A β-cyclodextrin Modified Graphitic Carbon Nitride with Au Co-Catalyst for Efficient Photocatalytic Hydrogen Peroxide Production

Enhanced Visible-Light H2O2 Production over Pt/g-C3N4 Schottky Junction Photocatalyst

Photocatalytic for hydrogen peroxide (H2O2) production is thought as a promising technology owing to its clean and green properties with the cheap and easily available raw materials of H2O and O2. Herein, Pt/g-C3N4 Schottky junction photocatalysts with ultralow Pt contents (0.025-0.1 wt %) were successfully fabricated by an impregnation-reduction method. It can efficiently reduce O2 to generate H2O2 without a sacrificial agent under visible-light irradiation. The yield of H2O2 produced over Pt0.05/g-C3N4 with the optimal 0.05 wt % Pt reached 31.82 μM, which was 2.46 times that of g-C3N4 and higher than most of those in the literature. It also showed good stability in three repeated tests. The deposition of highly dispersed metal Pt nanoparticles with low and limited content can expose enough active Pt atoms, significantly enhance the separation efficiency of photogenerated carriers, and reduce its negative effect on H2O2 decomposition, resulting in improved and outstanding efficiency of H2O2 production. The ·O2- radicals were found to be the main active species. The mechanism of photocatalytic H2O2 production was confirmed to be a two-step single electron route (O2 + e-→ ·O2- → H2O2).

Recent progress in the design of photocatalytic H2O2 synthesis system

Photocatalytic synthesis of hydrogen peroxide under mild reaction conditions is a promising technology. This article will review the recent research progress in the design of photocatalytic H2O2 synthesis systems. A comprehensive discussion of the strategies that could solve two essential issues related to H2O2 synthesis. That is, how to improve the reaction kinetics of H2O2 formation via 2e- oxygen reduction reaction and inhibit the H2O2 decomposition through a variety of surface functionalization methods. The photocatalyst design and the reaction mechanism will be especially stressed in this work which will be concluded with an outlook to show the possible ways for synthesizing high-concentration H2O2 solution in the future.

Copper(II)-β-cyclodextrin immobilized on graphitic carbon nitride nanosheets as a highly effective catalyst for tandem oxidative amidation of benzylic alcohols

In this study, an efficient catalyst based on graphitic carbon nitride nanosheets (CN) and copper(II) supported β-cyclodextrin (β-CD/Cu(II)) was synthesized and used for tandem oxidative amidation of benzylic alcohols. In this regard, CN was functionalized by β-CD/Cu(II) via 1,3-dibromopropane linker (CN-Pr-β-CD/Cu(II)). The prepared catalyst was characterized using FT-IR, XRD, FE-SEM, EDS, TGA, ICP-OES, BET, and TEM analyses. CN-Pr-β-CD/Cu(II) was subsequently applied in a direct oxidative amidation reaction and it was observed that different benzyl alcohols were converted to desire amides with good to excellent efficiency. This reaction was performed in the presence of amine hydrochloride salts, tert-butyl hydroperoxide (TBHP), and Ca2CO3 in acetonitrile (CH3CN) under nitrogen atmosphere. CN-Pr-β-CD/Cu(II) can be recycled and reused five times without significant reduction in reaction efficiency.

Fabrication of electrochemical immunosensor based on GCN-β-CD/Au nanocomposite for the monitoring of vitamin D deficiency

Serum 25-hydroxyvitamin D (25(OH)D) has been clinically considered as a novel biomarker for vitamin D deficiency. The current standard technologies for the detection of 25(OH)D are performed in sophisticated laboratories exhibiting the practical limitations for onsite and affordable testing. Therefore, the development of a cost-effective device for Vitamin D is extremely necessary to provide an earlier diagnosis. Herein, for the first time, we propose a novel label-free impedimetric immunosensor for the detection and quantification of 25-hydroxyvitamin D3 (25(OH)D3) biomarker in serum samples based on the Au nanoparticles functionalized GCN-β-CD nanocomposite. To fabricate the sensing probe, Ab-25(OH)D3 antibodies were covalently immobilized on GCN-β-CD@Au/GCE using carbodiimide chemistry. The surface morphology and structural properties of constructed immunosensor were confirmed by different analytical techniques. Electrochemical impedance spectroscopy technique (EIS) has been selected as the main detection method to measure the Antibody (Ab) and Antigen (Ag) interaction at the immunosensor surface because it is label-free, less destructive to the activities of the biomolecule, and highly sensitive. The as-prepared immunosensor exhibited an excellent concentration range from 0.1 ng/ml to 500 ng/ml with the lowest limit of detection of 0.01 ng/ml. Furthermore, the sensing probe was validated in serum samples and obtained results were compared with the standard CLIA technique. The results have revealed that the sensing probe could be used for clinical diagnosis of Vitamin D deficiency in the clinical laboratories.

Size controlled silver nanoparticles on β-cyclodextrin/graphitic carbon nitride: an excellent nanohybrid material for SERS and catalytic applications

A nanohybrid (NH), having high dispersion of silver nanoparticles (AgNPs) on β-cyclodextrin (β-CD)/graphitic carbon nitride (g-CN), designated as AgNPs/β-CD/g-CN-NH, was synthesized and characterized. It was exploited for a couple of environmental remediation applications like SERS sensing and catalytic reduction of specific organic pollutants in water. It showed excellent SERS activity as a Raman probe for the detection of malachite green (MG). Its enhancement factor (EF) and detection limit for MG were equal to 7.26 × 10⁶ and 1 × 10^-9 M, respectively. The relative standard deviation (RSD) was equal to 3.8% which indicates high homogeneity of AgNP dispersion and signal reproducibility of the SERS substrate. The NH displayed high catalytic activity for the reduction of eosin yellow (EY) in the presence of NaBH₄ with the rate constant (k) of 0.1142 min^-1. A comparison of the present NH with other reported materials reveals better SERS and catalytic activities of the former than those of the latter. The SERS activity of the NH was also examined for sensing of other triphenylamine dyes like methyl violet (MV), and it was successful. The same NH also exhibited high catalytic activity towards the reduction of Congo red (CR). The results of both studies clarify that the NH is an excellent SERS substrate and efficient catalyst for the detection of organic environmental pollutants having structures similar to MG and their degradation. This is due to the distribution of the controlled size of AgNPs on g-CN promoted by β-CD. Therefore, we focus our attention on future environmental applications of the nanohybrid as a very cheap SERS substrate and a very active catalyst.