Dual-Channel Probe of Carbon Dots Cooperating with Lanthanide Complex Employed for Simultaneously Distinguishing and Sequentially Detecting Tetracycline and Oxytetracycline

Chemical- and green-precursor-derived carbon dots for photocatalytic degradation of dyes

Rapid industrialization and untreated industrial effluents loaded with toxic and carcinogenic contaminants, especially dyes that discharge into environmental waters, have led to a rise in water pollution, with a substantial adverse impact on marine life and humankind. Photocatalytic techniques are one of the most successful methods that help in degradation and/or removal of such contaminants. In recent years, semiconductor quantum dots are being substituted by carbon dots (CDs) as photocatalysts, due to the ease of formation, cost-effectiveness, possible sustainability and scalability, much lower toxicity, and above all its high capacity to harvest sunlight (UV, visible, and near infrared) through electron transfer that enhances the lifetime of the photogenerated charge carriers. A better understanding between the properties of the CDs and their role in photocatalytic degradation of dyes and contaminants is required for the formation of controllable structures and adjustable outcomes. The focus of this review is on CDs and its composites as photocatalysts obtained from different sustainable green as well as chemical precursors. Apart from the synthesis, characterization, and properties of the CDs, the study also highlights the effect of different parameters on the photocatalytic properties of CDs and their composites for catalytic dye degradation mechanisms in detail. Besides the present research development in the field, potential challenges and future perspectives are also presented.

Construction of fluorescent sensor array and three-dimensional microfluidic paper based analytical device for specific identification and visual determination of antibiotics in food

For antibiotics misuse since the global outbreak of COVID 19, a novel strategy for discriminating and detecting antibiotics is proposed based on the graphene quantum dots with multi-doped heteroatoms including F, N and P (M-GQDs), which exhibit blue emission (419.0 nm) under the excitation of 336.0 nm. Specifically, the fluorescence of M-GQDs is quenched by tetracyclines (TCs) owing to inner filter effect (IFE) and enhanced by alkane-modified fluoroquinolones (AFQs), which is attributed to restricted conformational rotation based on π-π stacking, hydrogen-bonding and electrostatic interactions. Meanwhile, the electron-accepting property of oxazine ring in oxazine-modified fluoroquinolones (OFQs) increases emission peak at 498.0 nm and decreases emission peak at 419.0 nm as the color changes from blue to cyan. Moreover, a cascade system integrated with 3D microfluidic paper-based analytical device (3D-μPAD) is applied successfully for visually distinguishing three antibiotics, which shows great potential and versatility of M-GQDs for food safety monitoring.

Preparation and application of carbon quantum dot fluorescent probes combined with rare earth ions

Globally, antibiotic abuse, organic contamination, and excessive heavy metal ion pollution pose serious threats to human health. In this case, ratiometric fluorescent probes can eliminate the errors caused by environmental factors and provide more accurate detection results than single-emission intensity nanoprobes. Accordingly, based on the excellent biocompatibility and abundant surface functional groups of carbon quantum dots (CQDs) and the properties of large Stokes shifts and narrow emission bands of rare earth ions (RE3+), RE-CQD fluorescent probes have attracted widespread attention. Herein, firstly we review the combination of carbon quantum dots with rare earth ions (rare earth complexes) using various functionalization approaches to improve the defects of rare earth complexes and realize the functionalization of carbon quantum dots and their applications in many fields, such as biology and environmental science. In addition, we classify the methods for the synthesis of RE-CQD hybrids into three groups according to the different binding modes of the RE and CQDs, including doping, covalent grafting, and direct coordination. The excellent properties of these fluorescent probes are also briefly described. Finally, a comprehensive overview of the important applications of RE-CQD fluorescent probes in the fields of public safety sensing, chemical sensing, biomedical sensing, temperature sensing, and pH sensing is presented. In this review, the recent research progress in the field of ratiometric fluorescence sensing based on carbon quantum dots and rare earth ions is summarized and an outlook on the future development of RE-CQD fluorescent probes regarding their construction and potential applications is provided.

Molecularly imprinted ratiometric fluorescence detection of tetracycline based on its fluorescence enhancement effect caused by tungsten trioxide quantum dots

This paper reports a novel probe developed based on the tungsten trioxide quantum dots (WO_3-x QDs) and molecularly imprinted polymers for the detection of trace tetracycline (TC) in the complex food matrix. Tungsten ion (W⁶⁺) in WO_3-x QDs has a fluorescence enhancement effect on TC, and TC has a fluorescence quenching effect on WO_3-x QDs. The blue emission of the WO_3-x QDs (λ_em = 470 nm) as a reference and the yellow emission of the TC (λ_em = 550 nm) as a response were utilized for the ratiometric fluorescence detection. In order to improve its selectivity, the molecular imprinting technology was combined to construct molecularly imprinted ratiometric fluorescent probes (MIRFPs). Therefore, the MIRFPs can not only selectively detect TC, but also realize the visual detection from blue to yellow. Under the optimal conditions, the linear ranges of 0.01 ∼ 10.0 μmol/L and 20.0 ∼ 80.0 μmol/L were obtained with the limits of detection of 3.23 nmol/L and 6.37 μmol/L, respectively. Furthermore, the MIRFPs had been successfully applied to the detection of TC in milk and eggs. The satisfactory recoveries were in the range of 92.7 ∼ 102.9 % with relative standard deviations (RSD, n = 3) below 1.59 %. This work offers a good strategy for the detection of food hazards.

Recent advances on rapid detection and remediation of environmental pollutants utilizing nanomaterials-based (bio)sensors

Environmental safety has become a significant issue for the safety of living species, humans, and the ecosystem as a consequence of the harmful and detrimental consequences of various pollutants such as pesticides, heavy metals, dyes, etc., emitted into the surroundings. To resolve this issue, various efforts, legal acts, scientific and technological perspectives have been embraced, but still remain a global concern. Furthermore, due to non-portability, complex detection, and inappropriate on-site recognition of sophisticated laboratory tools, the real-time analysis of these environmental contaminants has been limited. As a result of innovative nano bioconjugation and nanofabrication techniques, nanotechnology enables enhanced nanomaterials (NMs) based (bio)sensors demonstrating ultra-sensitivity and a short detection time in real-time analysis, as well as superior sensitivity, reliability, and selectivity have been developed. Several researchers have demonstrated the potent detection of pollutants such as Hg²⁺ ion by the usage of AgNP-MD in electronic and optoelectronic methods with a detection limit of 5-45 μM which is quite significant. Taking into consideration of such tremendous research, herein, the authors have highlighted 21st-century strategies towards NMs based biosensor technology for pollutants detection, including nano biosensors, enzyme-based biosensors, electrochemical-based biosensors, carbon-based biosensors and optical biosensors for on-site identification and detection of target analytes. This article will provide a brief overview of the significance of utilizing NMs-based biosensors for the detection of a diverse array of hazardous pollutants, and a thorough understanding of the detection processes of NMs-based biosensors, as well as the limit of quantification (LOQ) and limit of detection (LOD) values, rendering researchers to focus on the world's need for a sustainable earth.

Biomass-derived carbon dots as a sensitive and selective dual detection platform for fluoroquinolones and tetracyclines

A novel carbon dot (CD) was synthesized through the facile and simple hydrothermal method from Curcuma amada, as the precursor for the first time. These CDs with an average diameter of 4.6 nm display blue fluorescence, with excitation/emission maxima at 360/445 nm and a quantum yield of 14.1%. It exhibited high stability under different conditions and was characterized using various techniques. These CDs can be employed as a dual-sensing platform to detect tetracyclines and fluoroquinolones, two antibiotic classes. Even though antibiotics are regarded as an inevitable commodity, overuse and improper management of discarded antibiotics pose a severe threat to the environment. Herein, we developed a dual-sensing, biocompatible sensor with high selectivity and sensitivity to detect antibiotics. CD was employed as a fluorescence probe and detected tetracycline and fluoroquinolone antibiotic through inner filter effect-based fluorescence quenching and hydrogen bonding-based enhancement process, respectively. The linear range was 0-16 μM and the detection limit was 33 nM for tetracycline and 2 nM for fluoroquinolone antibiotic. As an electrochemical probe, CD selectively detected tetracycline with a lower detection limit of 0.5 nM over a linear range of 0-16 μM. Using both methods, a real sample analysis of the developed sensor exhibited accurate reliability and precision.