Fe3O4@C Nanoparticles Synthesized by In Situ Solid-Phase Method for Removal of Methylene Blue

Synthesis of magnetic MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbons derived from Bidens pilosa weed and their adsorptive comparison of toxic dyes

Bidens pilosa is classified as an invasive plant and has become a problematic weed to many agricultural crops. This species strongly germinates, grows and reproduces and competing for nutrients with local plants. To lessen the influence of Bidens pilosa, therefore, converting this harmful species into carbon materials as adsorbents in harm-to-wealth and valorization strategies is required. Here, we synthesized a series of magnetic composites based on MFe2O4 (M = Ni, Co, Zn, Fe) supported on porous carbon (MFOAC) derived from Bidens pilosa by a facile hydrothermal method. The Bidens pilosa carbon was initially activated by condensed H3PO4 to increase the surface chemistry. We observed that porous carbon loaded NiFe2O4 (NFOAC) reached the highest surface area (795.7 m2 g-1), followed by CoFe2O4/AC (449.1 m2 g-1), Fe3O4/AC (426.1 m2 g-1), ZnFe2O4/AC (409.5 m2 g-1). Morphological results showed nanoparticles were well-dispersed on the surface of carbon. RhB, MO, and MR dyes were used as adsorbate to test the adsorption by MFOAC. Effect of time (0-360 min), concentration (5-50 mg L-1), dosage (0.05-0.2 g L-1), and pH (3-9) on dyes adsorption onto MFOAC was investigated. It was found that NFOAC obtained the highest maximum adsorption capacity against dyes, RhB (107.96 mg g-1) < MO (148.05 mg g-1) < MR (153.1 mg g-1). Several mechanisms such as H bonding, π-π stacking, cation-π interaction, and electrostatic interaction were suggested. With sufficient stability and capacity, NFOAC can be used as potential adsorbent for real water treatment systems.

Bionanocomposite based on immobilization of Burkholderia cepacian on GO/MOF and its removal of malachite green from river water

Bio-nanocomposites have attracted increasing research attention because they are able to integrate bio- and nano-related functions, and subsequently demonstrate potentially beneficial environmental applications. Here, a functional bionanomaterial based on Burkholderia cepacian (FZ) immobilized on GO/ZIF-8 was developed and used to remove malachite green (MG), with functions based on both biodegradation and adsorption. XRD and FTIR results showed that in situ production of GO/ZIF-8 by combining Zn2+ in ZIF-8 with the carboxyl group on the GO surface, led to FZ immobilized in GO/ZIF-8 through covalent bonding. Zeta analysis showed that the surface of FZ and GO/ZIF-8 had different charges under pH = 9.12, suggesting immobilization also occurred via electrostatic action. BET results confirmed that the specific surface area of GO/ZIF-8 was much larger than that of GO and ZIF-8, but the reduced specific surface area of FZ@GO/ZIF-8 could be due to FZ loading on its surface. The efficiency of FZ@GO/ZIF-8 in the removal of MG reached 99% and furthermore retained good stability after five cycles. The efficiency in removing multiple ions in river water reached more than 80%, which is evidence strongly suggesting that FZ@GO/ZIF-8 is an environmental bionanomaterial with effective application potential.

Influence of Potassium-Based Activation on Adsorptive Properties of Carbon Spheres Modified with Iron(III) Citrate

Composites synthesized from iron(III) citrate and carbon spheres, and activated with potassium compounds were prepared and then characterized using XRD, SEM, and low-temperature nitrogen adsorption methods. The adsorption properties of the composites toward carbon dioxide were assessed using CO2 uptake measurement, as well as by measuring their selectivity toward carbon dioxide, given their further application as photocatalysts for the reduction of this gas. The effect of changing preparation conditions on the structural and adsorption properties of the material was assessed. The potential strength of such material is a synergistic effect between the high adsorption capacity related to the microporosity of carbon spheres combined with the catalytic properties of iron particles.

Fe3O4@C@MCM41-guanidine core-shell nanostructures as a powerful and recyclable nanocatalyst with high performance for synthesis of Knoevenagel reaction

In this study, preparation, characterization and catalytic application of a novel core-shell structured magnetic with carbon and mesoporous silica shells supported guanidine (Fe₃O₄@C@MCM41-guanidine) are developed. The Fe₃O₄@C@MCM41-guanidine was prepared via surfactant directed hydrolysis and condensation of tetraethyl orthosilicate around Fe₃O₄@C NPs followed by treatment with guanidinium chloride. This nanocomposite was characterized by using Fourier transform infrared spectroscopy, vibrating sample magnetometry, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, thermal gravimetric analysis, wide-angle X-ray diffraction and low-angle X-ray diffraction techniques. This nanocomposite have high thermal, chemical stability, and uniform size. Fe₃O₄@C@MCM41-guanidine catalyst demonstrated high yield (91-98%) to prepare of Knoevenagel derivatives under the solvent free conditions at room temperature in the shortest time. Also, this catalyst was recovered and reused 10 times without significant decrease in efficiency and stability. Fortunately, an excellent level of yield (98-82%) was observed in the 10 consecutive catalyst cycles.

Green synthesis, characterization, and application of Fe3O4 nanoparticles for methylene blue removal: RSM optimization, kinetic, isothermal studies, and molecular simulation

Methylene Blue (MB) is a cationic dye causing various health problems such as asthma, heartbeat, eye and skin irritation, nausea, and distress during prolonged exposure. In this regard, the green magnetite nanoparticle was synthesized using the extract of Prosopis farcta. The synthesized Fe₃O₄nanoparticle was characterized by X-ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), Fourier transforms Infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), and Brunauer-Emmett-Teller (BET). The corresponding parameters, including the primary concentration of MB (5-65 mg/L), the dose of synthesized nanoparticle (0.025-0.925 g/L), solution pH (3-11), and contact time (20-60 min), were considered. Also, central composite design (CCD), as one of the response surface methodologies (RSM), was used for the related modelling and optimization. The particle size of the adsorbent was between 5 and 70 nm, and the nanoparticle has 206.75 m²/g of a specific surface, 6.1 nm of average pore size, and 0.3188 cm³/g of the total pore volume. The optimal conditions for MB removal by the nanoparticle were found to follow an initial MB concentration of 20 mg/L, 0.7 g/L of the nanoparticle dose, pH = 9, and a contact time of 50 min. The pseudo-second-order (PSO) and Freundlich models were the best kinetic and isothermal models for MB removal by the synthesized nanoparticle. Molecular modelling was used to optimize the MB molecular configuration and compute HOMO-LUMO energies, quantum-chemical descriptors, and molecular electrostatic potential to evaluate the nature reactivity of the MB molecule.

The Effect of Lithium Ion Leaching from Calcined Li-Al Hydrotalcite on the Rapid Removal of Ni2+/Cu2+ from Contaminated Aqueous Solutions

A layered double hydroxide (LDH) calcined-framework adsorbent was investigated for the rapid removal of heavy metal cations from plating wastewater. Li-Al-CO₃ LDH was synthesized on an aluminum lathe waste frame surface to prepare the sorbent. The calcination treatment modified the LDH surface properties, such as the hydrophilicity and the surface pH. The change in surface functional groups and the leaching of lithium ions affected the surface properties and the adsorption capacity of the heavy metal cations. A zeta potential analysis confirmed that the 400 °C calcination changed the LDH surface from positively charged (+10 mV) to negatively charged (-17 mV). This negatively charged surface contributed to the sorbent instantly bonding with heavy metal cations in large quantities, as occurs during contact with wastewater. The adsorption isotherms could be fitted using the Freundlich model. The pseudo-second-order model and the rate-controlled liquid-film diffusion model successfully simulated the adsorption kinetics, suggesting that the critical adsorption step was a heterogeneous surface reaction. This study also confirmed that the recovered nickel and/or copper species could be converted into supported metal nanoparticles with a high-temperature hydrogen reduction treatment, which could be reused as catalysts.

The Photocatalytic Activity of CaTiO3 Derived from the Microwave-Melting Heating Process of Blast Furnace Slag

The extraction of titanium-bearing components in the form of CaTiO₃ is an efficient utilization of blast furnace slag. The photocatalytic performance of this obtained CaTiO₃ (MM-CaTiO₃) as a catalyst for methylene blue (MB) degradation was evaluated in this study. The analyses indicated that the MM-CaTiO₃ had a completed structure with a special length-diameter ratio. Furthermore, the oxygen vacancy was easier to generate on a MM-CaTiO₃(110) plane during the photocatalytic process, contributing to improving photocatalytic activity. Compared with traditional catalysts, MM-CaTiO₃ has a narrower optical band gap and visible-light responsive performance. The degradation experiments further confirmed that the photocatalytic degradation efficiency of pollutants by using MM-CaTiO₃ was 3.2 times that of pristine CaTiO₃ in optimized conditions. Combined with molecular simulation, the degradation mechanism clarified that acridine of MB molecular was stepwise destroyed by using MM-CaTiO₃ in short times, which is different from demethylation and methylenedioxy ring degradation by using TiO₂. This study provided a promising routine for using solid waste to obtain catalysts with excellent photocatalytic activity and was found to be in keeping with sustainable environmental development.

Nanostructured Materials and Advanced Processes for Application in Water Purification

Water pollution is a major environmental problem that has a significant impact on human and animal health and the ecosystem [...].

Core-Shell Fe3O4@C Nanoparticles for the Organic Dye Adsorption and Targeted Magneto-Mechanical Destruction of Ehrlich Ascites Carcinoma Cells

The morphology, structure, and magnetic properties of Fe₃O₄ and Fe₃O₄@C nanoparticles, as well their effectiveness for organic dye adsorption and targeted destruction of carcinoma cells, were studied. The nanoparticles exhibited a high magnetic saturation value (79.4 and 63.8 emu/g, correspondingly) to facilitate magnetic separation. It has been shown that surface properties play a key role in the adsorption process. Both types of organic dyes-cationic (Rhodomine C) and anionic (Congo Red and Eosine)-were well adsorbed by the Fe₃O₄ nanoparticles' surface, and the adsorption process was described by the polymolecular adsorption model with a maximum adsorption capacity of 58, 22, and 14 mg/g for Congo Red, Eosine, and Rhodomine C, correspondingly. In this case, the kinetic data were described well by the pseudo-first-order model. Carbon-coated particles selectively adsorbed only cationic dyes, and the adsorption process for Methylene Blue was described by the Freundlich model, with a maximum adsorption capacity of 14 mg/g. For the case of Rhodomine C, the adsorption isotherm has a polymolecular character with a maximum adsorption capacity of 34 mg/g. To realize the targeted destruction of the carcinoma cells, the Fe₃O₄@C nanoparticles were functionalized with aptamers, and an experiment on the Ehrlich ascetic carcinoma cells' destruction was carried out successively using a low-frequency alternating magnetic field. The number of cells destroyed as a result of their interaction with Fe₃O₄@C nanoparticles in an alternating magnetic field was 27%, compared with the number of naturally dead control cells of 6%.

A Generalized Method for the Synthesis of Carbon-Encapsulated Fe3O4 Composites and Its Application in Water Treatment

In this paper, a simple and environmentally friendly method was developed for the preparation of highly stable C@Fe₃O₄ composites with controllable morphologies using sodium alginate as the carbon source and the easily obtained α-Fe₂O₃ as the precursors. The morphologies of the as-prepared C@Fe₃O₄ composites, inherited from their corresponding precursors of α-Fe₂O₃, survived from the annealing treatments, were characterized by the field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The C@Fe₃O₄ composites resisted to oxidation, acidification and aggregation, exhibiting porous structures and ferromagnetic properties at room temperature. Moreover, the adsorption performance of the C@Fe₃O₄ composites was evaluated by absorbing MB (methylene blue) in liquid environment. Experiments indicated that the C@Fe₃O₄ composites exhibited highly enhanced adsorption capacities and efficiencies as compared with their corresponding precursors of α-Fe₂O₃. This generalized method for the synthesis of C@Fe₃O₄ composites provides promising applications for the highly efficient removal of MB from industrial effluents.

Carbon Double Coated Fe3O4@C@C Nanoparticles: Morphology Features, Magnetic Properties, Dye Adsorption

This work is devoted to the study of magnetic Fe₃O₄ nanoparticles doubly coated with carbon. First, Fe₃O₄@C nanoparticles were synthesized by thermal decomposition. Then these synthesized nanoparticles, 20–30 nm in size were processed in a solution of glucose at 200 °C during 12 h. The morphology and features of the magnetic properties of the obtained hybrid nanoparticles were characterized by transmission electron microscopy, differential thermo-gravimetric analysis, vibrating sample magnetometer, magnetic circular dichroism and Mössbauer spectroscopy. It was shown that the magnetic core of Fe₃O₄@C nanoparticles was nano-crystalline, corresponding to the Fe₃O₄ phase. The Fe₃O₄@C@C nanoparticles presumably contain Fe₃O₄ phase (80%) with admixture of maghemite (20%), the thickness of the carbon shell in the first case was of about 2–4 nm. The formation of very large nanoparticle conglomerates with a linear size up to 300 nm and of the same regular shape is a remarkable peculiarity of the Fe₃O₄@C@C nanoparticles. Adsorption of organic dyes from water by the studied nanoparticles was also studied. The best candidates for the removal of dyes were Fe₃O₄@C@C nanoparticles. The kinetic data showed that the adsorption processes were associated with the pseudo-second order mechanism for cationic dye methylene blue (MB) and anionic dye Congo red (CR). The equilibrium data were more consistent with the Langmuir isotherm and were perfectly described by the Langmuir–Freundlich model.

Poly(catechol) modified Fe3O4 magnetic nanocomposites with continuous high Fenton activity for organic degradation at neutral pH

Fe3O4 magnetic nanoparticles (MNPs) have been widely used as a recyclable catalyst in Fenton reaction for organic degradation. However, the pristine MNPs suffer from the drawbacks of iron leaching in acidic conditions as well as the decreasing catalytic activity of organic degradation at a pH higher than 3.0. To solve the problems, Fe3O4 MNPs were modified by poly(catechol) (Fe3O4/PCC MNPs) using a facile chemical co-precipitation method. The poly(catechol) modification improved both the dispersity and the surface negative charges of Fe3O4/PCC MNPs, which are beneficial to the catalytic activity of MNPs for organic degradation. Moreover, the poly(catechol) modification enhanced the efficiency of Fe(II) regeneration during Fenton reaction due to the acceleration of Fe(III) reduction by the phenolic/quinonoid redox pair. As a result, the Fenton reaction with Fe3O4/PCC MNPs could efficiently degrade organic molecules, exampled by methylene blue (MB), in an expanded pH range between 3.0 and 10.0. In addition, Fe3O4/PCC MNPs could be reused up to 8 cycles for the MB degradation with negligible iron leaching of lower than 1.5 mg L-1. This study demonstrated Fe3O4/PCC MNPs are a promising heterogeneous Fenton catalysts for organic degradation.

Selective biosorption mechanism of methylene blue by a novel and reusable sugar beet pulp cellulose/sodium alginate/iron hydroxide composite hydrogel

A cellulose-based sodium alginate/iron hydroxide (C/SA/Fe) composite hydrogel was fabricated by using epichlorohydrin as cross-linking agent as an effective adsorbent for dye. The physicochemical structure of the C/SA/Fe hydrogel was characterized by SEM, FTIR, XRD and TG. The adsorption performance for the removal of methylene blue (MB) was investigated. In addition, the selective adsorption of cationic dye was also studied. The FTIR analysis revealed that the Fe(OH)₃ colloidal particles was successfully combined in the cellulose/sodium alginate hydrogel. The modified hydrogel had better adsorption performance, and the maximum adsorption capacity of C/SA/Fe0.5 for MB was 105.93 mg/g according to the fitting results of adsorption isotherm. The kinetic study showed that MB adsorption of C/SA/Fe was more consistent with the pseudo-second-order model, and the adsorption of MB in C/SA/Fe was dominated by chemisorption mechanism such as ion exchange or electron sharing. The adsorption data fits well with the Langmuir model. Thermodynamics analysis showed that the MB adsorption by C/SA/Fe was exothermic, spontaneous, favorable and feasible. After five adsorption-desorption cycles, the adsorption capacity was almost unchanged. So, the C/SA/Fe hydrogel is a potential material in the field of the recovery of agricultural by-products or other bio-based cellulose, or environmental protection, etc.

The in situ fabrication of ZIF-67 on titania-coated magnetic nanoparticles: a new platform for the immobilization of Pd(ii) with enhanced catalytic activity for organic transformations

The synthesis of a magnetic zeolitic-imidazolate-framework-67-supported Pd catalyst was demonstrated, and its catalytic activity for oxidation, reduction, and the oxidative deprotection of oximes was studied.