Numerical Simulation of Temperature Variations during the Application of Safety Protocols in Magnetic Particle Hyperthermia

Initial therapeutic evidence of a borosilicate bioactive glass (BSG) and Fe3O4 magnetic nanoparticle scaffold on implant-associated Staphylococcal aureus bone infection

Implant-associated Staphylococcus aureus (S. aureus) osteomyelitis is a severe challenge in orthopedics. While antibiotic-loaded bone cement is a standardized therapeutic approach for S. aureus osteomyelitis, it falls short in eradicating Staphylococcus abscess communities (SACs) and bacteria within osteocyte-lacuna canalicular network (OLCN) and repairing bone defects. To address limitations, we developed a borosilicate bioactive glass (BSG) combined with ferroferric oxide (Fe3O4) magnetic scaffold to enhance antibacterial efficacy and bone repair capabilities. We conducted comprehensive assessments of the osteoinductive, immunomodulatory, antibacterial properties, and thermal response of this scaffold, with or without an alternating magnetic field (AMF). Utilizing a well-established implant-related S. aureus tibial infection rabbit model, we evaluated its antibacterial performance in vivo. RNA transcriptome sequencing demonstrated that BSG + 5%Fe3O4 enhanced the immune response to bacteria and promoted osteogenic differentiation and mineralization of MSCs. Notably, BSG + 5%Fe3O4 upregulated gene expression of NOD-like receptor and TNF pathway in MSCs, alongside increased the expression of osteogenic factors (RUNX2, ALP and OCN) in vitro. Flow cytometry on macrophage exhibited a polarization effect towards M2, accompanied by upregulation of anti-inflammatory genes (TGF-β1 and IL-1Ra) and downregulation of pro-inflammatory genes (IL-6 and IL-1β) among macrophages. In vivo CT imaging revealed the absence of osteolysis and periosteal response in rabbits treated with BSG + 5%Fe3O4 + AMF at 42 days. Histological analysis indicated complete controls of SACs and bacteria within OLCN by day 42, along with new bone formation, signifying effective control of S. aureus osteomyelitis. Further investigations will focus on the in vivo biosafety and biological mechanism of this scaffold within infectious microenvironment.

Computer simulation-based nanothermal field and tissue damage analysis for cardiac tumor ablation

Radiofrequency ablation is a nominally invasive technique to eradicate cancerous or non-cancerous cells by heating. However, it is still hampered to acquire a successful cell destruction process due to inappropriate RF intensities that will not entirely obliterate tumorous tissues, causing in treatment failure. In this study, we are acquainted with a nanoassisted RF ablation procedure of cardiac tumor to provide better outcomes for long-term survival rate without any recurrences. A three-dimensional thermo-electric energy model is employed to investigate nanothermal field and ablation efficiency into the left atrium tumor. The cell death model is adopted to quantify the degree of tissue injury while injecting the Fe3O4 nanoparticles concentrations up to 20% into the target tissue. The results reveal that when nanothermal field extents as a function of tissue depth (10 mm) from the electrode tip, the increasing thermal rates were approximately 0.54362%, 3.17039%, and 7.27397% for the particle concentration levels of 7%, 10%, and 15% compared with no-particle case. In the 7% Fe3O4 nanoparticles, 100% fractional damage index is achieved after ablation time of 18 s whereas tissue annihilation approach proceeds longer to complete for no-particle case. The outcomes indicate that injecting nanoparticles may lessen ablation time in surgeries and prevent damage to adjacent healthy tissue.

A Validated Methodological Approach to Prove the Safety of Clinical Electromagnetic Induction Systems in Magnetic Hyperthermia

The present study focuses on the development of a methodology for evaluating the safety of MNH systems, through the numerical prediction of the induced temperature rise in superficial skin layers due to eddy currents heating under an alternating magnetic field (AMF). The methodology is supported and validated through experimental measurements of the AMF's distribution, as well as temperature data from the torsos of six patients who participated in a clinical trial study. The simulations involved a computational model of the actual coil, a computational model of the cooling system used for the cooling of the patients during treatment, and a detailed human anatomical model from the Virtual Population family. The numerical predictions exhibit strong agreement with the experimental measurements, and the deviations are below the estimated combined uncertainties, confirming the accuracy of computational modeling. This study highlights the crucial role of simulations for translational medicine and paves the way for personalized treatment planning.

Electrospun Magnetic Nanofiber Mats for Magnetic Hyperthermia in Cancer Treatment Applications-Technology, Mechanism, and Materials

The number of cancer patients is rapidly increasing worldwide. Among the leading causes of human death, cancer can be regarded as one of the major threats to humans. Although many new cancer treatment procedures such as chemotherapy, radiotherapy, and surgical methods are nowadays being developed and used for testing purposes, results show limited efficiency and high toxicity, even if they have the potential to damage cancer cells in the process. In contrast, magnetic hyperthermia is a field that originated from the use of magnetic nanomaterials, which, due to their magnetic properties and other characteristics, are used in many clinical trials as one of the solutions for cancer treatment. Magnetic nanomaterials can increase the temperature of nanoparticles located in tumor tissue by applying an alternating magnetic field. A very simple, inexpensive, and environmentally friendly method is the fabrication of various types of functional nanostructures by adding magnetic additives to the spinning solution in the electrospinning process, which can overcome the limitations of this challenging treatment process. Here, we review recently developed electrospun magnetic nanofiber mats and magnetic nanomaterials that support magnetic hyperthermia therapy, targeted drug delivery, diagnostic and therapeutic tools, and techniques for cancer treatment.

In Vitro Studies of Pegylated Magnetite Nanoparticles in a Cellular Model of Viral Oncogenesis: Initial Studies to Evaluate Their Potential as a Future Theranostic Tool

Magnetic nanosystems represent promising alternatives to the traditional diagnostic and treatment procedures available for different pathologies. In this work, a series of biological tests are proposed, aiming to validate a magnetic nanoplatform for Kaposi's sarcoma treatment. The selected nanosystems were polyethylene glycol-coated iron oxide nanoparticles (MAG.PEG), which were prepared by the hydrothermal method. Physicochemical characterization was performed to verify their suitable physicochemical properties to be administered in vivo. Exhaustive biological assays were conducted, aiming to validate this platform in a specific biomedical field related to viral oncogenesis diseases. As a first step, the MAG.PEG cytotoxicity was evaluated in a cellular model of Kaposi's sarcoma. By phase contrast microscopy, it was found that cell morphology remained unchanged regardless of the nanoparticles' concentration (1-150 µg mL^-1). The results, arising from the crystal violet technique, revealed that the proliferation was also unaffected. In addition, cell viability analysis by MTS and neutral red assays revealed a significant increase in metabolic and lysosomal activity at high concentrations of MAG.PEG (100-150 µg mL^-1). Moreover, an increase in ROS levels was observed at the highest concentration of MAG.PEG. Second, the iron quantification assays performed by Prussian blue staining showed that MAG.PEG cellular accumulation is dose dependent. Furthermore, the presence of vesicles containing MAG.PEG inside the cells was confirmed by TEM. Finally, the MAG.PEG steering was achieved using a static magnetic field generated by a moderate power magnet. In conclusion, MAG.PEG at a moderate concentration would be a suitable drug carrier for Kaposi's sarcoma treatment, avoiding adverse effects on normal tissues. The data included in this contribution appear as the first stage in proposing this platform as a suitable future theranostic to improve Kaposi's sarcoma therapy.

In silico evaluation of adverse eddy current effects in preclinical tests of magnetic hyperthermia

BACKGROUND AND OBJECTIVE

Magnetic hyperthermia is an oncological therapy that employs magnetic nanoparticles activated by alternating current (AC) magnetic fields with frequencies between 50 kHz and 1 MHz, to release heat in a diseased tissue and produce a local temperature increase of about 5 °C. To assess the treatment efficacy, in vivo tests on murine models (mice and rats) are typically performed. However, these are often carried out without satisfying the biophysical constraints on the electromagnetic (EM) field exposure, with consequent generation of hot spots and undesirable heating of healthy tissues. Here, we investigate possible adverse eddy current effects, to estimate AC magnetic field parameters (frequency and amplitude) that can potentially guarantee safe animal tests of magnetic hyperthermia.

METHODS

The analysis is performed through in silico modelling by means of finite element simulation tools, specifically developed to study eddy current effects in computational animal models, during magnetic hyperthermia treatments. The numerical tools enable us to locally evaluate the specific absorption rate (SAR) and the produced temperature increase, under different field exposure conditions.

RESULTS

The simulation outcomes demonstrate that in mice with weight lower than 30 g the thermal effects induced by AC magnetic fields are very weak, also when slightly overcoming the Hergt-Dutz limit, that is the product of the magnetic field amplitude and frequency should be lower than 5·10⁹ A/(m·s). Conversely, we observe significant temperature increases in 500 g rats, amplified when the field is applied transversally to the body longitudinal axis. A strong mitigation of side-effects can be achieved by introducing water boluses or by applying focused fields.

CONCLUSIONS

The developed physics-based modelling approach has proved to be a useful predictive tool for the optimization of preclinical tests of magnetic hyperthermia, allowing the identification of proper EM field conditions and the design of setups that guarantee safe levels of field exposure during animal treatments. In such contest, the obtained results can be considered as valid indicators to assess reference levels for animal testing of biomedical techniques that involve EM fields, like magnetic hyperthermia, thus complying with the Directive 2010/63/EU on the protection of animals used for scientific purposes.

Study on TiO2 Nanofilm That Reduces the Heat Production of Titanium Alloy Implant in Microwave Irradiation and Does Not Affect Fracture Healing

Background

Metal implants can produce heat and damage adjacent tissues under microwave irradiation, which makes local metal implants in the body a contraindication for microwave therapy. However, with the wide application of titanium alloy implants which have low permeability and low conductivity, this concept has been challenged. Our team members have confirmed through previous research that continuous low-power microwave irradiation does not cause thermal damage to the surrounding tissues of the titanium alloy. Is there any other way to further increase the dose of microwave irradiation while reducing the heat production of titanium alloy implants? In this study, the effect of TiO₂ nanofilm on reducing the heat production of titanium alloy implants in microwave field was verified by animal experiments, and the effect of TiO₂ nanofilm on fracture healing was observed.

Methods

30 rabbits were selected. In the experiment of temperature measurement, 10 rabbits were randomly divided into experimental group (n = 5) and control group (n = 5), and the contralateral lower limb of the rabbits in experimental group was set as the sham operation group. The right femurs in the experimental group were implanted with Ti6Al4V plates coated with TiO₂ nanofilm, and the right femurs in the control group were implanted with common titanium alloy plates without TiO₂ nanofilm. The same surgical procedure was used in the sham operation group, but no plate was implanted. The temperature of the deep tissue above the metal implant was measured with an anti-interference thermocouple thermometer during 20 minutes of microwave irradiation. The other 20 rabbits were randomly divided into two groups, experimental group (n = 10) and control group (n = 10). The femoral shaft fracture models were established again. Ti6Al4V plates coated with TiO₂ nanofilm and common titanium alloy plates were implanted in the two groups, respectively, and both groups were exposed to continuous microwave irradiation with a power of 40 W or 60 W for 30 days after operation. The fracture healing was evaluated by X-ray at 0 day, 14 days, and 30 days after microwave irradiation, respectively. The animals were sacrificed at 30 days after operation for histopathological assessment.

Results

The temperature in the experimental group, control group, and sham operation group increased significantly after 40 W and 60 W microwave irradiation (2.18 ± 0.15°C~6.02 ± 0.38°C). When exposed to 40 W microwave, the temperature rise of the control group was 4.0 ± 0.34°C, which was significantly higher than that of the experimental group 2.82 ± 0.15°C (P < 0.01) and the sham operation group 2.18 ± 0.33°C (P < 0.01). There was no significant difference in temperature rise between the experimental group and the sham operation group (P = 0.21). When exposed to 60 W microwave, the temperature rise of the control group was 6.02 ± 0.38°C, which was significantly higher than that of the experimental group 3.66 ± 0.14°C (P < 0.01) and sham operation group 2.96 ± 0.22°C (P < 0.01), and there was no significant difference between the experimental group and the sham operation group (P = 0.32). X-ray evaluation showed that there was no significant difference in callus maturity between the experimental group and the control group at 14 days (P = 0.554), but there was significant difference in callus maturity between the two groups at 30 days (P = 0.041). The analysis of bone histologic and histomorphometric data at 30 days was also consistent with this.

Conclusion

Under the animal experimental condition, compared with the common titanium alloy implant, the TiO₂ nanofilm can reduce the heat production of the titanium alloy implant in the 2450 MHz microwave field and has no adverse effect on fracture healing. This study opens up a promising new idea for the application of microwave therapy to metal implants in human body.