Recent Progress Regarding Materials and Structures of Triboelectric Nanogenerators for AR and VR

Multi-Attribute Triboelectric Materials and Innovative Applications Via TENGs

Triboelectric nanogenerators (TENGs) as an avant-garde technology that transforms mechanical energy into electrical energy, offering a new direction for green energy and sustainable development. By means of high-efficiency TENGs, conventional materials as new triboelectric materials have exhibited multi-attribute characteristics, achieving innovative applications in the field of micro-nano energy harvesting and self-powered sensing. The progress of TENGs technology with the triboelectric materials is complementary and mutually promoting. On the one hand, one of the cruxes of TENGs lies in the triboelectric materials, which have a decisive impact on their performance. On the other hand, as the research and application of TENGs continue to deepen, higher demands are placed on triboelectric materials, which in turn promotes the advancement of the entire material system as well as the fields of materials science and physics. This work aims to delve into the characteristics, types, preferred choices, and modification treatments of triboelectric materials on the performances of TENGs, hoping to provide guidance and insights for future research and applications.

Playing with Low Amounts of Expanded Graphite for Melt-Processed Polyamide and Copolyester Nanocomposites to Achieve Control of Mechanical, Tribological, Thermal and Dielectric Properties

Polyamide 11 (PA11) and copolyester (TPC-E) were compounded through melt extrusion with low levels (below 10%) of expanded graphite (EG), aiming at the manufacturing of a thermally and electrically conductive composite resistant to friction and with acceptable mechanical properties. Thermal characterisation showed that the EG presence had no influence on the onset degradation temperature or melting temperature. While the specific density of the produced composite materials increased linearly with increasing levels of EG, the tensile modulus and flexural modulus showed a significant increase already at the introduction of 1 wt% EG. However, the elongation at break decreased significantly for higher loadings, which is typical for composite materials. We observed the increase in the dielectric and thermal conductivity, and the dissipated power displayed a much larger increase where high frequencies (e.g., 10 GHz) were taken into account. The tribological results showed significant changes at 4 wt% for the PA11 composite and 6 wt% for the TPC-E composite. Morphological analysis of the wear surfaces indicated that the main wear mechanism changed from abrasive wear to adhesive wear, which contributes to the enhanced wear resistance of the developed materials. Overall, we manufactured new composite materials with enhanced dielectric properties and superior wear resistance while maintaining good processability, specifically upon using 4-6 wt% of EG.

Bioinspired nanoplatforms for human-machine interfaces: Recent progress in materials and device applications

The panoramic characteristics of human-machine interfaces (HMIs) have prompted the needs to update the biotechnology community with the recent trends, developments, and future research direction toward next-generation bioelectronics. Bioinspired materials are promising for integrating various bioelectronic devices to realize HMIs. With the advancement of scientific biotechnology, state-of-the-art bioelectronic applications have been extensively investigated to improve the quality of life by developing and integrating bioinspired nanoplatforms in HMIs. This review highlights recent trends and developments in the field of biotechnology based on bioinspired nanoplatforms by demonstrating recently explored materials and cutting-edge device applications. Section 1 introduces the recent trends and developments of bioinspired nanomaterials for HMIs. Section 2 reviews various flexible, wearable, biocompatible, and biodegradable nanoplatforms for bioinspired applications. Section 3 furnishes recently explored substrates as carriers for advanced nanomaterials in developing HMIs. Section 4 addresses recently invented biomimetic neuroelectronic, nanointerfaces, biointerfaces, and nano/microfluidic wearable bioelectronic devices for various HMI applications, such as healthcare, biopotential monitoring, and body fluid monitoring. Section 5 outlines designing and engineering of bioinspired sensors for HMIs. Finally, the challenges and opportunities for next-generation bioinspired nanoplatforms in extending the potential on HMIs are discussed for a near-future scenario. We believe this review can stimulate the integration of bioinspired nanoplatforms into the HMIs in addition to wearable electronic skin and health-monitoring devices while addressing prevailing and future healthcare and material-related problems in biotechnologies.

Self-Repairing and Energy-Harvesting Triboelectric Sensor for Tracking Limb Motion and Identifying Breathing Patterns

The increasing prevalence of health problems stemming from sedentary lifestyles and evolving workplace cultures has placed a substantial burden on healthcare systems. Consequently, remote health wearable monitoring systems have emerged as essential tools to track individuals' health and well-being. Self-powered triboelectric nanogenerators (TENGs) have exhibited significant potential for use as emerging detection devices capable of recognizing body movements and monitoring breathing patterns. However, several challenges remain to be addressed in order to fulfill the requirements for self-healing ability, air permeability, energy harvesting, and suitable sensing materials. These materials must possess high flexibility, be lightweight, and have excellent triboelectric charging effects in both electropositive and electronegative layers. In this work, we investigated self-healable electrospun polybutadiene-based urethane (PBU) as a positive triboelectric layer and titanium carbide (Ti3C2Tx) MXene as a negative triboelectric layer for the fabrication of an energy-harvesting TENG device. PBU consists of maleimide and furfuryl components as well as hydrogen bonds that trigger the Diels-Alder reaction, contributing to its self-healing properties. Moreover, this urethane incorporates a multitude of carbonyl and amine groups, which create dipole moments in both the stiff and the flexible segments of the polymer. This characteristic positively influences the triboelectric qualities of PBU by facilitating electron transfer between contacting materials, ultimately resulting in high output performance. We employed this device for sensing applications to monitor human motion and breathing pattern recognition. The soft and fibrous-structured TENG generates a high and stable open-circuit voltage of up to 30 V and a short-circuit current of 4 μA at an operation frequency of 4.0 Hz, demonstrating remarkable cyclic stability. A significant feature of our TENG is its self-healing ability, which allows for the restoration of its functionality and performance after sustaining damage. This characteristic has been achieved through the utilization of the self-healable PBU fibers, which can be repaired via a simple vapor solvent method. This innovative approach enables the TENG device to maintain optimal performance and continue functioning effectively even after multiple uses. After integration with a rectifier, the TENG can charge various capacitors and power 120 LEDs. Moreover, we employed the TENG as a self-powered active motion sensor, attaching it to the human body to monitor various body movements for energy-harvesting and sensing purposes. Additionally, the device demonstrates the capability to recognize breathing patterns in real time, offering valuable insights into an individual's respiratory health.

Editorial for Special Issue: Advanced Materials and Technologies in Nanogenerators

Nanogenerators, based on Maxwell's displacement current as the driving force, have inspired a new and developing field since their invention in 2006 [...].

Self-Powered Resistance-Switching Properties of Pr0.7Ca0.3MnO3 Film Driven by Triboelectric Nanogenerator

As one of the promising non-volatile memories (NVMs), resistive random access memory (RRAM) has attracted extensive attention. Conventional RRAM is deeply dependent on external power to induce resistance-switching, which restricts its applications. In this work, we have developed a self-powered RRAM that consists of a Pr0.7Ca0.3MnO3 (PCMO) film and a triboelectric nanogenerator (TENG). With a traditional power supply, the resistance switch ratio achieves the highest switching ratio reported so far, 9 × 107. By converting the mechanical energy harvested by a TENG into electrical energy to power the PCMO film, we demonstrate self-powered resistance-switching induced by mechanical movement. The prepared PCMO shows excellent performance of resistance switching driven by the TENG, and the resistance switch ratio is up to 2 × 105, which is higher than the ones ever reported. In addition, it can monitor real-time mechanical changes and has a good response to the electrical signals of different waveforms. This self-powered resistance switching can be induced by random movements based on the TENG. It has potential applications in the fields of self-powered sensors and human-machine interaction.