Preparation and Characterization of Electrospun Fluoro-Containing Poly(imide-benzoxazole) Nano-Fibrous Membranes with Low Dielectric Constants and High Thermal Stability

Dielectric Elastomer Actuators with Enhanced Durability by Introducing a Reservoir Layer

A Dielectric Elastomer Actuator (DEA) consists of electrodes with a dielectric layer between them. By controlling the design of the electrodes, voltage, and frequency, the operating range and speed of the DEA can be adjusted. These DEAs find applications in biomimetic robots, artificial muscles, and similar fields. When voltage is applied to the DEA, the dielectric layer undergoes compression and expansion due to electrostatic forces, which can lead to electrical breakdown. This phenomenon is closely related to the performance and lifespan of the DEA. To enhance stability and improve dielectric properties, a DEA Reservoir layer is introduced. Here, stability refers to the ability of the DEA to perform its functions even as the applied voltage increases. The Reservoir layer delays electrical breakdown and enhances stability due to its enhanced thickness. The proposed DEA in this paper is composed of a Reservoir layer and electrode layer. The Reservoir layer is placed between the electrode layers and is independently configured, not subjected to applied voltage like the electrode layers. The performance of the DEA was evaluated by varying the number of polymer layers in the Reservoir and electrode designs. Introducing the Reservoir layer improved the dielectric properties of the DEA and delayed electrical breakdown. Increasing the dielectric constant through the DEA Reservoir can enhance output characteristics in response to electrical signals. This approach can be utilized in various applications in wearable devices, artificial muscles, and other fields.

Design and synthesis of novel poly (aryl ether ketones) containing trifluoromethyl and trifluoromethoxy groups

The high-frequency and high-speed communication in the 5 G era puts forward requirements for the dielectric properties of polymers. Introducing fluorine into poly(ary ether ketone) can improve its dielectric properties. In this work, by introducing the fluorine group strategy, we successfully designed and synthesized three novel trifluoromethyl (-CF₃) or trifluoromethoxy (-OCF₃)-containing bisphenol monomers and their F-substitution PEK-based polymers (PEK-Ins). All these PEK-Ins exhibited good thermal, mechanical and dielectric properties. The T d5% of the three polymers is all higher than 520℃. The free volume fraction of novel polymers increased from 3.75% to 5.72%. Among the three polymers, exhibited the lowest dielectric constant of the films is 2.839, and the dielectric loss is 0.0048, ascribing to the increasing free volume. The Young's modulus of the polymer film is as high as 2.9 GPa and the tensile strength is as high as 84 MPa. PEK-Ins reduced the dielectric constant by introducing a low fluorine content. This study provides a new way to design PEK to synthesize low dielectric constant polymers.