Photosensitive Thin Films Based on Drop Cast and Langmuir-Blodgett Hydrophilic and Hydrophobic CdS Nanoparticles

Green composites based on volcanic red algae Cyanidiales, cellulose, and coffee waste biomass modified with magnetic nanoparticles for the removal of methylene blue

In this paper, green nanocomposites based on biomass and superparamagnetic nanoparticles were synthesized and used as adsorbents to remove methylene blue (MB) from water with magnetic separation. The adsorbents were synthesized through the wet co-precipitation technique, in which iron-oxide nanoparticles coated the cores based on coffee, cellulose, and red volcanic algae waste. The procedure resulted in materials that could be easily separated from aqueous solutions with magnets. The morphology and chemical composition of the nanocomposites were characterized by SEM, FT-IR, and XPS methods. The adsorption studies of MB removal with UV-vis spectrometry showed that the adsorption performance of the prepared materials strongly depended on their morphology and the type of the organic adsorbent. The adsorption studies presented the highest effectiveness in neutral pH with only a slight effect on ionic strength. The MB removal undergoes pseudo-second kinetics for all adsorbents. The maximal adsorption capacity for the coffee@Fe₃O₄-2, cellulose@Fe₃O₄-1, and algae@Fe₃O₄-1 is 38.23 mg g^-1, 41.61 mg g^-1, and 48.41 mg g^-1, respectively. The mechanism of MB adsorption follows the Langmuir model using coffee@Fe₃O₄ and cellulose@Fe₃O₄, while for algae@Fe₃O₄ the process fits to the Redlich-Peterson model. The removal efficiency analysis based on UV-vis adsorption spectra revealed that the adsorption effectiveness of the nanocomposites increased as follows: coffee@Fe₃O₄-2 > cellulose@Fe₃O₄-1 > algae@Fe₃O₄-1, demonstrating an MB removal efficiency of up to 90%.

Influence of Potassium Ions on Act of Amphotericin B to the DPPC/Chol Mixed Monolayer at Different Surface Pressures

Amphotericin B (AmB) is an antifungal drug that rarely develops resistance. It has an affinity with the cholesterol on mammalian cell membranes, disrupting the structure and function of the membranes, which are also affected by potassium ions. However, the mechanism is unclear. In this paper, the Langmuir monolayer method was used to study the effects of potassium ions on the surface pressure–mean molecular area of isotherms, elastic modulus and the surface pressure–time curves of a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/cholesterol (DPPC/Chol) monolayer and a DPPC/Chol/AmB monolayer. The morphology and thickness of the Langmuir–Blodgett films were studied via atomic force microscopy. The results showed that AmB can increase the mean molecular area of the DPPC/Chol mixed monolayer at low pressures (15 mN/m) but reduces it at high pressures (30 mN/m). The potassium ions may interfere with the effect of AmB in different ways. The potassium ions can enhance the influence of AmB on the stability of monolayer at low surface pressures, but weaken it at high surface pressures. The potassium ions showed significant interference with the interaction between AmB and the cholesterol-enriched region. The results are helpful for us to understand how the effect of amphotericin B on the phospholipid membrane is interfered with by potassium ions when amphotericin B enters mammalian cell membrane.

Interaction between polyene antifungal drug and saturated phospholipid monolayer regulated by calcium ions at the air-water interface

Amphotericin B (AmB) is a polyene antifungal drug, which could directly form pores on the sterol-free phospholipid monolayers. The interaction between AmB and phospholipid can be affected by calcium ions, but the mechanism is still unclear. DPPC is a saturated phospholipid with -PC group, which is often used to simulate the outer cell membrane leaflet. And DPPC is also the main constituent of pulmonary surfactants. In this work, the DPPC monolayer was used as a model membrane to study the effect of calcium ions on the interaction between AmB and phospholipid. The influence of different concentration of calcium ions on the elastic modulus, mean molecular area increment, excess Gibbs free energy and stability of the AmB/DPPC mixed monolayer has been researched at the surface pressure of 7.5 mN/m, 12.5 mN/m and 22.5 mN/m. The AmB/DPPC monolayers at the air-water interface have been observed in real-time by Brewster angle microscope and the microstructure of the Langmuir-Blodgett monolayer films transferred onto the mica have been researched by scanning electron microscope and atomic force microscope. The results showed that calcium ions had a significant influence on the elastic modulus, mean molecular area increment, excess Gibbs free energy, stability and microstructure of the AmB/DPPC monolayer. It has been indicated that the influence of calcium ions on the interaction between AmB and DPPC molecules mainly depended on the effect of calcium ions on the orientation of AmB molecules. The calcium ions could regulate the effect of AmB to the stability of the DPPC monolayer. This regulatory role changed with the different concentrations of calcium ions and the different phase states of the monolayer. This work provides useful information to further understand the influence mechanism of calcium ions on the interaction between AmB and saturated phospholipid with -PC group, which is helpful to find out the effect mechanism of calcium ion on the interaction between AmB and the outer layer of cell membrane or pulmonary surfactants in different phase states and to understand the toxicity mechanism of AmB on the cell membrane or lungs.