy assessment for protein-NPs association showed the predominance of Vander Waals interactions and hydrogen bonding. The synchronous fluorescence analysis highlighted the involvement of tryptophan (Trp) in the MnO2 NPs-protein interactions. The study evaluates the influence of surfactant on the associations of MnO2 NPs with the essential biomolecules. The findings can be crucially utilized in designing biocompatible MnO2 formulations for long term applications.Communicated by Ramaswamy H. Sarma.

Chitosan grafted polyacrylic acid doped MnO2 nanocomposite an efficient dye degrader and antimicrobial agent

Manganese dioxide (MnO2) nanorods and (3, 6, and 9 mL) chitosan grafted polyacrylic acid (CS-g-PAA) doped MnO2 were prepared hydrothermally. The study objective is to decrease the recombination rate of MnO2 upon doping to enhance the dye degradation efficiency and antimicrobial activity. The doping-dependent properties of CS-g-PAA on phase identification, functional groups, optical characteristics, elemental compositions, and morphological analyses of MnO2 nanorods were conducted using systematic characterization techniques. XRD pattern shows that MnO2 has a tetragonal structure, with increased crystallite size (15.87 to 29.36 nm) upon doping. The TEM analysis showed that MnO2 has nanorods and that CS-g-PAA doped MnO2 displayed nanoflakes-like structures. The decrease in electron-hole pair recombination rate on doping was verified by PL spectroscopy, demonstrating the enhanced catalytic activity. Moreover, adding grafted binary polymers to MnO2 inhibits bacterial cell growth by binding with the negatively charged cell wall and preventing biofilm formation. The 9 mL doped sample displayed a maximum degradation (99.27 %) in a neutral medium and 85.84 % antimicrobial efficiency against E. coli. The enoyl-acyl carrier protein reductase (FabIE. coli) and DNA gyrase(E. coli) were inhibited by these CS-g-PAA doped MnO2 nanostructures (NSs), as shown by in silico molecular docking studies.

One-step hydrothermal generation of oxygen-deficient N-doped blue TiO2-Ti3C2 for degradation of pollutants and antibacterial properties

In this study, TiO2 was generated in situ on the surface of Ti3C2 by a hydrothermal process, and urea was added to form N-doped TiO2-Ti3C2. The surface morphology and functional group properties of the prepared materials were analyzed by SEM, TEM, XRD, XPS, etc. The results showed that anatase TiO2 formed on the surface of the Ti3C2 monolayer. Nitrogen-doped nanomaterials show good phenol degradation and good recyclability under visible light. At a urea content of 0.5 g, the photocatalytic degradation of phenol under visible light is best, reaching 88.9% in 3 h, with ·OH and ·O2- holes playing the leading role. However, at lower pH and higher ion concentration, the degradability of N-TiO2-Ti3C2 for phenol is reduced. Furthermore, the material prepared in this work is a two-dimensional layered material, and the adsorption of phenol best fits the Langmuir adsorption isotherm model and the pseudo-second-order kinetic equation. In terms of the antibacterial performance of the material, the N-doped TiO2-Ti3C2 nanomaterial made with 0.2 g of urea has an Escherichia coli scavenging efficiency of about 97.86%, which is an excellent antibacterial material. This study shows that the N-TiO2-Ti3C2 produced in this experiment can be used for environmental applications.

Effectiveness of metal and metal oxide nanoparticles against bacterial biofilms: Perspectives and limitations

In the last few years, there has been a necessary demand in the pharmaceutical industries for finding a treatment against biofilms formed by different bacterial species. We are aware of the fact that classical processes, which are already there for the removal of bacterial biofilms gives a very low efficiency and consequently antimicrobial resistance makes it even worse. To cope up with the cited problems, scientists from the past few years are inclining toward various types of nanoparticle based treatment procedures as a pharmaceutical agent against bacterial biofilms. Nanoparticles are known for their extremely efficient antimicrobial properties. The current review gives a description of different types of metal oxide nanoparticles and their antibiofilm properties. It also shows a comparative analysis of the nanoparticles and depicts the efficiency rates of biofilm degradation in each of them. It explains the mechanism of the nanoparticles through which the disintegration of bacterial biofilm is carried out. Lastly, the review throws light upon the limitations of different nanoparticles, their safety issues, the mutagenicity, genotoxicity concerns, and toxicity hazards caused by them.

Injectable, antibacterial, and oxygen-releasing chitosan-based hydrogel for multimodal healing of bacteria-infected wounds

Bacterial infection is one of the main challenges of wound healing. It imposes financial and healthcare costs. The emergence of antibiotic-resistant bacteria has increased concerns about this challenge, and made finding alternative solutions a crucial aim. We created a new, antibacterial, multifunctional hydrogel with synergistic chemodynamic and photothermal features for wound-healing applications. We fabricated a chitosan (CT)-based hydrogel containing tannic acid (TA), Fe, and MnO2 nanosheets (CT-TA-Fe-MnO2) via a simple method and characterized it. The antibacterial features (resulting from the production of reactive oxygen species within bacterial cells) and healing ability (via anti-inflammatory and hemostatic features) of the hydrogel were confirmed in vitro. In vivo results revealed the effectiveness of the CT-TA-Fe-MnO2 hydrogel in decreasing the hemostatic time, improving anti-inflammatory effects, and promoting wound healing during 14 days by enhancing the deposition and maturation of collagen fibers without affecting the vital organs. The fabricated CT-TA-Fe-MnO2 hydrogel could be a promising candidate with antibacterial and anti-inflammatory activities suitable for wound-healing applications.

Production of Ceramics/Metal Oxide Nanofibers via Electrospinning: New Insights into the Photocatalytic and Bactericidal Mechanisms

Environmental pollution is steadily rising and is having a negative influence on all living things, especially human beings. The advancement of nanoscience in recent decades has provided potential to address this issue. Functional metal oxide nanoparticles/nanofibers have been having a pull-on effect in the biological and environmental domains of nanobiotechnology. Current work, for the first time, is focusing on the electrospinning production of Zr_0.5Sn_0.5TiO₃/SnO₂ ceramic nanofibers that may be utilized to battle lethal infections swiftly and inexpensively. By using characterizations like XRD, FT-IR, FESEM, TEM, PL, and UV-Vis-DRS, the composition, structure, morphology, and optical absorption of samples were determined. The minimum inhibitory concentration (MIC) approach was used to investigate the antibacterial activity. Notably, this research indicated that nanofibers exert antibacterial action against both Gram-positive and Gram-negative bacteria with a MIC of 25 µg/mL. Furthermore, negatively charged E. coli was drawn to positively charged metal ions of Zr_0.5Sn_0.5TiO₃/SnO₂, which showed a robust inhibitory effect against E. coli. It was interesting to discover that, compared to pure TiO₂, Zr_0.5Sn_0.5TiO₃/SnO₂ nanofibers revealed increased photocatalytic activity and exceptional cyclability to the photodegradation of Rhodamine B. The composite completely degrades dye in 30 min with 100% efficacy and excellent (97%) reusability. The synergetic effects of Zr_0.5Sn_0.5TiO₃ and SnO₂ may be responsible for increased photocatalytic and bactericidal activity.

Research progress in green synthesis of manganese and manganese oxide nanoparticles in biomedical and environmental applications - A review

Nanomaterials and nanotechnology have this unassailable position for environmental remediation and medicine. Currently, global environmental pollution and public health problems are increasing and need to be urgently addressed. Manganese (Mn) is one of the essential metal elements for plants and animals, it is necessary to integrate with nanotechnology. Mn and Mn oxide (MnO) nanoparticles (NPs) have applications in dye degradation, biomedicine, electrochemical sensors, plant and animal growth, and catalysis. However, the current research is limited, especially in terms of optimal synthesis of Mn and MnO NPs, separation, purification conditions, and the development of potential application areas is too basic and do not support by in-depth studies. Hence, this review comprehensively discusses the classification, green synthesis methods, and applications of Mn and MnO NPs in biomedical, environmental, and other fields and gives a perspective for the future.

In situ oxidized TiO2/MXene ultrafiltration membrane with photocatalytic self-cleaning and antibacterial properties

Self-cleaning, antimicrobial ultrafiltration membranes are urgently needed to alleviate the low flux problems caused by membrane fouling in water treatment processes. In this study, in situ generated nano-TiO₂ MXene lamellar materials were synthesized and then 2D membranes were fabricated using vacuum filtration. The presence of nano TiO₂ particles as an interlayer support layer widened the interlayer channels, and also improved the membrane permeability. The TiO₂/MXene composite on the surface also showed an excellent photocatalytic property, resulting in enhanced self-cleaning properties and improved long-term membrane operational stability. The best overall performance of the TiO₂/MXene membrane at 0.24 mg cm^-2 loading was optimal, with 87.9% retention and 211.5 L m^-2 h^-1 bar^-1 flux at a filtration of 1.0 g L^-1 bovine serum albumin solution. Noticeably, the TiO₂/MXene membranes showed a very high flux recovery under UV irradiation with a flux recovery ratio (FRR) of 80% as compared to the non-photocatalytic MXene membranes. Moreover, the TiO₂/MXene membranes demonstrated over 95% resistance against E. coli. And the XDLVO theory also showed that the loading of TiO₂/MXene slowed down the fouling of the membrane surface by protein-based contaminants.

Structure evolution of air cathodes and their application in electrochemical sensor development and wastewater treatment

Cathode structure and material are the most important factors to determine the performance and cost of single chamber air-cathode microbial fuel cell (MFC), which is the most promising type of MFC technology. Since the first air cathode was invented in 2004, five major structures (1-layer, 2-layer, 3-layer, 4-layer and separator-support) have been invented and modified to fit new material, improve power performance and lower MFC cost. This paper reviewed the structure evolution of air cathodes in past 18 years. The benefits and drawbacks of these structures, in terms of power generation, material cost, fabrication procedure and modification process are analyzed. The practical application cases (e.g., sensor development and wastewater treatment) employed with different cathode structures were also summarized and analyzed. Based on practical performance and long-term cost analysis, the 2-layer cathode demonstrated much greater potential over other structures. Compared with traditional activated-sludge technology, the cost of an MFC-based system is becoming competitive when employing with 2-layer structure. This review not only provides a detailed development history of air cathode but also reveals the advantages/disadvantages of air cathode with different structures, which will promote the research and application of air-cathode MFC technology.

Synthesis of Ti3C2T x /MnO2 composites for synergistic catalytic/photothermal-based bacterial inhibition

Human inflammation caused by bacterial infection threatens global public health. The abuse of antibiotics often leads to the development of drug resistance in bacteria. To address this issue, nanozymes with peroxidase-like (POD-like) activity have often been reported for bacteriostasis with the assistance of catalytic substrate hydrogen peroxide (H2O2). However, it is difficult to achieve efficient bactericidal outcomes only through exertion of the POD-like activity of nanozymes. Here, MnO2 loaded Ti3C2T x (Ti3C2T x /MnO2) was prepared by a two-step reaction method, in which MnO2 showed high oxidase-like (OXD-like) activity to elevate the levels of reactive oxygen species (ROS) without H2O2 and Ti3C2T x exhibited high photothermal conversion efficiency to induce hyperthermia. Thus, the obtained Ti3C2T x /MnO2 realized synergistic catalytic/photothermal-based bacterial inhibition, including for Gram-negative bacteria (Escherichia coli), Gram-positive bacteria (Staphylococcus aureus), and methicillin-resistant Staphylococcus aureus. Importantly, Ti3C2T x /MnO2 with near-infrared light irradiation successfully promoted Staphylococcus aureus-infected wound healing in mouse models, representing an alternative treatment to fight against bacterial infection.

Nanoparticle-mediated therapeutic management in cholangiocarcinoma drug targeting: Current progress and future prospects

Patients with cholangiocarcinoma (CCA) often have an unfavorable prognosis because of its insidious nature, low resectability rate, and poor response to anticancer drugs and radiotherapy, which makes early detection and treatment difficult. At present, CCA has a five-year overall survival rate (OS) of only 5%, despite advances in therapies. New an increasing number of evidence suggests that nanoplatforms may play a crucial role in enhancing the pharmacological effects and in reducing both short- and long-term side effects of cancer treatment. This document reviews the advantages and shortcomings of nanoparticles such as liposomes, polymeric nanoparticle，inorganic nanoparticle, nano-metals and nano-alloys, carbon dots, nano-micelles, dendrimer, nano-capsule, bio-Nanomaterials in the diagnosis and treatment of CCA and discuss the current challenges in of nanoplatforms for CCA.

Immunomodulatory activity of manganese dioxide nanoparticles: Promising for novel vaccines and immunotherapeutics

Manganese (Mn), a nutrient inorganic trace element, is necessary for a variety of physiological processes of animal body due to their important roles in oxidative regulation effects and other aspects of activities. Moreover, manganese ion (Mn²⁺) has widely reported to be crucial for the regulations of different immunological responses, thus showing promising application as potential adjuvants and immunotherapeutics. Taking the advantages of Mn-based biological and immunological activities, Manganese dioxide nanoparticles (MnO₂ NPs) are a new type of inorganic nanomaterials with numerous advantages, including simple preparation, low cost, environmental friendliness, low toxicity, biodegradable metabolism and high bioavailability. MnO₂ NPs, as a kind of drug carrier, have also shown the ability to catalyze hydrogen peroxide (H₂O₂) to produce oxygen (O₂) under acidic conditions, which can enhance the efficacy of radiotherapy, chemotherapy and other therapeutics for tumor treatment by remodeling the tumor microenvironment. More importantly, MnO₂ NPs also play important roles in immune regulations both in innate and adaptive immunity. In this review, we summarize the biological activities of Manganese, followed by the introduction for the biological and medical functions and mechanisms of MnO₂ NPs. What's more, we emphatically discussed the immunological regulation effects and mechanisms of MnO₂ NPs, as well as their potentials to serve as adjuvants and immunomodulators, which might benefit the development of novel vaccines and immunotherapies for more effective disease control.

MnO2-DNA nanomaterials toward the dual signal detection of P-aminophenol micropollutants

P-Aminophenol (PAP), a potentially toxic and mutagenic compound, is widely distributed in water and soil and has serious side effects on human health. This study presents a convenient, sensitive, and effective dual-signal assay for the detection of PAP in the environment. Two-dimensional manganese dioxide (MnO₂) nanosheets were used as the carrier and quencher for fluorophore-labelled DNA to form a dual-signal nanoprobe, MnO₂-DNA. Based on a specific redox reaction between the MnO₂ nanosheets and target PAP, the corresponding absorption intensity of the product and the fluorescence intensity were both "turn-on" and also exhibited excellent correlation with the concentration of PAP. This strategy not only remarkably simplifies the detection process but also improves the reliability of results due to the dual-signal response, which has promising applications in environmental, clinical, and industrial research fields.

Manganese Dioxide Nanoparticles Prepared by Laser Ablation as Materials with Interesting Electronic, Electrochemical, and Disinfecting Properties in Both Colloidal Suspensions and Deposited on Fluorine-Doped Tin Oxide

Nanoparticles (NPs) of α-MnO₂ have high applicability in photoelectrochemical, heterogeneous photocatalysis, optical switching, and disinfection processes. To widen this panorama about MnO₂ NPs, the formation of this material by laser ablation and deposition by dip-coating on fluorine-doped tin oxide (FTO), were considered in this study. The optical, spectroscopic, electrochemical characterization, and the evaluation of the antimicrobial activity, plus the photocatalytic response, were measured herein in colloidal media and deposited. For the deposition of NPs on FTO sheet, an anode is produced with a pseudocapacitive behavior, and 2.82 eV of band gap (GAP) in comparison with colloidal NPs for a value of 3.84 eV. Both colloidal suspension and deposited NPs have intrinsic antibacterial activity against two representative microorganisms (E. coli and S. aureus), and this biological activity was significantly enhanced in the presence of UVA light, indicating photocatalytic activity of the material. Thus, both the colloidal suspension and deposited NPs can act as disinfecting agents themselves or via light activation. However, an antibacterial behavior different for E. coli and S. aureus was observed, in function of the aggregation state, obtaining total E. coli disinfection at 30 min for deposited samples on FTO.

In Vitro Antimicrobial Effects and Inactivation Mechanisms of 5,8-Dihydroxy-1,4-Napthoquinone

Naphthoquinones are an important class of natural organic compounds that have antimicrobial effects. However, the mechanisms of their action remain to be elucidated. Therefore, the antimicrobial activity of the chemically synthesized naphthoquinone derivative, 5,8-dihydroxy-1,4-naphthoquinone, was investigated in this study against 10 different microorganisms. Its inhibitory activity was evident against Bacillus cereus, Proteus vulgaris, Salmonella enteritidis, Staphylococcus epidermidis, S. aureus, and Candida albicans, and its MIC50 values were determined to be 14, 10, 6, 2, 4, 1.2, and <0.6 µg/mL, respectively. Moreover, the crystal violet uptake, TTC dehydrogenase activity, protein/DNA leakage, and DNA damage of the compound in these microorganisms were also investigated to reveal the antimicrobial mechanisms. In addition, scanning electron microscopy was used to detect physiological damage to the cell membrane of S. epidermidis, S. aureus, and C. albicans, which was most severe in the crystal violet uptake assay. The overall results showed that 5,8-dihydroxy-1,4-naphthoquinone exhibited its effects on S. aureus, S. epidermidis, and C. albicans by various mechanisms, especially membrane damage and membrane integrity disruption. It also caused DNA leakage and damage along with respiratory chain disruption (78%) in C. albicans. Similarly, it caused varying degrees of reduction in the respiratory activity of S. aureus (47%), S. epidermidis (16%), B. cereus (12%), S. enteritidis (9%), and P. vulgaris (8%). Therefore, 5,8-dihydroxy-1,4-naphthoquinone proved to be a very effective antifungal and antibacterial agent and could be considered a new potential drug candidate, inspiring further discoveries in these microorganisms.

Research trends in biomedical applications of two-dimensional nanomaterials over the last decade - A bibliometric analysis

Two-dimensional (2D) nanomaterials with versatile properties have been widely applied in the field of biomedicine. Despite various studies having reviewed the development of biomedical 2D nanomaterials, there is a lack of a study that objectively summarizes and analyzes the research trend of this important field. Here, we employ a series of bibliometric methods to identify the development of the 2D nanomaterial-related biomedical field during the past 10 years from a holistic point of view. First, the annual publication/citation growth, country/institute/author distribution, referenced sources, and research hotspots are identified. Thereafter, based on the objectively identified research hotspots, the contributions of 2D nanomaterials to the various biomedical subfields, including those of biosensing, imaging/therapy, antibacterial treatment, and tissue engineering are carefully explored, by considering the intrinsic properties of the nanomaterials. Finally, prospects and challenges have been discussed to shed light on the future development and clinical translation of 2D nanomaterials. This review provides a novel perspective to identify and further promote the development of 2D nanomaterials in biomedical research.

NIR-activated multi-hit therapeutic Ag2S quantum dot-based hydrogel for healing of bacteria-infected wounds

Hydrogel dressings are highly biocompatible and can maintain a moist wound environment, suggesting constructing an efficient multi-modal antibacterial hydrogel platform is a promising strategy for treating bacterial wound infections. In this work, a composite Ag₂S quantum dot/mSiO₂ NPs hydrogel (NP hydrogel) with antibacterial ability was constructed by incorporating Ag₂S quantum dots (QDs) modified by mesoporous silica (mSiO₂) into the network structure of 3-(trimethoxylmethosilyl) propyl methacrylate based on free radical polymerization. The NP hydrogel showed outstanding controllable photothermal and photodynamic characteristics under 808 nm near infrared (NIR) light irradiation, with a photothermal conversion efficiency of 57.3%. Additionally, the release of Ag⁺ could be controlled by the inherent volume change of the NP hydrogel made of N-isopropylacrylamide (NIPAAm) and acrylamide (AAm) during NIR laser exposure, with the embedded Ag₂S QDs working as a reservoir to release Ag⁺ continuously from the hydrogel matrix to achieve bactericidal activity. The synergetic effects between hyperthermia, radical oxygen species, and Ag⁺ released under NIR radiation endowed the NP hydrogel with prominent antibacterial properties against Escherichia coli (E. coli) and methicillin-resistant Staphylococcus aureus (MRSA), with an inhibition rate of 99.7% and 99.8%, respectively. In vivo wound healing experiments indicated that the NP hydrogel could enhance bacterial clearance, increase collagen coverage area and up-regulate VEGF expression, exhibiting high biocompatibility. Overall, this study proposed an efficient and highly biocompatible multi-modal therapeutic nanohydrogel, opening up a new way for developing broad-spectrum antibacterial wound dressings to treat bacterial wound infections. STATEMENT OF SIGNIFICANCE: Bacterial wound infection is still one of the most difficult medical problems. In this work, a stimulating NIR-responsive hydrogel encapsulating functional Ag₂S QDs was prepared, which showed high photothermal conversion efficiency (57.3%) and outstanding antibacterial ability under 808 nm NIR laser, killing 99.7% and 99.8% of E. coli and MRSA in 4 min, respectively. During NIR light irradiation, the release rate of Ag⁺ could be regulated by the intrinsic volume transition of the hydrogel, leading to remarkable antibacterial properties in vitro and in vivo under the combined action of hyperthermia, radical oxygen species and Ag⁺ released. This study proposed a novel multi-modal therapeutic nanohydrogel, opening up a new way for developing broad-spectrum antibacterial wound dressings to treat bacterial wound infections.

Immobilized arginine/tryptophan-rich cyclic dodecapeptide on reduced graphene oxide anchored with manganese dioxide for microbial biofilm eradication

To avoid the accumulation of bacterial biofilms in water pipelines, it is critical to develop potent antimicrobial agents with good ability to reduce extracellular polymeric substances (EPS). In this study, cyclic dodecapeptides were synthesized, and different mutations for increasing the ratio of arginine (Arg) and tryptophan (Trp) were introduced. Separately, the synthesized dodecapeptides were immobilized on a reduced graphene oxide nanocomposite anchored with a hierarchical β-MnO₂ (RGO/β-MnO₂) hybrid. With a minimum inhibitory concentration of 0.97 g/mL, the immobilized Arg-Trp rich antimicrobial peptides (AMP) on RGO/MnO₂ nanocomposite, Cdp-4/RGO/MnO₂, showed superior efficacy against multidrug-resistant Pseudomonas aeruginosa ATCC 15692 (P. aeruginosa) planktonic cells. The immobilized Cdp-4/RGO/β-MnO₂ also eradicated the mature biofilm by 99% with a minimum inhibitory concentration value of 62.5 µg/mL with significant reduction of EPS. These characteristics allow the use of the immobilized Arg-Trp rich AMP as a promising antimicrobial agent against microbial biofilms, present in water distribution systems.

Current Knowledge on the Oxidative-Stress-Mediated Antimicrobial Properties of Metal-Based Nanoparticles

The emergence of multidrug-resistant (MDR) bacteria in recent years has been alarming and represents a major public health problem. The development of effective antimicrobial agents remains a key challenge. Nanotechnologies have provided opportunities for the use of nanomaterials as components in the development of antibacterial agents. Indeed, metal-based nanoparticles (NPs) show an effective role in targeting and killing bacteria via different mechanisms, such as attraction to the bacterial surface, destabilization of the bacterial cell wall and membrane, and the induction of a toxic mechanism mediated by a burst of oxidative stress (e.g., the production of reactive oxygen species (ROS)). Considering the lack of new antimicrobial drugs with novel mechanisms of action, the induction of oxidative stress represents a valuable and powerful antimicrobial strategy to fight MDR bacteria. Consequently, it is of particular interest to determine and precisely characterize whether NPs are able to induce oxidative stress in such bacteria. This highlights the particular interest that NPs represent for the development of future antibacterial drugs. Therefore, this review aims to provide an update on the latest advances in research focusing on the study and characterization of the induction of oxidative-stress-mediated antimicrobial mechanisms by metal-based NPs.

Manganese oxide nanomaterials for bacterial infection detection and therapy

Bacterial infection has received substantial attention and poses a serious threat to human health. Although antibiotics can effectively fight against bacterial infection, the occurrence of antibiotic resistance has become increasingly serious in recent years, which tremendously hinders its clinical application. Consequently, it is urgent to explore novel strategies to achieve efficacious treatment of bacterial diagnosis and detection. Manganese dioxide (MnO₂) nanomaterial has been extensively reported in tumor therapy. Nevertheless, there are few antibacterial reviews of MnO₂. Herein, we will discuss the applications of MnO₂ in the detection and treatment of bacterial infection, including photodynamic therapy, immunotherapy, improvement of hypoxia, dual-modal combination therapy, reactive oxygen species scavenging, magnetic resonance imaging, optical application of acoustic imaging, and so forth. This review is expected to provide meaningful guidance on further research of MnO₂ nanomaterial for antibacterial applications.

Biogenic Synthesis of MnO2 Nanoparticles With Leaf Extract of Viola betonicifolia for Enhanced Antioxidant, Antimicrobial, Cytotoxic, and Biocompatible Applications

In this study, we propose to synthesize NPs using plant extract containing active biomedical components, with the goal of obtaining NPs that inherit the biomedical activities of the plant. Herein, we report the synthesis of manganese dioxide nanoparticles (VBLE-MnO₂ NPs) using the leaves extract of Viola betonicifolia, in which the biological active plant's secondary metabolites function as both reducing and capping agents. The synthesized NPs were successfully characterized with different spectroscopic techniques. The antibacterial, antifungal, and biofilm inhibition properties of the synthesized VBLE-MnO₂ NPs were further explored against a variety of bacteria (Gram-positive and Gram-negative) and mycological species. Additionally, their antioxidant ability against linoleic acid peroxidation inhibition, cytobiocompatibility with hMSC cells, and cytotoxicity against MCF-7 cells were investigated compared to leaves extract and chemically synthesized manganese dioxide NPs (CH-MnO₂ NPs). The results were demonstrated that the synthesized VBLE-MnO₂ NPs presented excellent antibacterial, antifungal, and biofilm inhibition performance against all the tested microbial species compared to plant leaves extract and CH-MnO₂ NPs. Moreover, they also exhibited significant antioxidant potential, which was comparable to the external standard (ascorbic acid); however, it was higher than plant leaves extract and CH-MnO₂ NPs. Furthermore, the synthesized CH-MnO₂ NPs displayed good cytobiocompatibility with hMSC cells compared to CH-MnO₂ NPs. The enhanced antioxidant, antibacterial, antifungal, and biofilm inhibition efficacy as compared to CH-MnO₂ NPs might be attributed to the synergistic effect of the VBLE-MnO₂ NPs' physical properties and the adsorbed biologically active phytomolecules from the leaves extract of V. betonicifolia on their surface. Thus, our study establishes a novel ecologically acceptable route for nanomaterials' fabrication with increased and/or extra medicinal functions derived from their herbal origins.

Manganese dioxide nanozyme for reactive oxygen therapy of bacterial infection and wound healing

Reactive oxygen species (ROS) are the weapons of neutrophiles against bacterial pathogens, and also the central effectors in reactive oxygen therapy for skin and soft tissue infection. Nanozymes that spontaneously generate ROS under physiological conditions are new antibacterials that hold promise towards multidrug resistant pathogens. The clinical use of the nanozymes is however limited by their low biocompatibility and toxicity in vivo. Here, we develop an oleic acid (OA) nanoemulsion template method for the one-pot synthesis of OA-manganese dioxide (MnO₂) nanozyme. The OA-MnO₂ nanozyme showed high stability and biocompatibility under physiological conditions with marked oxidase-like activity. The ROS generated by the OA-MnO₂ nanozyme effectively kill the Gram-positive Staphylococcus aureus and the Gram-negative Escherichia coli strains. Moreover, the OA-MnO₂ nanozyme shows promising abilities to prevent and destruct biofilm formation by Staphylococcus aureus, and result in superior in vivo antibacterial performance as compared to vancomycin. The reactive oxygen therapy based on OA-MnO₂ nanozyme cures the infected skin and promotes wound healing in mice, manifesting its potential use in skin and soft tissue infection.

V2C Nanosheets as Dual-Functional Antibacterial Agents

Antibiotic-resistant bacterial strains have been continuously increasing and becoming a supreme threat to public health globally. The nanoparticle-based photothermal treatment has emerged as a powerful tool to combat toxic bacteria. Photothermal agents (PTAs) with cost-effective and high photothermal conversion efficiency are highly desirable. Herein, we unite the green process for delamination of V2AlC to produce a high yield mass of two-dimensional (2D) V2C nanosheets (NSs) by using algae extracts and demonstrate their high antibacterial efficiency. The resultant V2C NSs present decent structural reliability and intrinsic antibacterial ability. Powerful near-infrared (NIR) absorption and extraordinary photothermal conversion proficiency make it a good PTA for the photothermal treatment of bacteria. The antibacterial efficiency evaluation indicated that V2C NSs could effectively kill both Gram-positive S. aureus and Gram-negative E. coli. About 99.5% of both types of bacteria could be killed with low-dose of V2C NSs suspension (40 μg/mL) with 5 min NIR irradiation due to the intrinsic antibacterial ability and photothermal effect of V2C NSs, which is much higher than previous reports on Ta4C3, Ti3C2, MoSe2, and Nb2C. This work expands the application of MXene V2C NSs for rapid bacteria-killing and would gain promising attention for applications in the sterilization industry.

Photocatalytic and antibacterial activities of Tl–Hg–I nanocomposites: sonochemical synthesis and characterization

Efforts to find new and practical solutions to improve water quality and treatment of industrial effluents are ongoing. In this study, Tl₄HgI₆/HgI₂ nanocomposites were synthesized by a rapid ultrasonic method to investigate their photocatalytic and antibacterial activity. Various synthesis conditions such as changes in the ratio of precursors, use of surfactants, and changes in the power and time of sonication to achieve particles with optimal size and morphology were performed. X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) analysis confirmed the purity and formation of the nanocomposite. Optimal nanoparticles in terms of size and morphology were selected by examining the images obtained from scanning electron microscopy (SEM) analysis. The nanocomposites obtained in the presence of PVP (polyvinylpyrrolidone) as a surfactant (sample no. 8) were selected as the optimal sample. Transmission electron microscopy (TEM), differential reflectance spectroscopy (DRS), Raman, N₂ adsorption/desorption analyzes were performed for the optimal sample to evaluate the properties of nanocomposites. The band-gap for Tl₄HgI₆/HgI₂ nanocomposites was calculated to be about 2.3 eV for HgI₂ and 3.1 eV for Tl₄HgI₆. The optimal sample was used to evaluate the photocatalytic activity for decolorizing an aqueous solution of six different organic dyes. Finally, for rhodamine B, the decolorization was about 80%. Also, Tl₄HgI₆/HgI₂ nanocomposite showed a significant inhibition zone in the antibacterial test. The maximum inhibition diameter of 50 mm was obtained against Streptococcus pyogenes. The results showed that Tl₄HgI₆/HgI₂ nanocomposites have good potential for many industrial applications.

In this work, Tl₄HgI₆/HgI₂ nanocomposites were synthesized by a rapid ultrasonic method. The photocatalytic properties of the nanocomposites were evaluated for the first time. Photocatalytic properties were performed for six industrial dyes.