Perspectives on Nickel Hydroxide Electrodes Suitable for Rechargeable Batteries: Electrolytic vs. Chemical Synthesis Routes

Processing and Characterization of Spent Nickel-Metal Hydride Type AA Batteries to Recover Valuable Materials (Cobalt, Nickel and Rare Earth Elements)

The experimental research was focused on the investigation of valuable material from spent Ni-MH type AA batteries, namely the metal grid anodes and the black mass material (anode and cathode powder). The materials of interest were analyzed by X-ray fluorescence spectroscopy (XRF), ICP-OES (inductively coupled plasma optical emission spectrometry), optical microscopy, scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), electron backscatter diffraction (EBSD), and X-ray diffraction (XRD). The analyzed grids have a high Fe content, but some of them correspond to the Invar alloy with approx. 40% Ni. In the black mass material, round particles and large aggregations were observed by SEM analysis, showing a high degree of degradation. The XRD analysis reveals the presence of only three compounds or phases that crystallize in the hexagonal system: La0.52Ce0.33Pr0.04Nd0.11Co0.6Ni4.4, Ni(OH)2, and La5Ni19. The obtained results provide useful and interesting information that can be used for further research in the recycling and economic assessment of metals from spent Ni-MH batteries.

Commercially Accessible High-Performance Aluminum-Air Battery Cathodes through Electrodeposition of Mn and Ni Species on Fuel Cell Cathodes

This study presents a cost-effective method for producing high-performance cathodes for aluminum-air batteries. Commercial fuel cell cathodes are modified through electrodeposition of nickel and manganese species. The optimal conditions for electrodeposition are determined using a combination of structural (Raman, SEM, TEM) and electrochemical (LSV, EI, discharge curves) characterization techniques. The structural analysis confirms successful incorporation of nickel and manganese species onto the cathode surface. Electrochemical tests demonstrate enhanced electrochemical activity compared to unmodified cathodes. By combining the favorable properties of electrodeposited manganese species with nickel species, a high-performance cathode is obtained. The developed cathode exhibits capacities of 50 mA h cm-2 in aluminum-air batteries across a wide range of current densities. The electrodeposition method proves effective in improving electrochemical performance. A key advantage of this method is its simplicity and cost-effectiveness. The use of commercially available materials and well-established electrodeposition techniques allows for easy scalability and commercialization. This makes it a viable option for large-scale production of high-performance cathodes for the next-generation energy storage devices.

Selective Electrochemical Degradation of Lignosulfonate to Bio-Based Aldehydes

A sustainable electrochemical pathway for degradation and thermal treatment of technical lignosulfonate is presented. This approach is an opportunity to produce remarkable quantities of low molecular weight compounds, such as vanillin and acetovanillone. For the electrochemical degradation, a simple two-electrode arrangement in aqueous media is used, which is also easily scalable. The oxidation of the biopolymer occurs at the anode whereas hydrogen is evolved at the cathode. The subsequent thermal treatment supports the degradation of the robust chemical structure of lignosulfonates. With optimized electrolytic conditions, vanillin could be obtained in 9.7 wt% relative to the dry mass of lignosulfonate used. Aside from vanillin, by-products such as acetovanillone or vanillic acid were observed in lower yields. A new and reliable one-pot, two-step degradation of different technically relevant lignosulfonates is established with the advantages of using electrons as an oxidizing agent, which results in low quantities of reagent waste.

Enlightening the bimetallic effect of Au@Pd nanoparticles on Ni oxide nanostructures with enhanced catalytic activity

Bimetallic decoration of semiconductor electrodes typically improves catalytic and sensing performances because of a well-claimed synergistic effect. A microscopic and quantitative investigation of such an effect on energy bands of semiconductor can be really useful for further exploitation. Au, Pd and Au@Pd (core@shell) nanoparticles (10-20 nm in size) were synthesized through chemical reduction method and characterized with scanning and transmission microscopy, Rutherford backscattering spectrometry, cyclic voltammetry electrochemical impedance spectroscopy and Mott-Schottky analysis. The nanoparticles have been used to decorate Ni-based nanostructured electrodes with the aim to quantitatively investigate the effect of decoration with mono or bimetallic nanoparticles. Decorated electrodes show higher redox currents than bare ones and a shift in redox peaks (up to 0.3 V), which can be ascribed to a more efficient electron transport and improved catalytic properties. These effects were satisfactorily modeled (COMSOL) employing a nano Schottky junction at the nanoparticle-semiconductor interface, pointing out large energy band bending (up to 0.4 eV), space charge region and local electric field (up to [Formula: see text]) in bimetallic decoration. Sensing test of glucose and H₂O₂ by decorated Ni oxide electrodes were performed to consolidate our model. The presence of bimetallic nanoparticles enhances enormously the electrochemical performances of the material in terms of sensitivity, catalytic activity, and electrical transport. The modification of energy band diagram in semiconductor is analyzed and discussed also in terms of electron transfer during redox reactions.

Shape Evolution of Precipitate Membranes in Flow Systems

Chemical gardens are macroscopic structures that form when a salt seed is submerged in an alkaline solution. Their thin precipitate membranes separate the reactant partners and slow down the approach toward equilibrium. During this stage, a gradual thickening occurs, which is driven by steep cross-membrane gradients and governed by selective ion transport. We study these growth dynamics in microfluidic channels for the case of Ni(OH)₂ membranes. Fast flowing reactant solutions create thickening membranes of a nearly constant width along the channel, whereas slow flows produce wedge-shaped structures that fail to grow along their downstream end. The overall dynamics and shapes are caused by the competition of reactant consumption and transport replenishment. They are reproduced quantitatively by a two-variable reaction-diffusion-advection model which provides kinetic insights into the growth of precipitate membranes.

Applications of Nanomaterials and Nanotechnology in Energy Storage Device

Nanomaterials and nanotechnology have played central roles in the realization of high-efficiency and next-generation energy storage devices [...].

Facile and Rapid Electrochemical Conversion of Ni into Ni(OH)2 Thin Film as the Catalyst for Direct Growth of Carbon Nanotubes on Ni Foam for Supercapacitors

In this paper, a facile and rapid aqueous-based electrochemical technique was used for the phase conversion of Ni into Ni(OH)₂ thin film. The Ni(OH)₂ thin film was directly converted and coated onto the network surface of Ni foam (NF) via the self-hydroxylation process under alkaline conditions using a simple cyclic voltammetry (CV) strategy. The as-formed and coated Ni(OH)₂ thin film on the NF was used as the catalyst layer for the direct growth of carbon nanotubes (CNTs). The self-converted Ni(OH)₂ thin film is a good catalytic layer for the growth of CNTs due to the fact that the OH^- of the Ni(OH)₂ can be reduced to H₂O to promote the growth of CNTs during the CVD process, and therefore enabling the dense and uniform CNTs growth on the NF substrate. This binder-free CNTs/NF electrode displayed outstanding behavior as an electric double-layer capacitor (EDLC) due to the large surface area of the CNTs, showing excellent specific capacitance values of 737.4 mF cm^-2 in the three-electrode configuration and 319.1 mF cm^-2 in the two-electrode configuration, at the current density of 1 mA cm^-2 in a 6 M KOH electrolyte. The CNTs/NF electrode also displayed good cycling stability, with a capacitance retention of 96.41% after 10,000 cycles, and this the excellent cycling performance can be attributed to the stable structure of the direct growth of CNTs with a strong attachment to the NF current collector, ensuring a good mechanical and electrical connection between the NF collector and the CNTs.

Thermodynamic Descriptors to Predict Oxide Formation in Aqueous Solutions

We formulate the maximum driving force (MDF) parameter as a descriptor to capture the thermodynamic stability of aqueous surface scale creation over a range of environmental conditions. We use free energies of formation, Δ_fG's, sourced from high-throughput density functional theory (DFT) calculations and experimental databases to compute the maximum driving force for a range of materials, including oxides and hydroxides of varying compositions. We show how to use the MDF to describe trends in the aqueous corrosion of nickel thin films determined from experimental linear sweep voltammetry data. We also show how to account for subsurface oxidation behavior using depth-dependent effective chemical potentials. We anticipate this approach will increase the overall understanding of oxide formation on chemically complex multielement alloys, where competing oxide phases can form during transient aqueous corrosion.

Nickel hydroxide/sulfide hybrids: halide ion controlled synthesis, structural characteristics, and electrochemical performance

Focusing on the synthesis of nickel-based materials (such as nickel sulfides, nickel hydroxides, and nickel oxides) is an urgent need in the fields of batteries, supercapacitors, and catalysis. However, their controlled synthesis still remains a great challenge because of the inadequate understanding of the control factor of their synthesis. A two-step solvo-/hydrothermal process with halide ion embedding/releasing was proposed to understand the effect of the halide ions on the synthesis and sulfidation of nickel hydroxy-halides. We find that the halide ions determine the formation, growth, and evolution of nickel hydroxy halides and promote them to form unique architectures and morphologies, leading to obvious differences in structural characteristics, including conductivity and electrochemical activity. Because of the presence of halide ions, a series of hybrids with multiple interfaces, which consist of hydroxides and sulfides and have various morphologies, such as flower-like balls, solid balls, porous balls, schistose, and thorny balls, with capacities ranging from 100.7 to 261.2 mA h g^-1, can be easily obtained. It is fully demonstrated that the halide anion plays a core role in the synthesis process of nickel-based materials, and this finding will provide more chances for controllably synthesizing high-activity electrode materials.

Laser-induced breakdown spectroscopy to obtain quantitative three-dimensional hydrogen mapping in a nickel–metal-hydride battery cathode for interpreting its reaction distribution

A three-dimensional quantitative hydrogen distribution and state-of-charge distribution in a Ni–MH battery cathode can be acquired using laser-induced breakdown spectroscopy.

Potential Application of Ionic Liquids for Electrodeposition of the Material Targets for Production of Diagnostic Radioisotopes

An overview of the reported electrochemistry studies on the chemistry of the element for targets for isotope production in ionic liquids (ILs) is provided. The majority of investigations have been dedicated to two aspects of the reactive element chemistry. The first part of this review presents description of the cyclotron targets properties, especially physicochemical characterization of irradiated elements. The second part is devoted to description of the electrodeposition procedures leading to obtain elements or their alloys coatings (e.g., nickel, uranium) as the targets for cyclotron and reactor generation of the radioisotopes. This review provides an evaluation of the role ILs can have in the production of isotopes.