Construction of Electrochemical and Photoelectrochemical Sensing Platform Based on Porphyrinic Metal-Organic Frameworks for Determination of Ascorbic Acid

Band Alignment Modulated Polarity-Switchable PEC Ratiometric Sensor through Coupling a pH-Responsive CuTCPP MOF with i-Motif Sensing tool

In conventional ratiometric photoelectrochemical (PEC) sensors, the detection and reference signals are output sequentially from two independent photosensitive materials. In such a "two-to-two" ratiometric mode, unavoidable difference during dual-interface modification exists, resulting in questionable ratiometric signals and detection results. To address this issue, we propose a novel "one-to-two" ratiometric PEC sensor on a single electrode interface through pH-modulated band alignment engineering. The double ratiometric signals are generated by the synergistic action of a pH-responsive CuTCPP/WS2 photoelectric substrate material and the i-motif sensing tool. Specifically, a ternary heterostructure to generate a photoanodic detection signal is formed under alkaline conditions between CuTCPP/WS2 and signal label CdS QDs binding to the i-motif. While under acidic conditions, a photocurrent polarity conversion and signaling labels detachment, induced by the band realignment of CuTCPP/WS2 and the i-motif conformational switching, produce a reliable internal reference photocathodic signal. The feasibility of this two-wing signal generation strategy is validated by detecting mycotoxin ochratoxin A, which achieves accurate and reliable ratio detection results. Overall, this work provides guidance for the design of a PEC ratiometric determination system and exhibits great potential to be applied in practical analysis research.

Modulation of copper sites in porphyrin metal-organic frameworks for electrochemical ascorbic acid sensing

Two metal-organic frameworks (MOFs) with different Cu-centered coordination structures were synthesized. By introducing 4,4-bipyridine as a linker in the Cu-MOFs, we have discovered that Cu-O, instead of Cu-N, is the active site with higher electrocatalytical activity towards ascorbic acid, which is essential to understand and develop Cu-based ascorbic acid sensors.

A high-performance photoelectrochemical sensor based on CdS-Au composite nanomaterials and localized surface plasmon resonance for ultrasensitive detection of ascorbic acid

Ascorbic acid (AA), which plays a vital role in the metabolism of the human body, is closely correlated with various diseases, including rheumatoid arthritis, scurvy, Parkinson's disease, urinary stones, and diarrhea. The detection of AA is of great significance for early prevention and diagnosis of related diseases. In this paper, a high-performance photoelectrochemical (PEC) sensor was constructed based on cadmium sulfide-gold (CdS-Au) composite nanomaterials for ultrasensitive ascorbic acid (AA) detection. Due to the localized surface plasmon resonance (LSPR) effect of gold nanoparticles (AuNPs), the PEC performance of CdS-Au composite nanomaterials was significantly improved compared to CdS semiconductor nanomaterials. Under the optimal conditions, the AA concentration was linearly related to the photocurrent signal in the range of 0.01 μM-200 μM, with the detection limit being 0.2 nM (S/N = 3) and the sensitivity being 642.9 μA mM-1 cm-2. In addition, the mechanism of the PEC sensor based on CdS-Au composite nanomaterials for ultrasensitive AA detection was discussed. Lastly, the self-constructed PEC sensors have been successfully applied in detecting AA in vitamin C tablets and actual blood samples, meeting the detection criteria required by the Chinese Pharmacopoeia (CP, 2020 edition). The self-fabricated PEC sensors in this paper are expected to be used for quality assessment of AA-related drugs and diagnosis of relevant diseases.

Miniaturized ascorbic acid assay platform based on point discharge atomic emission spectrometry coupling with gold filament enrichment

BACKGROUND

Miniaturized microplasma-based atomic emission spectrometry (AES) has been extensively used for element analysis in recent years due to the advantages of low power consumption, low gas consumption, relatively low manufacturing and running cost, and the potential for real-time and field analysis. However, few applications in bioassay detection have been reported based on microplasma AES systems because of their relatively low sensitivity and the absence of indirect analytical strategies. It is still a challenge to develop a simple, sensitive, and portable microplasma-based AES bioassay approach.

RESULTS

In this work, a portable analytical system was designed based on point discharge chemical vapor generation atomic emission spectrometry (PD-CVG-AES) coupling with gold filament enrichment. The detection of ascorbic acid (AA) was realized indirectly by means of the highly sensitive analysis of Hg2+. The measurement was based on Ag + can decrease the concentration of Hg2+ by forming Ag-Hg amalgam in the presence of the reductant SnCl2, while AA can pre-reduce Ag + to Ag0, leading to the generation of silver nanoparticles (Ag NPs). The pre-reduce procedure can decrease the generation of Ag-Hg amalgam, resulting in the recovery of Hg2+ signal. The dissociative Hg2+ was further detected by PD-CVG-AES combination of gold filament enrichment, which significantly improved the detection sensitivity for both Hg2+ and AA. Under optimal conditions, the limit of detection (LOD) of AA is as low as 19 nM with a relative standard deviation (RSD, n = 5) of 0.7 %.

SIGNIFICANCE

The developed novel analytical strategy obviously broadens the application of microplasma-based AES, and it is well demonstrated by the determination of AA in several traditional Chinese medicines (TCMs), offering a higher level of sensitivity compared to current AA detection techniques. It has potential for future application in point-of-care testing (POCT) assays.

Highly efficient electrochemical detection of H2O2 utilizing an innovative copper porphyrinic nanosheet decorated bismuth metal-organic framework modified electrode

The ability to detect hydrogen peroxide is important due to the presence in biological systems. Researchers are highly interested in developing efficient electrochemical hydrogen peroxide sensors. Metal-organic frameworks (MOFs) with their composites, an emerging class of porous materials, are ideal candidates for heterogeneous catalysts because of their versatile functionalities. Using a facile solvothermal reaction, we fabricated a 2D Cu-TCPP nanosheet uniformly grown on a 3D Bi-MOF. The process takes advantage of the large surface area and pore volume of the Bi-MOF while maintaining the crystallinity of Bi-BTC when Cu-TCPP is added to the surface. The sensor was fabricated by depositing the Bi-BTC-Cu-TCPP nanocomposites on a glassy carbon electrode to conduct electrochemical measurements such as cyclic voltammetry and electrochemical impedance spectroscopy. Finally, differential pulse voltammetry was utilized to investigate the effect of hydrogen peroxide on the electrochemical activity of Bi-BTC-Cu-TCPP deposited on a glassy carbon electrode. This electrode showed high electrochemical performance activity for the reduction of hydrogen peroxide. The sensor showed a linear response to H2O2 in the 10-120 μM concentration range, with a detection limit of 0.20 μM. The sensor was also stable and selective for H2O2 in the presence of other interfering species. This work demonstrates the potential of nanocomposite-based electrochemical sensors for sensitive and selective detection of H2O2. Besides, the modified electrode has many advantages, including remarkable catalytic activity, long-term stability, good reproducibility, and a good signal response during H2O2 reduction.

Target-Induced Photocurrent-Polarity-Switching PEC Sensing Platform Based on In Situ Generation of Oxygen Vacancy-Modulated Energy Band Structures

The polarity of the photocurrent can be modulated by tunable bipolar photoelectrochemical (PEC) behavior, which is anticipated to address the issues of high background signal caused by traditional unidirectional increasing/decreasing response and false-positive/false-negative problems. Here, a new approach is suggested for the first time, which employs a target-induced enzyme-catalyzed reaction and in situ oxygen vacancy (OV) generation to achieve heterojunction photocurrent switching for highly sensitive detection of alkaline phosphatase (ALP). Among them, the ALP can catalyze the decomposition of ascorbic acid phosphate to produce ascorbic acid, which not only acts as an electron donor to change the redox environment but also acts as a reducing agent to introduce OVs into BiOBr semiconductors in cooperation with illumination. The introduction of vacancies can effectively modulate the energy band structure of BiOBr, while with the change of redox conditions, the transfer path of photogenerated carriers is changed, thus realizing the switching of photocurrents, which leads to its use in the construction of a negative-background anti-interference PEC sensing platform, achieving a wide linear range from 0.005 to 500 U·L-1 with a low detection limit of 0.0017 U·L-1. In conclusion, the photocurrent switching operation of this system is jointly regulated by chemistry, optics, and carrier motion, which provides a new idea for the construction of a PEC sensing platform based on photocurrent polarity switching.

A novel PEC and ECL bifunctional aptasensor based on V2CTx MXene-derived MOF embedded with silver nanoparticles for selectively aptasensing miRNA-126

A novel photoelectrochemical (PEC) and electrochemiluminescence (ECL) bifunctional aptasensor has been established for the detection of miRNA-126 using V2CTx MXene-derived porphyrin-based metal-organic framework embedded with Ag nanoparticles (Ag NPs) (denoted as AgNPs@V-PMOF) as a robust bioplatform. Due to the presence of V nodes in V2CTx MXene nanosheets, V-based MOF was prepared using tetrakis(4-carboxyphenyl)porphyrin as ligand, followed by the incorporation of Ag+ ions to form the AgNPs@V-PMOF Schottky heterojunction. Benefiting from the fast electron transfer of the V2CTx substrate and well-matched band-edge energy level of the photosensitive Ag NPs and V-PMOF, the constructed AgNPs@V-PMOF Schottky heterojunction exhibited the promoted transfer of the photogenerated carriers, showing superior PEC and ECL performances. Moreover, a large number of the complementary DNA strand of miRNA-126 can be immobilized over AgNPs@V-PMOF in view of the combined interaction of π-π stacking, van der Waals force, and Ag-N coordination between AgNPs@V-PMOF. Consequently, the developed AgNPs@V-PMOF-based aptasensor illustrated extremely low detection limits of 0.78 and 0.53 fM within a wide range from 1.0 fM to 1.0 nM of miRNA-126 detected by PEC and ECL techniques, respectively, superior to most reported miRNA aptasensors. Also, the provided bifunctional aptasensor demonstrated high selectivity, good stability, fine reproducibility, and acceptable regenerability, as well as promising potential for the analysis of miRNA-126 from living cancer cells. This work puts forward the development of aptasensors for the early and accurate diagnosis of cancer markers and extends the application of MOF in the biosensing field.

Special Issue: Recent Advances in Nanomaterials for Electrochemical Sensing and Nano-Biosensing

Nanomaterials have been instrumental in the development of electrochemical nano-biosensors, offering high sensitivity and selectivity [...].

Ultrathin metal-organic framework nanosheets as building blocks of lamellar nanofilms for ultrafast molecular sieving

Metal-organic framework (MOF) nanosheets have significant potential applications including separation, catalysis, and sensors. However, the on-demand design with tunable thickness and morphology remains a great challenge, leading to difficulties in modulating their hierarchical assembly for the preparation of macroscopic films. Herein, we report the successful synthesis of smooth and ultrathin MOF (Cu-TCPP (TCPP = 4,4,4,4-(porphine-5,10,15,20-tetrayl)tetrakis(benzoic acid))) nanosheets used in lamellar nanofilms for the rejection of organic molecules from water. Dopamine hydrochloride (DA-HCl) is used as an adjuvant in the synthesis. Facilitated by a HCl acid environment and DA competitive coordination, the normal and lateral growths of Cu-TCPP nanosheets are modulated to achieve the desired thickness and morphology. DA-HCl can be also easily removed from the nanosheets without affecting their physicochemical properties. The as-synthesized nanosheets are utilized as nanofilm building blocks in which they are stacked into ordered bricks. The obtained membrane displays an ultrahigh water permeance of 2540 L m^-2 h^-1 bar^-1, which is two orders of magnitude higher than the currently reported polymer membranes, while it does not sacrifice the solute rejection as completely determined by the intrinsic pore size of the nanosheets (i.e., 98.8% for molecules larger than 1.3 nm). This work provides a novel and facile strategy to tailor the morphology of the MOF nanosheets for maximizing their functionalities and structure superiority in many engineering applications.

Design and Application of Electrochemical Sensors with Metal-Organic Frameworks as the Electrode Materials or Signal Tags

Metal-organic frameworks (MOFs) with fascinating chemical and physical properties have attracted immense interest from researchers regarding the construction of electrochemical sensors. In this work, we review the most recent advancements of MOF-based electrochemical sensors for the detection of electroactive small molecules and biological macromolecules (e.g., DNA, proteins, and enzymes). The types and functions of MOF-based nanomaterials in terms of the design of electrochemical sensors are also discussed. Furthermore, the limitations and challenges of MOF-based electrochemical sensing devices are explored. This work should be invaluable for the development of MOF-based advanced sensing platforms.

Nitrites Detection with Sensors Processed via Matrix-Assisted Pulsed Laser Evaporation

This work is focused on the application of a laser-based technique, i.e., matrix-assisted pulsed laser evaporation (MAPLE) for the development of electrochemical sensors aimed at the detection of nitrites in water. Commercial carbon-based screen-printed electrodes were modified by MAPLE via the application of a newly developed composite coating with different concentrations of carbon nanotubes (CNTs), chitosan, and iron (II) phthalocyanine (C₃₂H₁₆FeN₈). The performance of the newly fabricated composite coatings was evaluated both by investigating the morphology and surface chemistry of the coating, and by determining the electro-catalytic oxidation properties of nitrite with bare and modified commercial carbon-based screen-printed electrode. It was found that the combined effect of CNTs with chitosan and C₃₂H₁₆FeN₈ significantly improves the electrochemical response towards the oxidation of nitrite. In addition, the MAPLE modified screen-printed electrodes have a limit of detection of 0.12 µM, which make them extremely useful for the detection of nitrite traces.