MOFs Derived Hetero-ZnO/Fe2O3 Nanoflowers with Enhanced Photocatalytic Performance towards Efficient Degradation of Organic Dyes

High photocatalytic efficiency of a ZnO nanoplate/Fe2O3 nanospindle hybrid using visible light for methylene blue degradation

In this work, ZnO nanoplates and Fe2O3 nanospindles were successfully fabricated via a simple hydrothermal method using inorganic salts as precursors. The ZnO/Fe2O3 hybrid was fabricated using a mechanical mixture of two different ZnO : Fe2O3 weight ratios to investigate the effect of weight ratio on catalytic properties. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images showed that ZnO nanoplates (NPls) are about 20 nm thick with lateral dimensions of 100 × 200 nm, and Fe2O3 nanospindles (NSs) are about 500 nm long and 50 nm wide. X-ray diffraction (XRD) patterns revealed the successful formation of the ZnO, Fe2O3, and ZnO/Fe2O3 samples and indicated that their crystallite sizes varied from 20 to 29 nm depending on the ZnO : Fe2O3 weight ratio. Ultraviolet-visible (UV-vis) spectra showed that the bandgap energies of ZnO and Fe2O3 were 3.15 eV and 2.1 eV, respectively. Energy dispersive X-ray spectroscopy (EDS) results revealed the successful combination of ZnO and Fe2O3. Photocatalytic activity of the materials was evaluated through the degradation of methylene blue (MB) in aqueous solution under green light-emitting diode (GLED) irradiation. The results indicated that the ZnO/Fe2O3 composite showed a remarkable enhanced degradation capacity compared to bare ZnO NPls and Fe2O3 NSs. The ZnO : Fe2O3 = 3 : 2 sample demonstrated the best performance among all samples under identical conditions with a degradation efficiency of 99.3% for MB after 85 min. The optimum photocatalytic activity of the sample with ZnO : Fe2O3 = 3 : 2 was nearly 3.6% higher than that of the pure ZnO sample and 1.12 times more than that of the pristine Fe2O3 sample. Moreover, the highest photo-degradation was obtained at a photocatalyst dosage of 0.25 g l-1 in dye solution.

Ultra-Dispersed α-MoC1-x Embedded in a Plum-Like N-Doped Carbon Framework as a Synergistic Adsorption-Electrocatalysis Interlayer for High-Performance Li-S Batteries

The shuttle effect and sluggish redox kinetics of lithium polysulfides (LiPSs) severely hinder the scalable application of lithium-sulfurr (Li-S) batteries. Herein, the highly dispersed α-phase molybdenum carbide nano-crystallites embedded in a porous nitrogen-doped carbon framework (α-MoC1-x @NCF) are developed via a simple metal-organic frameworks (MOFs) assisted strategy and proposed as the multifunctional separator interlayer for Li-S batteries. The inlaid MoC1-x nanocrystals and in situ doped nitrogen atoms provide a strong chemisorption and outstanding electrocatalytic conversion toward LiPSs, whereas the unique plum-like carbon framework with hierarchical porosity enables fast electron/Li+ transfer and can physically suppress LiPSs shuttling. Benefiting from the synergistic trapping-catalyzing effect of the MoC1-x @NCF interlayer toward LiPSs, the assembled Li-S battery achieves high discharge capacities (1588.1 mAh g-1 at 0.1 C), impressive rate capability (655.8 mAh g-1 at 4.0 C) and ultra-stable lifespan (a low capacity decay of 0.059% per cycle over 650 cycles at 1.0 C). Even at an elevated sulfur loading (6.0 mg cm-2 ) and lean electrolyte (E/S is ≈5.8 µL mg-1 ), the battery can still achieve a superb areal capacity of 5.2 mAh cm-2 . This work affords an effective design strategy for the construction of muti-functional interlayer in advanced Li-S batteries.

Principles of Design and Synthesis of Metal Derivatives from MOFs

Materials derived from metal-organic frameworks (MOFs) have demonstrated exceptional structural variety and complexity and can be synthesized using low-cost scalable methods. Although the inherent instability and low electrical conductivity of MOFs are largely responsible for their low uptake for catalysis and energy storage, a superior alternative is MOF-derived metal-based derivatives (MDs) as these can retain the complex nanostructures of MOFs while exhibiting stability and electrical conductivities of several orders of magnitude higher. The present work comprehensively reviews MDs in terms of synthesis and their nanostructural design, including oxides, sulfides, phosphides, nitrides, carbides, transition metals, and other minor species. The focal point of the approach is the identification and rationalization of the design parameters that lead to the generation of optimal compositions, structures, nanostructures, and resultant performance parameters. The aim of this approach is to provide an inclusive platform for the strategies to design and process these materials for specific applications. This work is complemented by detailed figures that both summarize the design and processing approaches that have been reported and indicate potential trajectories for development. The work is also supported by comprehensive and up-to-date tabular coverage of the reported studies.

One-step removal of hexavalent chromium in wide pH range using thiourea dioxide: the role of reactive species

One-step removal of hexavalent chromium in a wide pH range is of great significance. In this paper, a single thiourea dioxide (TD) and two-components thiourea dioxide/ethanolamine (MEA) were used as a green reducing agent for the efficient removal of Cr(vi), respectively. The reduction of Cr(vi) and the precipitation of Cr(iii) were carried out simultaneously under this reaction system. The experimental results proved that TD was activated by amine exchange reaction with MEA. In other words, MEA promoted the generation of an active isomeride of TD by changing the equilibrium position of the reversible reaction. After adding MEA, the removal rate of Cr(vi) and total Cr could reach industrial water discharge standards in a wide pH range of 8-12. The change of pH, reduction potential and the decomposition rate of TD were investigated in the reaction processes. Meanwhile, reductive and oxidative reactive species were produced simultaneously during this reaction process. Further, oxidative reactive species (O₂˙^- and ¹O₂) were beneficial for the decomplexation of Cr(iii) complexes and the formation of Cr(iii) precipitation. The experimental results also demonstrated that TD/MEA was effective in practical industrial wastewater. Hence this reaction system has a significant industrial application prospect.

Optical and Photocatalytic Properties of Br-Doped BiOCl Nanosheets with Rich Oxygen Vacancies and Dominating {001} Facets

Crystal facet engineering and nonmetal doping are regarded as effective strategies for improving the separation of charge carriers and photocatalytic activity of semiconductor photocatalysts. In this paper, we developed a facial method for fabricating oxygen-deficient Br-doped BiOCl nanosheets with dominating {001} facets through a traditional hydrothermal reaction and explored the impact of the Br doping and specific facets on carrier separation and photocatalytic performance. The morphologies, structures, and optical and photocatalytic properties of the obtained products were characterized systematically. The BiOCl samples prepared by the hydrothermal reaction exhibited square-like shapes with dominating {001} facets. Photodeposition results indicated that photoinduced electrons preferred to transfer to {001} facets because of the strong internal static electric fields in BiOCl nanosheets with dominating {001} facets. Br doping not only contributed to the formation of impurity energy levels that could promote light absorption but introduced a large number of surface oxygen vacancies (VO) in BiOCl photocatalysts, which was beneficial for photocatalytic performance. Moreover, the photocatalytic activities of these products under visible light were tested by degradation of rhodamine B (RhB). Because of the synergistic effect of the dominating {001} facets, Br doping, and rich VO, oxygen-deficient Br-doped BiOCl nanosheets exhibited improved carrier separation, visible light absorption, and photocatalytic efficiency.