Glucose Detection of 4-Mercaptophenylboronic Acid-Immobilized Gold-Silver Core-Shell Assembled Silica Nanostructure by Surface Enhanced Raman Scattering

A sensor platform based on SERS detection/janus textile for sweat glucose and lactate analysis toward portable monitoring of wellness status

Herein we report a wearable sweat sensor of a Janus fabric based on surface enhanced Raman scattering (SERS) technology, mainly detecting the two important metabolites glucose and lactate. Janus fabric is composed of electrospinning PU on a piece of medical gauze (cotton), working as the unidirectional moisture transport component (R = 1305%) to collect and transfer sweat efficiently. SERS tags with different structures act as the probe to recognize and detect the glucose and lactate in high sensitivity. Core-shell structured gold nanorods with DTNB inside (AuNRs@DTNB@Au) are used to detect lactate, while gold nanorods with MPBA (AuNRs@MPBA) are used to detect glucose. Through the characteristic SERS information, two calibration functions were established for the concentration determination of glucose and lactate. The concentrations of glucose and lactate in sweat of a 23 years volunteer during three-stage interval running are tested to be 95.5, 53.2, 30.5 μM and 4.9, 13.9, 10.8 mM, indicating the glucose (energy) consumption during exercise and the rapid accumulation of lactate at the early stage accompanied by the subsequent relief. As expected, this sensing system is able to provide a novel strategy for effective acquisition and rapid detection of essential biomarkers in sweat.

Development of a 3D Hydrogel SERS Chip for Noninvasive, Real-Time pH and Glucose Monitoring in Sweat

Traditional diagnostic methods, such as blood tests, are invasive and time-consuming, while sweat biomarkers offer a rapid physiological assessment. Surface-enhanced Raman spectroscopy (SERS) has garnered significant attention in sweat analysis because of its high sensitivity, label-free nature, and nondestructive properties. However, challenges related to substrate reproducibility and interference from the biological matrix persist with SERS. This study developed a novel ratio-based 3D hydrogel SERS chip, providing a noninvasive solution for real-time monitoring of pH and glucose levels in sweat. Encapsulating the probe molecule (4-MBN) in nanoscale gaps to form gold nanoflower-like nanotags with internal standards and integrating them into an agarose hydrogel to create a 3D flexible SERS substrate significantly enhances the reproducibility and stability of sweat analysis. Gap-Au nanopetals modified with probe molecules are uniformly dispersed throughout the porous hydrogel structure, facilitating the effective detection of the pH and glucose in sweat. The 3D hydrogel SERS chip demonstrates a strong linear relationship in pH and glucose detection, with a pH response range of 5.5-8.0 and a glucose detection range of 0.01-5 mM, with R2 values of 0.9973 and 0.9923, respectively. In actual sweat samples, the maximum error in pH detection accuracy is only 1.13%, with a lower glucose detection limit of 0.25 mM. This study suggests that the ratio-based 3D hydrogel SERS chip provides convenient, reliable, and rapid detection capabilities with substantial application potential for analyzing body fluid pH and glucose.

Preparation and exploration of anti-tumor activity of Poria cocos polysaccharide gold nanorods

With the continuous advancement of nanotechnology, the application of gold nanorods (AuNRs) functionalized with polysaccharides in the realm of cancer photothermal therapy is garnering increasing attention. To harness photothermal therapy for cancer treatment, FLP-MPBA-AuNRs were successfully synthesized in this study for the first time, utilizing Poria cocos polysaccharides (FLP), mercaptophenylboronic acid (MPBA), and gold nanorods (AuNRs). FLP-MPBA-AuNRs is a nanomaterial characterized by a unique rod-shaped structure, featuring a long diameter of 29.3 nm and a short diameter of 6.5 nm, which conferred upon it exceptional photothermal stability and remarkable photothermal conversion efficiency. Under near-infrared light irradiation, FLP-MPBA-AuNRs elicited significant photothermal effects, effectively curtailing the proliferation of various cancer cells. Additionally, it impeded cancer progression by inducing cell apoptosis and releasing reactive oxygen species (ROS). Furthermore, FLP-MPBA-AuNRs suppressed the metastasis and growth of cancer cells in zebrafish models. In summary, FLP-MPBA-AuNRs showcased immense potential in cancer therapy by inhibiting tumor cell growth through photothermal and photodynamic mechanisms.

Recent Studies on Metal-Embedded Silica Nanoparticles for Biological Applications

Recently, silica nanoparticles (NPs) have attracted considerable attention as biocompatible and stable templates for embedding noble metals. Noble-metal-embedded silica NPs utilize the exceptional optical properties of novel metals while overcoming the limitations of individual novel metal NPs. In addition, the structure of metal-embedded silica NPs decorated with small metal NPs around the silica core results in strong signal enhancement in localized surface plasmon resonance and surface-enhanced Raman scattering. This review summarizes recent studies on metal-embedded silica NPs, focusing on their unique designs and applications. The characteristics of the metal-embedded silica NPs depend on the type and structure of the embedded metals. Based on this progress, metal-embedded silica NPs are currently utilized in various spectroscopic applications, serving as nanozymes, detection and imaging probes, drug carriers, photothermal inducers, and bioactivation molecule screening identifiers. Owing to their versatile roles, metal-embedded silica NPs are expected to be applied in various fields, such as biology and medicine, in the future.

Non-Invasive Glucose Sensing Technologies and Products: A Comprehensive Review for Researchers and Clinicians

Diabetes Mellitus incidence and its negative outcomes have dramatically increased worldwide and are expected to further increase in the future due to a combination of environmental and social factors. Several methods of measuring glucose concentration in various body compartments have been described in the literature over the years. Continuous advances in technology open the road to novel measuring methods and innovative measurement sites. The aim of this comprehensive review is to report all the methods and products for non-invasive glucose measurement described in the literature over the past five years that have been tested on both human subjects/samples and tissue models. A literature review was performed in the MDPI database, with 243 articles reviewed and 124 included in a narrative summary. Different comparisons of techniques focused on the mechanism of action, measurement site, and machine learning application, outlining the main advantages and disadvantages described/expected so far. This review represents a comprehensive guide for clinicians and industrial designers to sum the most recent results in non-invasive glucose sensing techniques' research and production to aid the progress in this promising field.

Facile Synthesis of MXene-Ti3C2/Co Nanosheet Hydrogel Sensor with the Assistance of a Smartphone for On-Site Monitoring of Glucose in Beverages

A one-step cobaltous chloride (CoCl₂) molten salt method was employed to prepare multilayer MXene-Ti₃C₂/Co materials with further ultrasonic treatment to acquire single-layer MXene-Ti₃C_2/Co nanosheets (NSs). MXene-Ti₃C₂/Co NSs were characterized, and their enzyme-like activities were investigated. Under the catalysis of MXene-Ti₃C₂/Co NSs, 3,3',5,5'-tetramethylbenzidine (TMB) could be oxidized by H₂O₂, with the color changing from colorless to blue. The affinity of MXene-Ti₃C₂/Co NSs to H₂O₂ and TMB was better than that of nanozymes reported in previous studies. The MXene-Ti₃C₂/Co NSs were used for the colorimetric determination of H₂O₂/glucose, with limits of detection (LODs) of 0.033 mM and 1.7 μM, respectively. MXene-Ti₃C₂/Co NSs embedded in sodium alginate (SA) hydrogel were used to construct a sensor platform. The digital pictures combined with a smartphone-installed app (color recognizer) could be used to analyze RGB values for colorimetric detection of glucose in beverages. This point-of-care testing platform has the advantages of cost-effectiveness and good transferability, with the potential to realize quick, intelligent and on-site detection.

3D CoMoO4 nanoflake arrays decorated disposable pencil graphite electrode for selective and sensitive enzyme-less electrochemical glucose sensors

Three-dimensional (3D) cobalt molybdate (CoMoO₄) hierarchical nanoflake arrays on pencil graphite electrode (PGE) (CoMoO₄/PGE) are actualized via one-pot hydrothermal technique. The morphological features comprehend that the CoMoO₄ nanoflake arrays expose the 3D, open, porous, and interconnected network architectures on PGE. The formation and growth mechanisms of CoMoO₄ nanostructures on PGE are supported with different structural and morphological characterizations. The constructed CoMoO₄/PGE is operated as an electrocatalytic probe in enzyme-less electrochemical glucose sensor (ELEGS), confronting the impairments of cost- and time-obsessed conventional electrode polishing and catalyst amendment progressions and obliged the employment of a non-conducting binder. The wide-opened interior and exterior architectures of CoMoO₄ nanoflake arrays escalate the glucose utilization efficacy, whilst the intertwined nanoflakes and graphitic carbon layers, respectively, of CoMoO₄ and PGE articulate the continual electron mobility and catalytically active channels of CoMoO₄/PGE. It jointly escalates the ELEGS concerts of CoMoO₄/PGE including high sensitivity (1613 μA mM^-1 cm^-2), wide linear glucose range (0.0003-10 mM), and low detection limit (0.12 µM) at a working potential of 0.65 V (vs. Ag/AgCl) together with the good recovery in human serum. Thus, the fabricated CoMoO₄/PGE extends exclusive virtues of modest electrode production, virtuous affinity, swift response, and excellent sensitivity and selectivity, exposing innovative prospects to reconnoitring the economically viable ELEGSs with binder-free, affordable cost, and expansible 3D electrocatalytic probes.

Nonenzymatic Hydrogen Peroxide Detection Using Surface-Enhanced Raman Scattering of Gold-Silver Core-Shell-Assembled Silica Nanostructures

Hydrogen peroxide (H₂O₂) plays important roles in cellular signaling and in industry. Thus, the accurate detection of H₂O₂ is critical for its application. Unfortunately, the direct detection of H₂O₂ by surface-enhanced Raman spectroscopy (SERS) is not possible because of its low Raman cross section. Therefore, the detection of H₂O₂ via the presence of an intermediary such as 3,3,5,5-tetramethylbenzidine (TMB) has recently been developed. In this study, the peroxidase-mimicking activity of gold–silver core–shell-assembled silica nanostructures (SiO₂@Au@Ag alloy NPs) in the presence of TMB was investigated using SERS for detecting H₂O₂. In the presence of H₂O₂, the SiO₂@Au@Ag alloy catalyzed the conversion of TMB to oxidized TMB, which was absorbed onto the surface of the SiO₂@Au@Ag alloy. The SERS characteristics of the alloy in the TMB–H₂O₂ mixture were investigated. The evaluation of the SERS band to determine the H₂O₂ level utilized the SERS intensity of oxidized TMB bands. Moreover, the optimal conditions for H₂O₂ detection using SiO₂@Au@Ag alloy included incubating 20 µg/mL SiO₂@Au@Ag alloy NPs with 0.8 mM TMB for 15 min and measuring the Raman signal at 400 µg/mL SiO₂@Au@Ag alloy NPs.