Recent Advances in Layered Double Hydroxide-Based Electrochemical and Optical Sensors

Two-Dimensional CuMn-Layered Double Hydroxides: A Study of Interlayer Anion Variants on the Electrochemical Sensing of Trichlorophenol

Despite their diverse application profile, aromatic organochlorides such as 2,4,6-trichlorophenol (TP) are widely renowned for creating a negative toll on the balance of the ecosystem. Strict regulatory regimes are required to limit exposure to such organic pollutants. By deployment of a straightforward detection scheme, electrochemical sensing technology offers a competitive edge over the other techniques and practices available for pollutant monitoring. Here, we present a streamlined hydrothermal approach for synthesizing copper-manganese layered double hydroxide (CuMn-LDH) rods to be employed as electrocatalysts for detecting TP in various media. With a focused intention to leverage the full potential of the prepared CuMn-LDHs, the interlamellar region is configured using a series of intercalants. Further, a thorough comparative analysis of their structures, morphologies, and electrochemical performance is accomplished using various analytical techniques. The electrocatalytic oxidation ability of the CuMn-LDH toward TP molecules is markedly altered by incorporating various anions into the gallery region. The dynamic attributes of the developed sensor, such as a wide linear response (0.02-289.2 μM), a low detection limit (0.0026 μM), and good anti-interfering ability, acclaim its superior viability for real-time detection of TP with exceptional tolerance to the presence of foreign moieties. Hence, this work manifests that the nature of intercalants is a vital aspect to consider while designing LDH-based electrochemical probes to detect priority pollutants.

Binary Ni-Fe layered double hydroxide on flexible nickel foam for the wide-range voltammetric detection of fibrinogen in simulated body fluid

Fibrinogen, a circulating glycoprotein in the blood, is a potential biomarker of various health conditions. This work reports a flexible electrochemical sensor based on Ni-Fe layered double hydroxide (Ni-Fe LDH) coated on Nickel foam (Ni-Fe LDH/NF) to detect fibrinogen in simulated human body fluid (or blood plasma). The nanoflakes like morphology and hexagonal crystal structure of LDH, synthesized via urea hydrolysis assisted precipitation technique, are revealed by scanning electron microscopy (SEM) and powder x-ray diffraction (PXRD) techniques, respectively. The fabricated sensor exhibits linearity in a wide dynamic range covering the physiological concentration, from 1 ng ml-1to 10 mg ml-1, with a sensitivity of 0.0914 mA (ng/ml)-1(cm)-2. This LDH-based sensor is found to have a limit of detection (LOD) of 0.097 ng ml-1and a limit of quantification (LOQ) of 0.294 ng ml-1(S/N = 3.3). The higher selectivity of the sensor towards fibrinogen protein is verified in the presence of various interfering analytes such as dopamine, epinephrine, serotonin, glucose, potassium, chloride, and magnesium ions. The sensor is successful in the trace-level detection of fibrinogen in simulated body fluid with excellent recovery percentages ranging from 99.5% to 102.5%, proving the synergetic combination of 2D Ni-Fe layered double hydroxide and 3D nickel foam as a promising platform for electrochemical sensing that has immense potential in clinical applications.

High sensitivity detection of different pH ranges with rGO-nanocomposite coated eFBG sensor

In the proposed work, a highly sensitive reduced graphene oxide (rGO) coated etched fiber Bragg grating (eFBG) pH sensor is developed and characterized. To create the sensing probe, a nanocomposite layer of rGO is coated over the unclad area of the eFBG. The analysis of rGO material has been done using different characterization tools such as UV-VIS-NIR spectroscopy, x-ray diffraction (XRD), and field emission scanning electron microscopy (FESEM). Experiments are performed using pH samples ranging from pH 2 to pH 12 to validate the operational sensing range of the proposed sensor. The effectiveness of the proposed sensor is evaluated with various pH values by monitoring the shift in the resonance peak of the sensor's reflection spectrum in a real-time interrogation system. The sensor performs well in both low and high pH ranges, with a maximum sensitivity of 0.232 nm/pH at pH 12. Due to a shift in the rGO's optical band-gap at both low and high pH values in the samples, the sensor can detect minimal changes in concentration. In the reflected spectrum, the Bragg wavelength (λ B) shifts as a result of the change in the refractive index. The λ B is observed to change as the pH of the aqueous solution is changed experimentally. Its performance is shown to be minimally affected by the ambient temperature (in the range of 19-21∘ C). The sensor also has the capacity for remote sensing, a quick response time, a small size, a low cost, a miniaturized probe, and the ability to reuse the probe.

Recent Development in Novel Lithium-Sulfur Nanofiber Separators: A Review of the Latest Fabrication and Performance Optimizations

Lithium-Sulfur batteries (LSBs) are one of the most promising next-generation batteries to replace Li-ion batteries that power everything from small portable devices to large electric vehicles. LSBs boast a nearly five times higher theoretical capacity than Li-ion batteries due to sulfur's high theoretical capacity, and LSBs use abundant sulfur instead of rare metals as their cathodes. In order to make LSBs commercially viable, an LSB's separator must permit fast Li-ion diffusion while suppressing the migration of soluble lithium polysulfides (LiPSs). Polyolefin separators (commonly used in Li-ion batteries) fail to block LiPSs, have low thermal stability, poor mechanical strength, and weak electrolyte affinity. Novel nanofiber (NF) separators address the aforementioned shortcomings of polyolefin separators with intrinsically superior properties. Moreover, NF separators can easily be produced in large volumes, fine-tuned via facile electrospinning techniques, and modified with various additives. This review discusses the design principles and performance of LSBs with exemplary NF separators. The benefits of using various polymers and the effects of different polymer modifications are analyzed. We also discuss the conversion of polymer NFs into carbon NFs (CNFs) and their effects on rate capability and thermal stability. Finally, common and promising modifiers for NF separators, including carbon, metal oxide, and metal-organic framework (MOF), are examined. We highlight the underlying properties of the composite NF separators that enhance the capacity, cyclability, and resilience of LSBs.

Modification strategies of membranes with enhanced Anti-biofouling properties for wastewater Treatment: A review

This review addresses composite membranes used for wastewater treatment, focusing heavily on the anti-biofouling properties of such membranes. Biofouling caused by the development of a thick biofilm on the membrane surface is a major issue that reduces water permeance and reduces its lifetime. Biofilm formation and adhesion are mitigated by modifying membranes with two-dimensional or zero-dimensional carbon-based nanomaterials or their modified substituents. In particular, nanomaterials based on graphene, including graphene oxide and carbon quantum dots, are mainly used as nanofillers in the membrane. Functionalization of the nanofillers with various organic ligands or compositing the nanofiller with other materials, such as silver nanoparticles, enhances the bactericidal ability of composite membranes. Moreover, such membrane modifications reduce biofilm adhesion while increasing water permeance and salt/dye rejection. This review discusses the recent literature on developing graphene oxide-based and carbon quantum dot-based composite membranes for biofouling-resistant wastewater treatment.

Three-dimensional mesoporous ultra-thin monometallic cobalt layered double hydroxides nanomaterials as efficient NO2 gas sensor at room temperature

Monometallic cobalt layered double hydroxides (Co-LDHs) were synthesized using a simple hydrothermal method. 2-methylimidazole (MIm) was selected as a functional agent. The functionalization and optimization has access to the CCM...