Curcumin Sustained Release with a Hybrid Chitosan-Silk Fibroin Nanofiber Containing Silver Nanoparticles as a Novel Highly Efficient Antibacterial Wound Dressing

l-Carnosine loaded on carboxymethyl cellulose hydrogels for promoting wound healing

Wound management remains a challenge in clinical practice. Nowadays, patients have an increasing demand for wound repair with enhanced speed and quality; therefore, there is a great need to seek therapeutic strategies that can promote rapid and effective wound healing. In this study, we developed a carboxymethyl cellulose hydrogel loaded with l-carnosine (CRN@hydrogel) for potential application as a wound dressing. In vitro experiments confirmed that CRN@hydrogel can release over 80% of the drug within 48 h and demonstrated its favorable cytocompatibility and blood compatibility, thus establishing its applicability for safe utilization in clinical practice. Using a rat model, we found that this hydrogel could promote and accelerate wound healing more effectively. These results indicate that the novel hydrogel can serve as an efficient therapeutic strategy for wound treatment.

Intelligent electrospinning nanofibrous membranes for monitoring and promotion of the wound healing

The incidence of chronic wound healing is promoted by the growing trend of elderly population, obesity, and type II diabetes. Although numerous wound dressings have been studied over the years, it is still challenging for many wound dressings to perfectly adapt to the healing process due to the dynamic and complicated wound microenvironment. Aiming at an optimal reproduction of the physiological environment, multifunctional electrospinning nanofibrous membranes (ENMs) have emerged as a promising platform for the wound treatment owing to their resemblance to extracellular matrix (ECM), adjustable preparation processes, porousness, and good conformability to the wound site. Moreover, profiting from the booming development of human-machine interaction and artificial intelligence, a next generation of intelligent electrospinning nanofibrous membranes (iENMs) based wound dressing substrates that could realize the real-time monitoring of wound proceeding and individual-based wound therapy has evoked a surge of interest. In this regard, general wound-related biomarkers and process are overviewed firstly and representative iENMs stimuli-responsive materials are briefly summarized. Subsequently, the emergent applications of iENMs for the wound healing are highlighted. Finally, the opportunities and challenges for the development of next-generation iENMs as well as translating iENMs into clinical practice are evaluated.

Synthesis of biocomposites from microalgal peptide incorporated polycaprolactone/ κ- carrageenan nanofibers and their antibacterial and wound healing property

Antimicrobial peptides (AMPs) are promising novel agents for targeting a wide range of pathogens. In this study, microalgal peptides derived from native microalgae were incorporated into polycaprolactone (PCL) with ƙ-Carrageenan (ƙ-C) forming nanofibers using the electrospinning method. The peptides incorporated in the nanofibers were characterized by fourier infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy (SEM), and contact angle measurement. The results showed that peptides with molecular weights < 10 kDa, when loaded into nanofibers, exhibited lower wettability. The SEM analysis revealed a thin, smooth, interconnected bead-like structures. The antimicrobial activity of the electrospun nanofibers was evaluated through disc diffusion, and minimum inhibitory activity against Escherichia coli (MTTC 443), and Staphylococcus aureus (MTTC 96), resulting in zones of inhibition of 24 ± 0.5 mm and 14 ± 0.5 mm, respectively. The in vitro biocompatibility of the synthesized nanofibers was confirmed using in HEK 293 cell lines with an increased cell viability. Interestingly, the fibers also exhibited a significant wound-healing properties when used in vitro scratch assays. In conclusion, algal peptides incorporated with PCL/ ƙ-C were found to exhibit antimicrobial and biocompatible biomaterials for wound healing applications.

Modified in-vitro AATCC-100 procedure to measure viable bacteria from wound dressings

Chronic wounds are reoccurring healthcare problems in the United States and cost up to $50 billion annually. Improper wound care results in complications such as wound debridement, surgical amputation, and increased morbidity/ mortality due to opportunistic infections. To eliminate wound infections, many antimicrobial dressings are developed and submitted to FDA for evaluation. AATCC-100 is a standard method widely used to evaluate cloth wound dressings. This method, requires enrichment, followed by culturing to measure the concentration of culturable organisms; a caveat to this method could result in neglected viable but nonculturable (VBNC) bacteria and overestimate the antimicrobial properties of wound dressings. Therefore, the objectives of this study were to assess this accepted protocol with quantitative real-time polymerase chain reaction (qRT-PCR), to measure time dependent antimicrobial efficacy of wound dressing, and to examine for potential viable bacteria but non-culturable as compared with traditional plating methods. The test organisms included opportunistic pathogens: Pseudomonas aeruginosa (ATCC 15692) and Staphylococcus aureus (ATCC 43300). To mimic a wound dressing environment, samples of commercially available wound dressings (McKesson Inc.) with silver ion (positive control) and dressings without silver ion (positive control) were assessed under sterile conditions. All samples were examined by the original protocol (the extended AATCC-100 method) and qRT-PCR. The expression of specific housekeeping genes was measured (proC for P. aeruginosa and 16s rRNA for S. aureus). Based on these tests, log reduction of experimental conditions was compared to identify time dependent and precise antimicrobial properties from wound dressing samples. These results showed antimicrobial properties of wound dressings diminished as incubation days are increased for both methods from day 1 PCR result of 4.31 ± 0.54 and day 1 plating result of 6.31 ± 3.04 to day 3 PCR result of 1.22 ± 0.97 and day 3 plating result of 5.89 ± 2.41. These results show that data from qRT-PCR generally produced lower standard deviation than that of culture methods, hence shown to be more precise. Complementary parallel analysis of samples using both methods better characterized antimicrobial properties of the tested samples.

Electrospinning Silk-Fibroin-Based Fibrous Membranes with AgNPs for Antimicrobial Application

Silk fibroin (SF) has excellent biocompatibility and is one of the most commonly used polymer materials. However, SF fibers have serious drawbacks as antibacterial materials due to their lack of stability and bacterial resistance. Therefore, it is of paramount significance to enhance the stability and bolster the bacterial resistance of SF fibers. In this study, SF fibers were fabricated and loaded with Ag nanoparticles (AgNPs) to improve the antimicrobial properties of the fibers. The impact of reduction conditions on the size of AgNPs was also investigated. In an antibacterial test, the fibers that were prepared exhibited over 98% bacterial resistance against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Therefore, as an efficient antibacterial material, these fibers are expected to become a candidate material in medical and textile fields. This study offers a novel approach for the utilization of SF fibers in the realm of antibacterial applications.

Applications and Potentials of a Silk Fibroin Nanoparticle Delivery System in Animal Husbandry

Silk fibroin (SF), a unique natural polymeric fibrous protein extracted from Bombyx mori cocoons, accounts for approximately 75% of the total mass of silk. It has great application prospects due to its outstanding biocompatibility, biodegradability, low immunogenicity, and mechanical stability. Additionally, it is non-toxic and environmentally friendly. Nanoparticle delivery systems constructed with SF can improve the bioavailability of the carriers, increase the loading rates, control the release behavior of the deliverables, and enhance their action efficiencies. Animal husbandry is an integral part of agriculture and plays a vital role in the development of the rural economy. However, the pillar industry experiences a lot of difficulties, like drug abuse while treating major animal diseases, and serious environmental pollution, restricting sustainable development. Interestingly, the limited use cases of silk fibroin nanoparticle (SF NP) delivery systems in animal husbandry, such as veterinary vaccines and feed additives, have shown great promise. This paper first reviews the SF NP delivery system with regard to its advantages, disadvantages, and applications. Moreover, we describe the application status and developmental prospects of SF NP delivery systems to provide theoretical references for further development in livestock production and promote the high-quality and healthy development of animal husbandry.

Improved cell growth on additively manufactured Ti64 substrates with varying porosity and nanofibrous coating

3T3 Swiss albino mouse cells are often used in biotechnological applications. These cells can grow adherently on suitable surfaces. In our study, they were grown on different titanium substrates, comparing commercially available titanium sheets of grade 1 and grade 2, respectively, with Ti64 which was 3D printed with different porosity in order to identify potential substitutes for common well-plates, which could - in case of 3D printed substrates - be produced in various shapes and dimensions and thus broaden the range of substrates for cell growth in biotechnology and tissue engineering. In addition, thin layers of poly(acrylonitrile) (PAN) nanofibers were electrospun on these substrates to add a nanostructure. The common titanium sheets showed lower cell cover factors than common well plates, which could not be improved by the thin nanofibrous coating. However, the Ti sheets with nanofiber mat coatings showed higher cell adhesion and proliferation than pure PAN nanofiber mats. The 3D printed Ti64 substrates prepared by laser metal fusion, on the other hand, enabled significantly higher proliferation of (66 ± 8)% cover factor after three days of cell growth than well plates which are usually applied as the gold standard for cell cultivation ((48 ± 11)% cover factor under identical conditions). Especially the Ti64 samples with higher porosity showed high cell adhesion and proliferation. Our study suggests investigating such porous Ti64 samples further as a potential future optimum for cell adhesion and proliferation.

Silk Fibroin Materials: Biomedical Applications and Perspectives

The golden rule in tissue engineering is the creation of a synthetic device that simulates the native tissue, thus leading to the proper restoration of its anatomical and functional integrity, avoiding the limitations related to approaches based on autografts and allografts. The emergence of synthetic biocompatible materials has led to the production of innovative scaffolds that, if combined with cells and/or bioactive molecules, can improve tissue regeneration. In the last decade, silk fibroin (SF) has gained attention as a promising biomaterial in regenerative medicine due to its enhanced bio/cytocompatibility, chemical stability, and mechanical properties. Moreover, the possibility to produce advanced medical tools such as films, fibers, hydrogels, 3D porous scaffolds, non-woven scaffolds, particles or composite materials from a raw aqueous solution emphasizes the versatility of SF. Such devices are capable of meeting the most diverse tissue needs; hence, they represent an innovative clinical solution for the treatment of bone/cartilage, the cardiovascular system, neural, skin, and pancreatic tissue regeneration, as well as for many other biomedical applications. The present narrative review encompasses topics such as (i) the most interesting features of SF-based biomaterials, bare SF's biological nature and structural features, and comprehending the related chemo-physical properties and techniques used to produce the desired formulations of SF; (ii) the different applications of SF-based biomaterials and their related composite structures, discussing their biocompatibility and effectiveness in the medical field. Particularly, applications in regenerative medicine are also analyzed herein to highlight the different therapeutic strategies applied to various body sectors.

Silk fibroin-derived electrospun materials for biomedical applications: A review

Electrospinning is a versatile technique for fabricating polymeric fibers with diameters ranging from micro- to nanoscale, exhibiting multiple morphologies and arrangements. By combining silk fibroin (SF) with synthetic and/or natural polymers, electrospun materials with outstanding biological, chemical, electrical, physical, mechanical, and optical properties can be achieved, fulfilling the evolving biomedical demands. This review highlights the remarkable versatility of SF-derived electrospun materials, specifically focusing on their application in tissue regeneration (including cartilage, cornea, nerves, blood vessels, bones, and skin), disease treatment (such as cancer and diabetes), and the development of controlled drug delivery systems. Additionally, we explore the potential future trends in utilizing these nanofibrous materials for creating intelligent biomaterials, incorporating biosensors and wearable sensors for monitoring human health, and also discuss the bottlenecks for its widespread use. This comprehensive overview illuminates the significant impact and exciting prospects of SF-derived electrospun materials in advancing biomedical research and applications.

Microcurrent Cloth-Assisted Transdermal Penetration and Follicular Ducts Escape of Curcumin-Loaded Micelles for Enhanced Wound Healing

Purpose

Larger nanoparticles of bioactive compounds deposit high concentrations in follicular ducts after skin penetration. In this study, we investigated the effects of microcurrent cloth on the skin penetration and translocation of large nanoparticle applied for wound repair applications.

Methods

A self-assembly of curcumin-loaded micelles (CMs) was prepared to improve the water solubility and transdermal efficiency of curcumin. Microcurrent cloth (M) was produced by Zn/Ag electrofabric printing to facilitate iontophoretic transdermal delivery. The transdermal performance of CMs combined with M was evaluated by a transdermal system and confocal microscopy. The CMs/iontophoretic combination effects on nitric oxide (NO) production and inflammatory cytokines were evaluated in Raw 264.7 cells. The wound-healing property of the combined treatment was assessed in a surgically created full-thickness circular wound mouse model.

Results

Energy-dispersive X-ray spectroscopy confirmed the presence of Zn/Ag on the microcurrent cloth. The average potential of M was measured to be +214.6 mV in PBS. Large particle CMs (CM-L) prepared using surfactant/cosurfactant present a particle size of 142.9 nm with a polydispersity index of 0.319. The solubility of curcumin in CM-L was 2143.67 μg/mL, indicating 250-fold higher than native curcumin (8.68 μg/mL). The combined treatment (CM-L+M) demonstrated a significant ability to inhibit NO production and increase IL-6 and IL-10 secretion. Surprisingly, microcurrent application significantly improved 20.01-fold transdermal performance of curcumin in CM-L with an obvious escape of CM-L from follicular ducts to surrounding observed by confocal microscopy. The CM-L+M group also exhibited a better wound-closure rate (77.94% on day 4) and the regenerated collagen intensity was approximately 2.66-fold higher than the control group, with a closure rate greater than 90% on day 8 in vivo.

Conclusion

Microcurrent cloth play as a promising iontophoretic transdermal drug delivery accelerator that enhances skin penetration and assists CMs to escape from follicular ducts for wound repair applications.

Metal nanoparticles and carbohydrate polymers team up to improve biomedical outcomes

The convergence of carbohydrate polymers and metal nanoparticles (MNPs) holds great promise for biomedical applications. Researchers aim to exploit the capability of carbohydrate matrices to modulate the physicochemical properties of MNPs, promote their therapeutic efficiency, improve targeted drug delivery, and enhance their biocompatibility. Therefore, understanding various attributes of both carbohydrates and MNPs is the key to harnessing them for biomedical applications. The many distinct types of carbohydrate-MNP systems confer unique capabilities for drug delivery, wound healing, tissue engineering, cancer treatment, and even food packaging. Here, we introduce distinct physicochemical/biological properties of carbohydrates and MNPs, and discuss their potentials and shortcomings (alone and in combination) for biomedical applications. We then offer an overview on carbohydrate-MNP systems and how they can be utilized to improve biomedical outcomes. Last but not least, future perspectives toward the application of such systems are highlighted.

Electrospun fibers for the treatment of skin diseases

Skin diseases are among the most common diseases in the global population and with the growth of the aging population, they represent an increasing burden to healthcare systems worldwide. Even though they are rarely life-threatening, the suffering for those affected is high due to the visibility and physical discomfort related to these diseases. Typical symptoms of skin diseases include an inflamed, swollen or itchy skin, and therefore, there is a high demand for effective therapy options. In recent years, electrospinning has attracted considerable interest in the field of drug delivery. The technique allows producing multifunctional drug-loaded fibrous patches from various natural and synthetic polymers with fiber diameters in the nano- and micrometer range, suitable for the treatment of a wide variety of skin diseases. The great potential of electrospun fiber patches not only lies in their tunable drug release properties and the possibility to entrap a variety of therapeutic compounds, but they also provide physical and mechanical protection to the impaired skin area, exhibit a high surface area, allow gas exchange, absorb exudate due to their porous structure and are cytocompatible and biodegradable. In the case of wound healing, cell adhesion is promoted due to the resemblance of the electrospun fibers to the structure of the native extracellular matrix. This review gives an overview of the potential applications of electrospun fibers in skin therapy. In addition to the treatment of bacterial, diabetic and burn wounds, focus is placed on inflammatory diseases such as atopic dermatitis and psoriasis, and therapeutic options for the treatment of skin cancer, acne vulgaris and herpes labialis are discussed. While we aim to emphasize the great potential of electrospun fiber patches for the treatment of skin diseases with this review paper, we also highlight challenges and limitations of current research in the field.

Fabrication of an Artificial Pulley Based on Electrospun Composite Polyurethane/Polycaprolactone Nanofibers for Hand Surgery: Structural, Mechanical, In Vitro, and In Vivo Examinations

Injuries to the hand's flexor pulley system can be debilitating, causing pain and restricting movement of the affected finger(s). The creation of a biocompatible artificial pulley could potentially alleviate some of the complications associated with current surgical treatments. In this study, a biocompatible artificial pulley was fabricated by using polycaprolactone (PCL) and polyurethane (PU) in the form of an electrospun nanofiber structure. All scaffolds were structurally analyzed using FESEM imaging, porosity, FTIR, and DSC examinations. Mechanical properties were evaluated, and in vitro studies were conducted on the degradation rate, swelling ratio, and toxicity. Immune response to fabricated scaffolds was evaluated by implanting them under the skin of rats for further pathological examination. All scaffolds exhibited a nanoscale structure and high porosity without any undesirable functional groups. The 25% PCL scaffold showed 17%, 20%, 80%, 17%, and 70% significant increases in Fmax, final stress, final strain, Young's modulus, and elongation percentage, respectively. In fact, the PCL25% scaffold demonstrated more than 100% improvement in mechanical properties compared to those of A2 and A4 natural pulleys. Additionally, all scaffold structures showed cell viability similar to that of the control sample. The study suggests that scaffolds made of 25% PCL hold promise as effective artificial pulleys for reconstructing the flexor tendon pulley system in cases of injury.

Enhanced immune responses in dexamethasone immunosuppressed male rats supplemented with herbal extracts, chitosan nanoparticles, and their conjugates

Nowadays, the world is challenged with highly contagious diseases, one of their preliminary virulence mechanisms is the suppression of innate immunity. Therefore, promoting natural immunity is a good precautionary strategy. we investigated and compared the effects of several natural herbal extracts -Moringa oleifera, Ziziphus spina christi, and Saussurea costus, and chitosan nanoparticles (CS NPs)- as well as conjugated extracts with CS NPs on the immunological parameters of dexamethasone immunosuppressed (IS) male rats. The plant extracts were assessed for total flavonoids, phenolics, and antioxidant activity. The CS NPs and their conjugates were characterized using particles size, zeta potentials, and Fourier-transform infrared spectroscopy analyses. The chemical analysis of the plant extracts, CS NPs, and their conjugates was performed using energy dispersive X-ray fluorescence, and their cytotoxicity was evaluated in human lung fibroblast (WI-38) and human embryonic kidney (HEK-293) cell lines. For in vivo evaluations, 72 adult male rats were divided into 9 groups: control, IS, three plant extracts, CS, and conjugates of the three plant extracts and CS NPs. Oral supplementation (day after day) lasted for 28 days. Liver, kidney, and spleen tissue samples were collected for histopathology and Ki-67 expression analyses. The results revealed that the plant extracts and CS improved the total leukocyte counts, complement 3, complement 4, interferon-gamma, and tumor necrosis factor levels at day 28. However, the plant extract-CS NPs conjugates faster and have higher immunostimulatory effects at day 14. Furthermore, the atrophied white pulp of the spleen induced by dexamethasone was alleviated, and Ki-67 expression was elevated in all the treated groups. Conclusively, the conjugates of Moringa oleifera, Ziziphus spina christi, and Saussurea costus extract with CS NPs demonstrated more potent and rapid immune responses at lower doses and concentrations compared to the plant extracts or CS NPs alone, without causing liver or kidney injuries. Thus, supplementation of these conjugated plant extracts at lower doses and concentrations is recommended to improve immunity while considering safety considerations.

Electrospun core-sheath PCL nanofibers loaded with nHA and simvastatin and their potential bone regeneration applications

Introduction: Drugs and biocompatible nanoparticles have raised significant potential in advancing the bone regeneration. Electrospinning technology enables the full realization of the value of drugs and nanoparticles. Methods: In this study, we have successfully fabricated core-sheath nanofibers solely composed of polycaprolactone (PCL) polymer. Simvastatin (SIM) was confined to the core of the nanofibers while nanohydroxyapatite (nHA) was loaded on the nanofiber surface. Results: All the prepared nanofibers exhibited a cylindrical micromorphology, and the core-sheath structure was exploited using a Transmission Electron Microscope. X-ray pattern results indicated that SIM was in an amorphous state within nanofibers, while Fourier Transform InfraRed spectroscopy showed excellent chemical compatibility among SIM, nHA, and PCL. The actual loading of nHA within the nanofiber was determined by a thermogravimetric test due to the high melting point of nHA. Core-sheath nanofibers could release SIM for 672 h, which was attributed to the core-sheath structure. Furthermore, nanofibers loaded with SIM or nHA had a positive impact on cell proliferation, with the core-sheath nanofibers displaying the most favorable cell proliferation behavior. Discussion: Such a synergistic facilitation strategy based on materials and nanostructure may encourage researchers to exploit new biomedical materials in future.

Self-Sanitizing Polycaprolactone Electrospun Nanofiber Membrane with Ag Nanoparticles

The objective of this research was to develop an environment-friendly and scalable method for the production of self-sanitizing electrospun nanofibers. This was achieved by immobilizing silver nanoparticles (Ag NPs) onto plasma-treated surfaces of biodegradable polycaprolactone (PCL) nanofibers. The plasma deposited polymer layer containing carboxyl groups played a critical role in providing a uniform distribution of Ag NPs on the nanofiber surface. Ag ions were absorbed by electrostatic interaction and then reduced under the action of UV-light. The concentration and release of Ag ions were analyzed using the EDXS/XPS and ICP AES methods, respectively. Although high levels of Ag ions were detected after 3 h of immersion in water, the material retained a sufficient amount of silver nanoparticles on the surface (~2.3 vs. 3.5 at.% as determined by XPS), and the release rate subsequently decreased over the next 69 h. The antipathogenic properties of PCL-Ag were tested against gram-negative and gram-positive bacteria, fungi, and biofilm formation. The results showed that the PCL-Ag nanofibers exhibit significant antimicrobial activity against a wide range of microorganisms, including those that cause human infections. The incorporation of Ag NPs into PCL nanofibers resulted in a self-sanitizing material that can be used in variety of applications, including wound dressings, water treatment, and air filtration. The development of a simple, scalable, and environmentally friendly method for the fabrication of these nanofibers is essential to ensure their widespread use in various industries. The ability to control the concentration and release rate of Ag ions in the PCL nanofibers will be critical to optimize their efficacy while minimizing their potential toxicity to human cells and the environment.

Investigation of the antitumor effect on breast cancer cells of the electrospun amygdalin-loaded poly(l-lactic acid)/poly(ethylene glycol) nanofibers

In this study, PLA/PEG nanofibers (NFs) loaded with amygdalin (AMG) and bitter almond kernels extract were produced by electrospinning to prevent local breast cancer recurrence, and the effect of produced NFs on the MCF-7 cell line was investigated in vitro. The electrospun NFs were characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), thermal analysis (DSC) and tensile strength and physical analyzes were performed. Loading of AMG to nanofibers increased fiber diameters from 827.93 ± 174.507 nm to 1855.32 ± 291.057 μm. When drug release results were analyzed, the NFs showed a controlled release profile extending up to 10 h. The encapsulation efficiency of AMG-loaded NFs was calculated at 100 ± 0,01 %, 94 ± 0,02 %, and 88 ± 0,02 %. When in vitro cytotoxicity results were analyzed, showed that all NFs are effective in inducing cytotoxicity against MCF-7 breast cancer cells. Importantly, 20 mg AMG-loaded NFs displayed effectively higher cytotoxic effects against breast cancer cells relative to the other NFs. Considering all the results, AMG-loaded NFs can give sustained release of drugs at the local sites. Therefore, AMG-loaded nanofibers can reduce the risk of local recurrence of cancer after surgery and can be directly implanted into solid tumor cells for treatment.

Metal-Polymer Nanocomposites: A Promising Approach to Antibacterial Materials

There has been a new approach in the development of antibacterials in order to enhance the antibacterial potential. The nanoparticles are tagged on to the surface of other metals or metal oxides and polymers to achieve nanocomposites. These have shown significant antibacterial properties when compared to nanoparticles. In this article we explore the antibacterial potentials of metal-based and metal-polymer-based nanocomposites, various techniques which are involved in the synthesis of the metal-polymer, nanocomposites, mechanisms of action, and their advantages, disadvantages, and applications.

Carboxymethyl cellulose/starch/reduced graphene oxide composite as a pH-sensitive nanocarrier for curcumin drug delivery

Nanocomposites are promising drug carriers to treat terminal cancers with few adverse effects. Herein, nanocomposite hydrogels composed of carboxymethyl cellulose (CMC)/starch/reduced graphene oxide (RGO) were synthesized via a green chemistry approach and then encapsulated in double nanoemulsions to act as pH-responsive delivery systems for curcumin, a potential antitumor drug. A water/oil/water nanoemulsion containing bitter almond oil served as a membrane surrounding the nanocarrier to control drug release. DLS and zeta potential measurements were used to estimate the size and confirm the stability of curcumin-loaded nanocarriers. The intermolecular interactions, crystalline structure and morphology of the nanocarriers were analyzed through FTIR spectroscopy, XRD and FESEM, respectively. The drug loading and entrapment efficiencies were significantly improved compared to previously reported curcumin delivery systems. In vitro release experiments demonstrated the pH-responsiveness of the nanocarriers and the faster curcumin release at a lower pH. The MTT assay revealed the increased toxicity of the nanocomposites against MCF-7 cancer cells compared to CMC, CMC/RGO or free curcumin. Apoptosis was detected in MCF-7 cells via flow cytometry tests. The results obtained herein support that the developed nanocarriers are stable, uniform and effective delivery systems for a sustained and pH-sensitive curcumin release.

Green synthesized polyvinylpyrrolidone/titanium dioxide hydrogel nanocomposite modified with agarose macromolecules for sustained and pH-responsive release of anticancer drug

Cancer, as one of the most challenging diseases of the last century, has a significant number of patients and deaths every year. Various strategies have been explored for the treatment of cancer. Chemotherapy is one of the methods of treating cancer. Doxorubicin is one of the compounds used in chemotherapy to kill cancer cells. Due to their unique properties and low toxicity, metal oxide nanoparticles are effective in combination therapy and increase the effectiveness of anti-cancer compounds. The limited in vivo circulatory period, poor solubility, and inadequate penetration of doxorubicin (DOX) restrict its use in cancer treatment, notwithstanding its attractive characteristics. It is possible to circumvent some of the difficulties in cancer therapy by using green synthesized pH-responsive nanocomposite consisting of polyvinylpyrrolidone (PVP), titanium dioxide (TiO₂) modified with agarose (Ag) macromolecules. TiO₂ incorporation into the PVP-Ag nanocomposite resulted in limited increased loading and encapsulation efficiencies from 41 % to 47 % and 84 % to 88.5 %, respectively. DOX diffusion among normal cells is prevented by the PVP-Ag-TiO₂ nanocarrier at pH = 7.4, though the acidic intracellular microenvironments activate the PVP-Ag-TiO₂ nanocarrier at pH = 5.4. Characterization of the nanocarrier was performed using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrophotometry, field emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), and zeta potential. The average particle size and the zeta potential of the particles showed values of 349.8 nm and +57 mV, respectively. In vitro release after 96 h showed a release rate of 92 % at pH 7.4 and a release rate of 96 % at pH 5.4. Meanwhile, the initial release after 24 h was 42 % for pH 7.4 and 76 % for pH 5.4. As shown by an MTT analysis on MCF-7 cells, the toxicity of DOX-loaded PVP-Ag-TiO₂ nanocomposite was substantially greater than that of unbound DOX and PVP-Ag-TiO₂. After integrating TiO₂ nanomaterials into the PVP-Ag-DOX nanocarrier, flow cytometry data showed a greater stimulation of cell death. These data indicate that the DOX-loaded nanocomposite is a suitable alternative for drug delivery systems.

Silver Nanoparticles Loaded on Chitosan-g-PVA Hydrogel for the Wound-Healing Applications

Silver nanoparticle composites have abundant biomedical applications due to their unique antibacterial properties. In the current work, green tea leaf extract was used as a natural reducing agent to synthesize AgNPs (AgNPs) using microwave irradiation technology. Furthermore, microwave irradiation has been used for the preparation of AgNPs/chitosan (Ch) grafted polyvinyl alcohol (PVA) hydrogel samples. To approve the accomplishment of AgNPs hydrogel polymer, UV-spectrum, TEM, and FT-IR spectrum analyses and the release of silver ions, actions were taken. The wound-healing ability of the prepared hydrogel samples was measured via both the in vitro (fibroblast cells) and the in vivo using rat models. It was found that chitosan-grafted polyvinyl alcohol, including AgNPs, exhibited excellent antibacterial activity against E. coli and S. aureus using the agar diffusion method. It can be said that microwave irradiation was successful in creating a hydrogel that contained silver nanoparticles. A wound that was still open was successfully treated with these composites.

A nanofiber/sponge double-layered composite membrane capable of inhibiting infection and promoting blood coagulation during wound healing

Uncontrolled bleeding and bacterial infections cause severe damage to the wounds and remain a clinical challenge. Here, we developed a nanofiber/sponge bilayered composite membrane (QCP) containing quaternized silicone (QP12) and quaternized chitosan (QCS12) by joint approaches of electrospinning and freeze-drying and investigated their potential for wound dressing. The QCP was composed of a sponge (QCC) containing collagen (COL) and QCS12 and a nanofibrous membrane (MQP) containing poly-ε-caprolactone (PCL) and QP12. The QCP composite membrane possessed feasible permeability (0.22 ± 0.01 g/(cm²·24 h)), available thermal stability, suitable mechanical properties with natural skin, and in vivo hemostatic efficiency. The bonds of the N-quaternary and Schiff base endow composite membranes with significant anti-microbial invasion, potentially enhancing the wound healing process with an eligible microenvironment. Meanwhile, QCP evinced fine hemocompatibility, low cytotoxicity, negligible skin irritation, and other desirable biosafety as an excellent wound dressing. QCP promoted collagen deposition and re-epithelization to accelerate healing and suppress scars in the full-thickness acute wound models. Furthermore, the evaluation in the chronic skin incision model of diabetes mellitus manifested high healing efficiency with a certain resistance to bacterial infection of the composite membrane. Taken together, the QCP composite membrane may be a potential antibacterial and hemostatic wound dressing.

Biopolymer Composites 2022

Recently, sustainable, biodegradable, and nontoxic materials, especially from renewable resources, have gained a lot of attention, and an important effort has been put into the research of biodegradable and biocompatible polymers as an alternative to petroleum-based commodity plastics [...].

pH-Responsive wound dressings: advances and prospects

Wound healing is a complex and dynamic process, in which the pH value plays an important role in reflecting the wound status. Wound dressings are materials that are able to accelerate the healing process. Among the multifunctional advanced wound dressings developed in recent years, pH-responsive wound dressings, especially hydrogels, show great potential owing to their unique properties of adjusting their functions according to the wound conditions, thereby allowing the wound to heal in a regulated manner. However, a comprehensive review of pH-responsive wound dressings is lacking. This review summarizes the design strategies and advanced functions of pH-responsive hydrogel wound dressings, including their excellent antibacterial properties and significant pro-healing abilities. Other advanced pH-responsive materials, such as nanofibers, composite films, nanoparticle clusters, and microneedles, are also classified and discussed. Next, the pH-monitoring functions of pH-responsive wound dressings and the related pH indicators are summarized in detail. Finally, the achievements, challenges, and future development trends of pH-responsive wound dressings are discussed.

Assessment of synthesized chitosan/halloysite nanocarrier modified by carbon nanotube for pH-sensitive delivery of curcumin to cancerous media

Constructing a system to carry medicine for more effective remedy of cancer has been a leading challenge, as the number of cancer cases continues to increase. In this present research, a curcumin-loaded chitosan/halloysite/carbon nanotube nanomixture was fabricated by means of water/oil/water emulsification method. The drug loading efficiency (DL) and entrapment efficiency (EE), as a result, reached 42 % and 88 %, respectively and FTIR and XRD analysis confirmed the bonding between the drug and nanocarrier. Morphological observation through FE-SEM and characterization through DLS analysis demonstrated that the average size of nanoparticles is 267.37 nm. Assessment of release within 96 h in pH 7.4 and 5.4 showed sustained release. For more investigation, release data was analyzed by diverse kinetic models to understand the mechanism in the release procedure. An MTT assay was also carried out, and the results illustrated apoptosis induction on MCF-7 cells and exhibited ameliorated cytotoxicity of the drug-loaded nanocomposite compared to the free curcumin. These findings suggest that the unique pH-responsive chitosan/halloysite/carbon nanotube nanocomposite might make a good option for drug delivery systems, particularly for the cancer treatment.

Chitosan/silica: A hybrid formulation to mitigate phytopathogens

Long-term and indiscriminate use of synthetic pesticides to mitigate plant pathogens have created serious issues of water health, soil contamination, non-target organisms, resistant species, and unpredictable environmental and human health hazards. These constraints have forced scientists to develop alternative plant disease management strategies to reduce synthetic chemical' dependency. During the last 20 years, biological agents and resistance elicitors have been the most important used alternatives. Silica-based materials/chitosan with a dual mode of action have been proposed as promising alternatives to prevent plant diseases through direct and indirect mechanisms. Moreover, the combined application of nano-silica and chitosan, due to their controllable morphology, high loading capacity, low toxicity, and efficient encapsulation, act as suitable carriers for biological agents, pesticides, and essential oils, making them proper candidates for mitigation of phytopathogens. Based on this potential, this literature study reviewed the silica and chitosan properties and their function in the plant. It also assessed their role in the fighting against soil and aerial phytopathogens, directly and indirectly, as novel hybrid formulations in future managing platforms.

Estrogen adsorption from an aqueous solution on the chitosan nanoparticles

In this research, chitosan nanoparticles as an efficient and reusable adsorbent with adsorption capacity of 5.79 mg/g, surface area of 62 m²/g and pH_pzc of 8.07 were applied to remove the ethinylestradiol (as a sample of estrogen) from an aqueous wastewater. The chitosan nanoparticles were characterized by SEM, XRD and FT-IR analyses. Four independent variables involving contact time, adsorbent dosage, pH, and initial concentration of estrogen were applied to design the experiments by Design Expert software (CCD under RSM). In fact, number of experiments was minimized and the operating conditions were optimized for the maximum estrogen removal. The results indicated that three independent variables (contact time, adsorbent dosage, and pH) increment increased the estrogen removal while the estrogen initial concentration enhancement decreased the removal due to the concentration polarization phenomenon. The optimum conditions for the estrogen removal (92.50 %) on the chitosan nanoparticles were found at contact time of 220 min, adsorbent dosage of 1.45 g/l, pH of 7.3 and estrogen initial concentration of 5.7 mg/l. Moreover, the Langmuir isotherm and pseudo-second order models could properly legitimize estrogen adsorption process on the chitosan nanoparticles.

Synthesis of a novel pH-responsive Fe3O4/chitosan/agarose double nanoemulsion as a promising Nanocarrier with sustained release of curcumin to treat MCF-7 cell line

Nanotechnology, using drug carriers, has gained remarkable achievements in treating cancer by inhibiting the adverse effects of traditional therapeutic methods, such as applying curcumin. Using chitosan could help to target tumors, without harming healthy cells. Also, magnetic iron oxide provides a high specific area to increase the capability of the nano-scale vehicle to load curcumin. A double emulsion hydrogel of Fe₃O₄/chitosan/agarose was synthesized and curcumin was loaded with loading and entrapment efficacies of 48.25 % and 87.5 %, respectively. The crystalline nature of the nanocomposites was confirmed by X-ray diffraction, and Fourier transforms spectroscopy investigated the functional groups of the components. The results of DLS and zeta potential showed proper particle size and surface charge, which are important for making the EPR effect and stability of the developed drug delivery system. The release profile of curcumin from the nanocarrier presented a sustained and pH-responsive release, avoiding overdosage and decreasing side effects. The best kinetic model that the release data could be fitted on was Hixon-Crowell. Finally, from the cytotoxicity of the prepared nanocomposite, it was concluded that the nanocarrier is biocompatible, and from flow cytometry analysis, a high apoptosis percentage proved that the effect of the designed drug delivery system on MCF-7 cell lines is programmed. Hence, this curcumin-loaded double emulsion could mitigate cancer therapy restrictions, with a minimum toxic effect on cultured cells.

Synthesis and characterization of a novel, pH-responsive sustained release nanocarrier using polyethylene glycol, graphene oxide, and natural silk fibroin protein by a green nano emulsification method to enhance cancer treatment

In this study, for the first time, by employing a simple and efficient double nano-emulsification method and using sweet almond oil as the organic phase, polyethylene glycol (PEG)/graphene oxide (GO)/silk fibroin (SF) hydrogel-nanocomposite was synthesized. The aim of the research was to fabricate a biocompatible targeted pH-sensitive sustained release carrier, improve the drug loading capacity and enhance the anticancer effect of doxorubicin (DOX) drug. The obtained values for the entrapment (%EE) and loading efficacy (%LE) were 87.75 ± 0.7 % and 46 ± 1 %, respectively, and these high values were due to the use of GO with a large specific surface area and the electrostatic interaction between the drug and SF. The Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analyses confirmed the presence of all the components in the nanocomposite and the suitable interaction between them. Based on the results of dynamic light scattering analysis (DLS) and zeta potential analysis, the mean size of the carrier particles and its surface charge were 293.7 nm and -102.9 mV, respectively. The high negative charge was caused by the presence of hydroxyl groups in GO and SF and it caused proper stability of the nanocomposite. The spherical core-shell structure with its homogeneous surface was also observed in the field emission scanning electron microscopy (FE-SEM) image. The cumulative release percentage of the nanocarrier reached 95.75 after 96 h and it is higher in the acidic environment at all times. The results of fitting the release data to the kinetic models suggested that the mechanism of release was dissolution-controlled anomalous at pH 7.4 and diffusion-controlled anomalous at pH 5.4. The results of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay and flow cytometry showed an increase in toxicity on MCF-7 cells and improved apoptotic cell death compared to the free drug. Consequently, the findings of this research introduced and confirmed PEG/GO/SF nanocomposite as an attractive novel drug delivery system for pH-sensitive and sustained delivery of chemotherapeutic agents in biomedicine.

Role of Iron Oxide (Fe2O3) Nanocomposites in Advanced Biomedical Applications: A State-of-the-Art Review

Nanomaterials have demonstrated a wide range of applications and recently, novel biomedical studies are devoted to improving the functionality and effectivity of traditional and unmodified systems, either drug carriers and common scaffolds for tissue engineering or advanced hydrogels for wound healing purposes. In this regard, metal oxide nanoparticles show great potential as versatile tools in biomedical science. In particular, iron oxide nanoparticles with different shape and sizes hold outstanding physiochemical characteristics, such as high specific area and porous structure that make them idoneous nanomaterials to be used in diverse aspects of medicine and biological systems. Moreover, due to the high thermal stability and mechanical strength of Fe₂O₃, they have been combined with several polymers and employed for various nano-treatments for specific human diseases. This review is focused on summarizing the applications of Fe₂O₃-based nanocomposites in the biomedical field, including nanocarriers for drug delivery, tissue engineering, and wound healing. Additionally, their structure, magnetic properties, biocompatibility, and toxicity will be discussed.

pH-Responsive PVA-Based Nanofibers Containing GO Modified with Ag Nanoparticles: Physico-Chemical Characterization, Wound Dressing, and Drug Delivery

Site-specific drug delivery and carrying repairing agents for wound healing purposes can be achieved using the intertwined three-dimensional structure of nanofibers. This study aimed to optimize and fabricate poly (vinyl alcohol) (PVA)-graphene oxide (GO)-silver (Ag) nanofibers containing curcumin (CUR) using the electrospinning method for potential wound healing applications. Fourier Transform Infrared (FTIR) spectrophotometry, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Dynamic Light Scattering (DLS), and zeta potential were used to characterize the nanostructures. The mechanical properties of the nanostructures were subsequently examined by tensile strength and elongation test. As shown by MIC analysis of E. coli and S. aureus bacteria, the fabricated nanofibers had superior inhibitory effects on the bacteria growth. Ag nanoparticles incorporation into the nanofibers resulted in increased loading and encapsulation efficiencies from 21% to 56% and from 61% to 86%, respectively. CUR release from PVA/GO-Ag-CUR nanofiber at pH 7.4 was prevented, while the acidic microenvironment (pH 5.4) increased the release of CUR from PVA/GO-Ag-CUR nanofiber, corroborating the pH-sensitivity of the nanofibers. Using the in vitro wound healing test on NIH 3T3 fibroblast cells, we observed accelerated growth and proliferation of cells cultured on PVA/GO-Ag-CUR nanofibers.

Two-Dimensional Graphitic Carbon Nitride (g-C3N4) Nanosheets and Their Derivatives for Diagnosis and Detection Applications

The early diagnosis of certain fatal diseases is vital for preventing severe consequences and contributes to a more effective treatment. Despite numerous conventional methods to realize this goal, employing nanobiosensors is a novel approach that provides a fast and precise detection. Recently, nanomaterials have been widely applied as biosensors with distinctive features. Graphite phase carbon nitride (g-C₃N₄) is a two-dimensional (2D) carbon-based nanostructure that has received attention in biosensing. Biocompatibility, biodegradability, semiconductivity, high photoluminescence yield, low-cost synthesis, easy production process, antimicrobial activity, and high stability are prominent properties that have rendered g-C₃N₄ a promising candidate to be used in electrochemical, optical, and other kinds of biosensors. This review presents the g-C₃N₄ unique features, synthesis methods, and g-C₃N₄-based nanomaterials. In addition, recent relevant studies on using g-C₃N₄ in biosensors in regard to improving treatment pathways are reviewed.