Self-Sacrificial Salt Templating: Simple Auxiliary Control over the Nanoporous Structure of Porous Carbon Monoliths Prepared through the Solvothermal Route

Highly Stretchable and Sensitive Flexible Strain Sensor Based on Fe NWs/Graphene/PEDOT:PSS with a Porous Structure

With the rapid development of wearable smart electronic products, high-performance wearable flexible strain sensors are urgently needed. In this paper, a flexible strain sensor device with Fe NWs/Graphene/PEDOT:PSS material added under a porous structure was designed and prepared. The effects of adding different sensing materials and a different number of dips with PEDOT:PSS on the device performance were investigated. The experiments show that the flexible strain sensor obtained by using Fe NWs, graphene, and PEDOT:PSS composite is dipped in polyurethane foam once and vacuum dried in turn with a local linearity of 98.8%, and the device was stable up to 3500 times at 80% strain. The high linearity and good stability are based on the three-dimensional network structure of polyurethane foam, combined with the excellent electrical conductivity of Fe NWs, the bridging and passivation effects of graphene, and the stabilization effect of PEDOT:PSS, which force the graphene-coated Fe NWs to adhere to the porous skeleton under the action of PEDOT:PSS to form a stable three-dimensional conductive network. Flexible strain sensor devices can be applied to smart robots and other fields and show broad application prospects in intelligent wearable devices.

Preparation and application of porous materials from coal gasification slag for wastewater treatment: A review

In recent years, coal gasification has been gradually promoted as clean technology, and coal gasification slag (CGS) emissions have increased accordingly. CGS, including coarse slag and fine slag, is rich in SiO₂ and Al₂O₃ and has pozzolanic activity, and thus CGS can be regarded as a cheap source of aluminosilicate. Also, CGS, especially the fine slag, usually contains higher contents of residual carbon which has a large specific surface area and low volatility and hence can be considered as a favorable precursor of activated carbon. Benefiting from these characteristics, CGS can be used to prepare high value-added porous materials, such as zeolite, mesoporous silica, carbon-silicon composite, and porous ceramics, and the obtained structures accommodate both sufficient adsorption capacity and low cost. Here, we review the research advances in characteristics of CGS and preparation methods of CGS-based porous materials, as well as their adsorption performance of heavy metal ions, organic dyes, ammonia nitrogen, and other water pollutants. The current studies indicate that CGS-derived adsorbents are effective and economical alternatives for removing aqueous pollutants. In addition, further research prospects on CGS-based porous materials are proposed.