Two-Dimensional Bimetallic Phthalocyanine Covalent-Organic-Framework-Based Chemiresistive Gas Sensor for ppb-Level NO2 Detection

Conductive Framework Materials for Chemiresistive Detection and Differentiation of Toxic Gases

ConspectusSensing complex gaseous mixtures and identifying their composition and concentration have the potential to achieve unprecedented improvements in environmental monitoring, medical diagnostics, industrial safety, and the food/agriculture industry. Electronically transduced chemical sensors capable of recognizing and differentiating specific target gases and transducing these chemical stimuli in a portable electronic device offer an opportunity for impact by bridging the utility of chemical information with global wireless connectivity. Among electronically transduced chemical sensors, chemiresistors stand out as particularly promising due to combined features of low-power requirements, room temperature operation, non-line-of-sight detection, high portability, and exceptional modularity. Relying on changes in resistance of a functional material triggered by variations in the surrounding chemical environment, these devices have achieved part-per-billion sensitivities of analytes by employing conductive polymers, graphene, carbon nanotubes (CNTs), metal oxides, metal nanoparticles, metal dichalcogenides, or MXenes as sensing materials. Despite these tremendous developments, the need for stable, selective, and sensitive chemiresistors demands continued innovation in material design in order to operate in complex mixtures with interferents as well as variations in humidity and temperature.To fill existing gaps in sensing capabilities, conductive metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) have recently emerged as a promising class of materials for chemiresistive sensing. In contrast to previously reported chemiresistors, these materials offer at least three unique features for gas sensing applications: (i) bottom-up synthesis from molecularly precise precursors that allows for strategic control of material-analyte interactions, (ii) intrinsic conductivity that simultaneously facilitates charge transport and signal transduction under low power requirements, and (iii) high surface area that enables the accessibility of abundant active sites and decontamination of gas streams by coordinating to and, sometimes, detoxifying harmful analytes. Through an emphasis on molecular engineering of structure-property relationships in conductive MOFs and COFs, combined with strategic innovations in device integration strategies and device form factor (i.e., the physical dimensions and design of device components), our group has paved the way to demonstrating the multifunctional utility of these materials in the chemiresistive detection of gases and vapors. Backed by spectroscopic assessment of material-analyte interactions, we illustrated how molecular-level features lead to device performance in detection, filtration, and detoxification of gaseous analytes. By merging the bottom-up synthesis of these materials with device integration, we show the versatility and scalability of using these materials in low-power electronic sensing devices. Taken together, our achievements, combined with the progress spearheaded on this class of materials by other researchers, establish conductive MOFs and COFs as promising multifunctional materials for applications in electronically transduced, portable, low-power sensing devices.

In Situ Growth of COF/PVA-Carrageenan Hydrogel Using the Impregnation Method for the Purpose of Highly Sensitive Ammonia Detection

Flexible ammonia (NH3) gas sensors have gained increasing attention for their potential in medical diagnostics and health monitoring, as they serve as a biomarker for kidney disease. Utilizing the pre-designable and porous properties of covalent organic frameworks (COFs) is an innovative way to address the demand for high-performance NH3 sensing. However, COF particles frequently encounter aggregation, low conductivity, and mechanical rigidity, reducing the effectiveness of portable NH3 detection. To overcome these challenges, we propose a practical approach using polyvinyl alcohol-carrageenan (κPVA) as a template for in the situ growth of two-dimensional COF film and particles to produce a flexible hydrogel gas sensor (COF/κPVA). The synergistic effect of COF and κPVA enhances the gas sensing, water retention, and mechanical properties. The COF/κPVA hydrogel shows a 54.4% response to 1 ppm NH3 with a root mean square error of less than 5% and full recovery compared to the low response and no recovery of bare κPVA. Owing to the dual effects of the COF film and the particles anchoring the water molecules, the COF/κPVA hydrogel remained stable after 70 h in atmospheric conditions, in contrast, the bare κPVA hydrogel was completely dehydrated. Our work might pave the way for highly sensitive hydrogel gas sensors, which have intriguing applications in flexible electronic devices for gas sensing.

Designing State-of-the-Art Gas Sensors: From Fundamentals to Applications

Gas sensors are crucial in environmental monitoring, industrial safety, and medical diagnostics. Due to the rising demand for precise and reliable gas detection, there is a rising demand for cutting-edge gas sensors that possess exceptional sensitivity, selectivity, and stability. Due to their tunable electrical properties, high-density surface-active sites, and significant surface-to-volume ratio, nanomaterials have been extensively investigated in this regard. The traditional gas sensors utilize homogeneous material for sensing where the adsorbed surface oxygen species play a vital role in their sensing activity. However, their performance for selective gas sensing is still unsatisfactory because the employed high temperature leads to the poor stability. The heterostructures nanomaterials can easily tune sensing performance and their different energy band structures, work functions, charge carrier concentration and polarity, and interfacial band alignments can be precisely designed for high-performance selective gas sensing at low temperature. In this review article, we discuss in detail the fundamentals of semiconductor gas sensing along with their mechanisms. Further, we highlight the existed challenges in semiconductor gas sensing. In addition, we review the recent advancements in semiconductor gas sensor design for applications from different perspective. Finally, the conclusion and future perspectives for improvement of the gas sensing performance are discussed.

Donor-Acceptor Interactions Enhanced Colorimetric Sensors for Both Acid and Base Vapor Based on Two-Dimensional Covalent Organic Frameworks

Due to the high surface area and uniform porosity of covalent organic frameworks (COFs), they exhibit superior properties in capturing and detecting even trace amounts of gases in the air. However, the COFs materials that possess dual detected functionality are still less reported. Here, an imine-based COF containing thiophene as a donor and triazine as an acceptor to form spatial-distribution-defined D-A structures was prepared. D-A system between thiophene and triazine facilitates the charge transfer process during the protonation process of the imine and the triazine units. The obtained COF exhibits simultaneous sensing ability toward both acidic and alkaline vapors with obvious colorimetric sensing functionality.

Advanced tetra amino (ATA-100) cobalt(II) phthalocyanine-based metallo-covalent organic polymer for sensitively detecting volatile organic compounds

The synthesis and characterization of a novel covalent organic polymer cobalt (II) phthalocyanine (ATA-100) including tetra amino group is described for the first time. This covalent organic polymer (COP) is characterized by FTIR, TGA, RAMAN, PXRD, and SEM-EDS. The developed sensor is tested for acetone, ethyl butyrate, n-hexane, chloroform, and n-butyraldehyde in a range of 80-10,900 ppm. ATA-100 showed the highest sensitivity for ethyl butyrate. The results have confirmed the possibility of utilizing ATA-100 COP-based surface acoustic wave (SAW) sensors for a wide variety of applications, including indoor air quality and environmental monitoring of volatile organic compounds (VOCs).