Mn3O4@ZnO Hybrid Material: An Excellent Photocatalyst for the Degradation of Synthetic Dyes including Methylene Blue, Methyl Orange and Malachite Green

Plant-mediated synthesis of Mn3O4nanoparticles: challenges and applications

This review focuses on the green synthesis methods, challenges, and applications of manganese oxide (Mn3O4) nanoparticles investigated in the past five years. Mn3O4nanoparticles offer some unique properties that are attributed in part to the presence of mixed oxidation states of manganese (i.e. +2 and +3) in the particle, which can be utilized in a wide range of redox-sensitive applications, such as in developing supercapacitive energy storage materials. In addition, the green synthesis of Mn3O4nanoparticles through plant extracts has potential uses in sustainable nanotechnology. Various plant extract-mediated synthesis techniques for Mn3O4nanoparticles have been investigated and presented. By comparing the size and structure of the synthesized Mn3O4nanoparticles, we have observed a consistent pattern of obtaining spherical particles with a size ranging from 16 to 50 nm. The morphology of the generated Mn3O4nanoparticles can be influenced by the annealing temperature and the composition of the plant extract used during the nanoparticle synthesis. Additionally, numerous applications for the greenly produced Mn3O4nanoparticles have been demonstrated. Mn3O4nanoparticles derived from plant extracts have been found to possess antimicrobial properties, supercapacitive and electrochemical capabilities, and excellent pollutant degradation efficiency. However, the magnetic properties of these nanoparticles synthesized by plant extracts are yet to be explored for potential biomedical applications. Finally, challenges to existing synthetic methods and future perspectives on the potential applications of these green synthesized Mn3O4nanoparticles are highlighted.

Phase tunable nickel doped Mn3O4 nanoparticle synthesis by chemical precipitation: kinetic study on dye degradation

Nickel (Ni) doped Mn3O4 nanoparticles (NPs) were synthesized by a quick and facile chemical precipitation technique to investigate their performance in the degradation of methylene blue (MB) in the absence of light. XRD, FESEM, TEM, AAS, XPS, and FT-IR were used for the investigation of the structural, surface morphological, and elemental composition of Ni doped Mn3O4 NPs. XRD confirms the formation of a tetragonal phase structure of pure Mn3O4 and 1% and 3% Ni doped Mn3O4 NPs. However, mixed phases were found in the case of 5 to 10% Ni doped Mn3O4 NPs. Well-defined spherical-shaped morphology was presented through FESEM. Particle sizes decreased linearly (58.50 to 23.68 nm) upon increasing the doping concentration from 0% (pure Mn3O4) to 7% respectively, and then increased (48.62 nm) in the case of 10% doping concentration. TEM further confirmed spherical shaped 32 nm nanoparticles for 7% Ni doped Mn3O4. The elemental composition and oxidation state of the prepared NPs were confirmed by using XPS spectra. Mixed valence Mn2+ and Mn4+ states were found in pure Mn3O4 and 1% and 3% Ni doped Mn3O4 NPs in the ratio of 2MnO-MnO2. In addition, three different oxidation states Mn2+, Mn3+, and Mn4+ were found in 5 to 10% Ni doped Mn3O4 NPs. Moreover, as a dopant Ni exists as Ni2+ and Ni3+ states in all Ni doped Mn3O4 NPs. The synthesized NPs were then applied as potent oxidants for the degradation of MB at pH 3. With the increase of doping concentration to 7%, the degree of degradation was increased to 79% in the first 10 min and finally, it became about 98%. The degradation of MB follows the pseudo-first-order linear kinetics with a degradation rate of 0.0342 min-1.

Real-time detection of plasma ferritin by electrochemical biosensor developed for biomedical analysis

Rapid quantification of plasma ferritin levels holds utmost importance for the effective management of different chronic illnesses. We report the development of a novel biosensor for quantitative and selective detection of ferritin from a drop of blood plasma. Developed electrochemical biosensing platform contains a semiconductor nano-structured decorated screen-printed electrode (SND-SPE). The hydrothermally synthesized ZnO-Mn3O4 nanocomposite which has been coated on the electrode surfaces, imparts the specificity in ferritin diagnostics. Cyclic voltametric (CV) measurements with blood plasma shows a prominent reduction peak of ∼ - 0.76 V for specific ferritin reduction. The amperometric sensor shows a known concentration of 0.3 µg/dl ferritin-containing plasma generates 15 µA of current for single-time use. The efficacy of the device is evaluated by detecting ferritin in human plasma samples. The limit of detection and response time of the developed sensor are 0.04 µg/dl and 0.1 s respectively. The layer of ZnO-Mn3O4 nanocomposite has played as an excellent catalyst during the specific reduction of Fe3+ ion and the merits of the device in terms of high robustness, ultrafast detection, highly stable, low-cost, and a biodegradable sensor, make it attractive for the deployment in point-of-care settings.

Morphology Controlled Deposition of Vanadium Oxide (VOx) Nanoparticles on the Surface of Highly Reduced Graphene Oxide for the Photocatalytic Degradation of Hazardous Organic Dyes

Semiconducting nanomaterials based heterogeneous photocatalysis represent a low-cost, versatile technique for environmental remediation, including pollution mitigation, energy management and other environmental aspects. Herein, we demonstrate the syntheses of various heterogeneous photocatalysts based on highly reduced graphene oxide (HRG) and vanadium oxide (VOx)-based nanocomposites (HRG-VOx). Different shapes (rod, sheet and urchin forms) of VOx nanoparticles were successfully fabricated on the surface of HRG under solvo-/hydrothermal conditions by varying the amount of water and ethanol. The high concentration of water in the mixture resulted in the formation of rod-shaped VOx nanoparticles, whereas increasing the amount of ethanol led to the production of VOx sheets. The solvothermal condition using pure ethanol as solvent produced VOx nano-urchins on the surface of HRG. The as-prepared hybrid materials were characterized using various spectroscopic and microscopic techniques, including X-ray diffraction, UV-vis, FTIR, SEM and TEM analyses. The photocatalytic activities of different HRG-VOx nanocomposites were investigated for the photodegradation of methylene blue (MB) and methyl orange (MO). The experimental data revealed that all HRG-VOx composite-based photocatalysts demonstrated excellent performance toward the photocatalytic degradation of the organic dyes. Among all photocatalysts studied, the HRG-VOx nanocomposite consisting of urchin-shaped VOx nanoparticles (HRG-VOx-U) demonstrated superior photocatalytic properties towards the degradation of dyes.

Effective Removal of Methylene Blue by Mn3O4/NiO Nanocomposite under Visible Light

Wastewater treatment is indispensable as wastewater can lead to adverse health effects and deteriorate the quality of life on earth. Photocatalysis is a facile methodology to address this issue. In this study, nanocomposites (NCs) of manganese oxide (Mn3O4) and nickel oxide (NiO) were synthesized in different weight ratios via the solid-state reaction route. Structural properties, optical properties, surface morphology, and functional group analysis of the synthesized nanomaterials were conducted using X-ray diffraction (XRD), UV– Vis spectroscopy, scanning electron microscopy (SEM) along with energy-dispersive X-ray (EDX) analysis, and Fourier-transform infrared (FTIR) spectroscopy, respectively. The bandgap of the nanocomposite decreases significantly from 2.35 eV for the Mn3O4 NPs to 1.65 eV for the Mn3O4/NiO nanocomposite (NC). Moreover, adsorption studies followed by the photocatalytic performance of the Mn3O4/NiO NCs were evaluated to determine the removal of methylene blue (MB) dye from wastewater. The photocatalytic performance of the nanocomposite enhances as the ratio of Mn3O4 in the composite increases from one weight percentage to three weight percentage. The photocatalytic degradation efficiency was calculated to be 95%. The results show that the synthesized NCs could play an important role in photocatalytic wastewater purification and environmental remediation.