High Sensitivity Surface Plasmon Resonance Sensor Based on Periodic Multilayer Thin Films

Lossy Mode Resonance Sensors Based on Anisotropic Few-Layer Black Phosphorus

Lossy mode resonance (LMR) sensors offer a promising avenue to surpass the constraints of conventional surface plasmon resonance (SPR) sensors by delivering enhanced label-free detection capabilities. A notable edge of LMR over SPR is its excitation potential by both transverse electric (TE) and transverse magnetic (TM) polarized light. Yet this merit remains underexplored due to challenges to achieving high sensing performance under both TM and TE polarization within a singular LMR model. This study introduces a theoretical model for an LMR prism refractive index sensor based on a MgF2-few layer black phosphorus-MgF2 configuration, which can achieve angular sensitivity nearing 90° refractive index unit-1 (RIU-1) for both polarizations. Leveraging the distinct anisotropic nature of black phosphorus, the figure of merit (FOM) values along its two principal crystal axes (zigzag and armchair) show great difference, achieving an impressive FOM of 1.178 × 106 RIU-1 along the zigzag direction under TE polarized light and 1.231 × 104 RIU-1 along the armchair direction under TM polarized light. We also provide an analysis of the electric field distribution for each configuration at its respective resonant conditions. The proposed structure paves the way for innovative applications of anisotropic-material-based LMR sensors in various applications.

Dynamic measurement of an angular Goos-Hänchen shift at a surface plasmon resonance in liquid

We developed a surface plasmon resonance (SPR)-enhanced angular Goos-Hänchen (GH) shift measurement system capable of tracking small refractive index changes with high sensitivity in a liquid environment. Our method can be performed in angular interrogation schemes, where we demonstrate a simple zero-finding algorithm to locate the SPR angle instead of the complicated data processing algorithms used in conventional sensors. We also propose a displacement interrogation scheme for dynamic measurement of small refractive index changes in the sample. The main advantage of our method is the controllability of the measured displacement by standard geometrical optics, allowing measurement sensitivity enhancement without the need to modify the sensor material.

Theoretical and experimental study of a highly sensitive SPR biosensor based on Au grating and Au film coupling structure

A high-sensitivity surface plasmon resonance (SPR) sensor based on the coupling of Au grating and Au film is investigated through simulations and experiments. The SPR sensor is designed by using a hybrid method composed of genetic algorithm (GA) and rigorous coupled wave analysis (RCWA). The numerical results indicate the sensor has an angular sensitivity of 397.3°/RIU (refractive index unit), which is approximately 2.81 times higher than the conventional Au-based sensor and it is verified by experiments. Theoretical analysis, by finite-difference time-domain (FDTD) method, demonstrates the co-coupling between surface plasmon polaritons (SPPs) propagating on the surface of Au film and localized surface plasmons (LSPs) in the Au grating nanostructure, improving the sensitivity of the SPR sensor. According to the optimized structural parameters, the proposed sensor is fabricated using e-beam lithography and magnetron sputtering. In addition, the proposed sensor is very sensitive to the detection of small molecules. The limit of detection (LOD) for okadaic acid (OA) is 0.72 ng/mL based on an indirect competitive inhibition method, which is approximately 38 times lower than the conventional Au sensor. Such a high-sensitivity SPR biosensor has potential in the applications of immunoassays and clinical diagnosis.

Performance Enhancement of SPR Biosensor Using Graphene–MoS2 Hybrid Structure

We investigate a high-sensitivity surface plasmon resonance (SPR) biosensor consisting of a Au layer, four-layer MoS₂, and monolayer graphene. The numerical simulations, by the transfer matrix method (TMM), demonstrate the sensor has a maximum sensitivity of 282°/RIU, which is approximately 2 times greater than the conventional Au-based SPR sensor. The finite difference time domain (FDTD) indicates that the presence of MoS₂ film generates a strong surface electric field and enhances the sensitivity of the proposed SPR sensor. In addition, the influence of the number of MoS₂ layers on the sensitivity of the proposed sensor is investigated by simulations and experiments. In the experiment, MoS₂ and graphene films are transferred on the Au-based substrate by the PMMA-based wet transfer method, and the fabricated samples are characterized by Raman spectroscopy. Furthermore, the fabricated sensors with the Kretschmann configuration are used to detect okadaic acid (OA). The okadaic acid–bovine serum albumin bioconjugate (OA-BSA) is immobilized on the graphene layer of the sensors to develop a competitive inhibition immunoassay. The results show that the sensor has a very low limit of detection (LOD) of 1.18 ng/mL for OA, which is about 22.6 times lower than that of a conventional Au biosensor. We believe that such a high-sensitivity SPR biosensor has potential applications for clinical diagnosis and immunoassays.

The Optimization of Metal Nitride Coupled Plasmon Waveguide Resonance Sensors Using a Genetic Algorithm for Sensing the Thickness and Refractive Index of Diamond-like Carbon Thin Films

We theoretically designed the Kretschmann configuration coupled plasmon-waveguide resonance (CPWR) sensors, composed of thin films of metal nitrides. The thicknesses of the layers of the CPWR sensors were optimized using a genetic algorithm. The optimized CPWR sensors were applied to simultaneously measure the thickness and refractive index (RI) of diamond-like carbon (DLC) films. The field profiles and the sensitivity of the CPWR sensors in response to thin DLC films were studied using the finite-different time-domain technique and the transfer matrix method. The genetic algorithm method predicted that the two-mode CPWR sensors could simultaneously analyze the thickness and RI of the DLC films as thin as 1.0 nm at a wavelength of 1550 nm. The simulations showed that the angular sensitivity toward the refractive index changes of the DLC films of the optimized CPWR sensors was comparable to that of traditional CPWR sensors.