Giant Magnetoresistance and Magneto-Thermopower in 3D Interconnected NixFe1-x/Cu Multilayered Nanowire Networks

A thin-film polymer heating element with a continuous silver nanowires network embedded inside

This study presents a method for fabricating a film-based heating element using a polymer material with an array of intersecting conductive elements embedded within it. Track-etched membranes (TM) with a thickness of 10μm were used as the template, and their pores were filled with metal, forming a three-dimensional grid. Due to the unique manufacturing process of TM, the pores inside intersect with each other, allowing for contacts between individual nanowires (NWs) when filled with metal. Experimental results demonstrated that filling the TM pores with silver allows for heating temperatures up to 78 degrees without deformation or damage to the heating element. The resulting flexible heating element can be utilized in medical devices for heating purposes or as a thermal barrier coating.

Tunable Magnetic Properties of Interconnected Permalloy Nanowire Networks

In this study, we investigate the magnetic properties of interconnected permalloy nanowire networks using micromagnetic simulations. The effects of interconnectivity on the hysteresis curves, coercivity, and remanence of the nanowire networks are analyzed. Our results reveal intriguing characteristics of the hysteresis curves, including nonmonotonic behaviors of coercivity as a function of the position of horizontal nanowires relative to vertical nanowires. By introducing horizontal nanowires at specific positions, the coercivity of the nanowire networks can be enhanced without altering the material composition. The normalized remanence remains relatively constant regardless of the position of the horizontal wires, although it is lower in the interconnected nanowire arrays compared to nonconnected arrays. These findings provide valuable insights into the design and optimization of nanowire networks for applications requiring tailored magnetic properties.

Interplay between diffusion and magnon-drag thermopower in pure iron and dilute iron alloy nanowire networks

Results of measurements on the thermoelectric power of 45 nm diameter interconnected nanowire networks consisting of pure Fe, dilute FeCu and FeCr alloys and Fe/Cu multilayers are presented. The thermopower values of Fe nanowires are very close to those found in bulk materials, at all temperatures studied between 70 and 320 K. For pure Fe, the diffusion thermopower at room temperature, estimated to be around - 15 [Formula: see text]V/K from our data, is largely supplanted by the estimated positive magnon-drag contribution, close to 30 [Formula: see text]V/K. In dilute FeCu and FeCr alloys, the magnon-drag thermopower is found to decrease with increasing impurity concentration to about 10 [Formula: see text]V/K at 10[Formula: see text] impurity content. While the diffusion thermopower is almost unchanged in FeCu nanowire networks compared to pure Fe, it is strongly reduced in FeCr nanowires due to pronounced changes in the density of states of the majority spin electrons. Measurements performed on Fe(7 nm)/Cu(10 nm) multilayer nanowires indicate a dominant contribution of charge carrier diffusion to the thermopower, as previously found in other magnetic multilayers, and a cancellation of the magnon-drag effect. The magneto-resistance and magneto-Seebeck effects measured on Fe/Cu multilayer nanowires allow the estimation of the spin-dependent Seebeck coefficient in Fe, which is about - 7.6 [Formula: see text]V/K at ambient temperature.

Fabrication of a 3D Nanomagnetic Circuit with Multi-Layered Materials for Applications in Spintronics

Three-dimensional (3D) spintronic devices are attracting significant research interest due to their potential for both fundamental studies and computing applications. However, their implementations face great challenges regarding not only the fabrication of 3D nanomagnets with high quality materials, but also their integration into 2D microelectronic circuits. In this study, we developed a new fabrication process to facilitate the efficient integration of both non-planar 3D geometries and high-quality multi-layered magnetic materials to prototype 3D spintronic devices, as a first step to investigate new physical effects in such systems. Specifically, we exploited 3D nanoprinting, physical vapour deposition and lithographic techniques to realise a 3D nanomagnetic circuit based on a nanobridge geometry, coated with high quality Ta/CoFeB/Ta layers. The successful establishment of this 3D circuit was verified through magnetotransport measurements in combination with micromagnetic simulations and finite element modelling. This fabrication process provides new capabilities for the realisation of a greater variety of 3D nanomagnetic circuits, which will facilitate the understanding and exploitation of 3D spintronic systems.