A Review of Advancing Two-Dimensional Material Membranes for Ultrafast and Highly Selective Liquid Separation

Editorial for the Special Issue "Preparation and Application of Advanced Functional Membranes"

Membrane science is a discipline that cuts across almost all fields of research and experimentation [...].

Review: chitosan-based biopolymers for anion-exchange membrane fuel cell application

Chitosan (CS)-based anion exchange membranes (AEMs) have gained significant attention in fuel cell applications owing to their numerous benefits, such as environmental friendliness, flexibility for structural alteration, and improved mechanical, thermal and chemical durability. This study aims to enhance the cell performance of CS-based AEMs by addressing key factors including mechanical stability, ionic conductivity, water absorption and expansion rate. While previous reviews have predominantly focused on CS as a proton-conducting membrane, the present mini-review highlights the advancements of CS-based AEMs. Furthermore, the study investigates the stability of cationic head groups grafted to CS through simulations. Understanding the chemical properties of CS, including the behaviour of grafted head groups, provides valuable insights into the membrane's overall stability and performance. Additionally, the study mentions the potential of modern cellulose membranes for alkaline environments as promising biopolymers. While the primary focus is on CS-based AEMs, the inclusion of cellulose membranes underscores the broader exploration of biopolymer materials for fuel cell applications.

Polycation-Intercalated MXene Membrane with Enhanced Permselective and Anti-Microbial Properties

Two-dimensional (2D) nanomaterial-based membranes feature attractive properties for molecular separation and transport, which exhibit huge potential in various chemical processes. However, the low permeability and bio-fouling of the MXene membrane in water treatment become huge obstacles to its practical application. Herein, a highly permselective and anti-bacterial 2D nanofiltration membrane is fabricated by intercalating a polycation of polydiallyldimethylammonium chloride (PDDA) into the Ti3C2Tx MXene laminar architecture through a facile and patternable electrostatic assembly strategy. As a result, the as-fabricated Ti3C2Tx/PDDA composite membrane exhibits higher water permeance up to 73.4 L m-2 h-1 with a rejection above 94.6% for MgCl2. The resultant membrane simultaneously possesses good resistance to swelling and long-term stability in water environments, even after 8 h. Additionally, the Ti3C2Tx/PDDA membrane also demonstrates a high flux recovery ratio of nearly 96.1% to bovine serum albumin proteins after being cleaned. More importantly, the current membrane shows excellent anti-adhesive and anti-microbial activity against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus), with inhibition rates of 90% and 95% against E. coli and S. aureus, respectively. This holds great potential for the application of the polyelectrolyte-intercalated MXene membrane in serving as a promising platform to separate molecules and/or ions in an aquatic environment.

Nanodiamond embedded polyaniline/polyvinylidene fluoride nanocomposites as microfiltration membranes for removal of industrial pollution

Membrane fouling remains a challenge to the membrane technology. Herein, we report the fabrication of composite membranes of polyaniline/polyvinylidene fluoride (PANI/PVDF) blended with nanodiamond (ND) with improved antifouling properties. The designed membranes were characterized by XRD, FTIR and SEM techniques. Characterization analysis revealed that addition of ND has maintained the structural integrity and porosity of composite membranes. The membrane permeation and antifouling performances were tested for hydrophilicity, porosity, pure water flux, shrinkage ratio, salt rejection of zinc acetate and copper acetate, and their fouling recovery ratio (FRR) measurements. A high solvent content ratio of 0.55 and a low shrinkage ratio of <12% due to enhanced hydrophilicity and porosity of the composite membrane with fouling-recovery of membranes to 88% were achieved. Separation of copper and zinc ions from aqueous solution was achieved. These findings imply that ND-based PANI/PVDF composite membranes can effectively serve as microfiltration membranes in industrial and municipal wastewater treatment.

Research on the Antibacterial Properties of MXene-Based 2D-2D Composite Materials Membrane

Novel MXene-based two-dimensional (2D) membranes are widely used for water purification due to their highly controllable structure and antibacterial properties. However, in the process of membrane separation, the problems of membrane fouling, especially biological fouling, limits the further application of MXene-based membranes. In this study, in order to improve the antibacterial and separation properties of membranes, three kinds of MXene-based 2D-2D composite membranes (M2~M4) were prepared using polyethersulfone (PES) as the substrate, which were GO@MXene, O-g-C₃N₄@MXene and BiOCl@MXene composite membranes respectively. The results showed that the antibacterial activity of M2~M4 against Escherichia coli and Staphylococcus aureus was further improved, especially the antibacterial ratio of M4 against Escherichia coli and Staphylococcus aureus was up to 50% and 82.4%, respectively. By comparing the surface morphology of MXene membrane and modified membrane treated bacteria through scanning electron microscopy (SEM), it was found that the cell density on modified membrane was significantly lower than that of pure MXene membrane.

Response of Bilayer and Trilayer Graphene to High-Energy Heavy Ion Irradiation

High-energy heavy ion irradiation is a very useful tool for the nanostructuring of 2D materials because defects can be introduced in a controlled way. This approach is especially attractive for the mass production of graphene nanomembranes when nanopore size and density can easily be tuned by ion irradiation parameters such as ion energy and applied fluence. Therefore, understanding the basic mechanisms in nanopore formation due to high-energy heavy ion impact is of the highest importance. In the present work, we used Raman spectroscopy to investigate the response of bilayer and trilayer graphene to this type of irradiation. Spectra obtained from graphene samples irradiated with 1.8 MeV I, 23 MeV I, 3 MeV Cu, 18 MeV Cu, and 12 MeV Si beams were analysed using the Lucchese model. It was found that the efficiency of damage production scales strongly with nuclear energy loss. Therefore, even for the most energetic 23 MeV I beam, the electronic energy loss does not contribute much to damage formation and ion tracks are unlikely to be formed.

Nanoporous Membranes for the Filtration of Proteins from Biological Fluids: Biocompatibility Tests on Cell Cultures and Suggested Applications for the Treatment of Alzheimer's Disease

BACKGROUND

Alzheimer's disease has a significant epidemiological and socioeconomic impact, and, unfortunately, the extensive research focused on potential curative therapies has not yet proven to be successful. However, in recent years, important steps have been made in the development and functionalization of nanoporous alumina membranes, which might be of great interest for medical use, including the treatment of neurodegenerative diseases. In this context, the aim of this article is to present the synthesis and biocompatibility testing of a special filtrating nano-membrane, which is planned to be used in an experimental device for Alzheimer's disease treatment.

METHODS

Firstly, the alumina nanoporous membrane was synthesized via the two-step anodizing process in oxalic acid-based electrolytes and functionalized via the atomic layer deposition technique. Subsequently, quality control tests (spectrophotometry and potential measurements), toxicity, and biocompatibility tests (cell viability assays) were conducted.

RESULTS

The proposed alumina nanoporous membrane proved to be efficient for amyloid-beta filtration according to the permeability studies conducted for 72 h. The proposed membrane has proven to be fully compatible with the tested cell cultures.

CONCLUSIONS

The proposed alumina nanoporous membrane model is safe and could be incorporated into implantable devices for further in vivo experiments and might be an efficient therapeutic approach for Alzheimer's disease.