The Recognition of Sweat Latent Fingerprints with Green-Emitting Carbon Dots

Dye-doped cellulose nanocrystals as novel dusting powders for visualizing latent fingerprints

Powder-dusting method based on the visual contrast between the background surface and powder-covered ridges of a fingerprint is widely used to develop the invisible latent fingerprints (LFPs) left at crime scenes. Recently, the development of nano-sized powders with excellent optical performances has been extensively explored. In this work, we employed environmentally friendly and low-toxicity cellulose nanocrystals as the novel support. Using dye-doped cellulose nanocrystals as novel dusting powders, two dyes (phenylfluorone and curcumin) were adsorbed on the cellulose nanocrystals by a simple batch adsorption method. The dye-doped cellulose nanocrystals (namely, phenylfluorone-doped cellulose nanocrystals (PDCN) and curcumin-doped cellulose nanocrystals (CDCN)) containing 2% of the loaded mass of both the dyes with bright green fluorescence were developed to visualize LFPs on the surfaces of various substrates (such as glass slide, printing paper, orange plastic card, tile, stainless steel, compact disc, red plastic packing, copper foil and aluminum foil). Images of the LFPs can been obtained by both the dye-doped cellulose nanocrystals with sufficient affinity to the ridges of LFPs. High-quality ridge details with features at the second and third level can be detected by CDCN, whereas PDCN only display the secondary-level features of ridge details. Compared with PDCN, CDCN illustrate higher sensitivity, higher selectivity, and better contrast, especially for detecting fresh and non-fresh LFPs on porous and non-porous substrates, and has the potential for practical use in forensic science.

In situ coupling of carbon dots with zeolitic imidazolate frameworks enabling highly red emission in solid state

In this work, an extraordinary solid red emissive phosphor was prepared based on red-emitting carbon dots (R-CDs). The synthesis was conducted under an in-situ strategy, with assistance of zeolitic imidazolate frameworks. The obtained phosphor possesses a stronger red emission located at 630 nm in solid state, with CIE coordinate of (0.63, 0.35) and quantum yield of ∼ 45 %. As a consequence, not only aggregation-induced fluorescence quenching of R-CDs is avoided in solid state, but also an enhanced emission with high quantum yield is presented. Fluorescence properties were further explored in detail. The emission is found to be responsive to temperature and applied pressure. Based on the excellent emissive performance, the material has great potentials in anti-counterfeiting, latent fingerprint imaging, and temperature/pressure-sensing. This work provides a facile and promising way of preparing solid carbon-based phosphors for special applications.

Red Emitting Solid-State CDs/PVP with Hydrophobicity for Latent Fingerprint Detection

Fluorescent carbon dots (CDs) are a new type of photoluminescent nanomaterial. Solid-state CDs usually undergo fluorescence quenching due to direct π-π* interactions and superabundant energy resonance transfer. Therefore, the preparation of solid-state fluorescent CDs is a challenge, especially the preparation of long wavelength solid-state CDs. In this research, long wavelength emission CDs were successfully synthesized by solvothermal methods, and the prepared CDs showed good hydrophobicity. The composite solid-state CDs/PVP (Polyvinyl pyrrolidone) can emit strong red fluorescence, and the quantum yield (QY) of the CDs/PVP powder reaches 18.9%. The prepared CDs/PVP solid-state powder was successfully applied to latent fingerprint detection. The results indicate that the latent fingerprints developed by CDs/PVP powder have a fine definition and high contrast visualization effect, which proves that the prepared CDs/PVP has great application potential in latent fingerprint detection. This study may provide inspiration and ideas for the design of new hydrophobic CDs.

Innovative Solutions for Worn Fingerprints: A Comparative Analysis of Traditional Fingerprint Impression and 3D Printing

Fingerprint recognition systems have achieved widespread integration into various technological devices, including cell phones, computers, door locks, and time attendance machines. Nevertheless, individuals with worn fingerprints encounter challenges when attempting to unlock original fingerprint systems, which results in disruptions to their daily activities. This study explores two distinct methods for fingerprint backup: traditional fingerprint impression and 3D printing technologies. Unlocking tests were conducted on commonly available optical fingerprint lock-equipped cell phones to assess the efficacy of these methods, particularly in unlocking with worn fingerprints. The research findings indicated that the traditional fingerprint impression method exhibited high fidelity in reproducing fingerprint patterns, achieving an impressive unlocking success rate of 97.8% for imprinting unworn fingerprints. However, when dealing with worn fingerprints, the traditional fingerprint impression technique showed a reduced unlocking success rate, progressively decreasing with increasing degrees of finger wear. In contrast, 3D-printed backup fingerprints, with image processing and optimization of ridge height, mitigated the impact of fingerprint wear on the unlocking capability, resulting in an unlocking success rate of 84.4% or higher. Thus, the utilization of 3D printing technology proves advantageous for individuals with severely worn or incomplete fingerprints, providing a viable solution for unforeseen circumstances.

Nanocomposites of nitrogen-doped carbon dots/hydrotalcite with enhanced solid-state fluorescence for the recognition of latent fingerprints

In this work, a green emissive nanocomposite was synthesized by embedding nitrogen-doped carbon dots into hydrotalcite (N-CD/hydrotalcite) via a hydrothermal process for the recognition of latent fingerprints (LFPs). Good dispersion of the nano-sized N-CD on the surface of hydrotalcite overcomes the fluorescence quenching of N-CD in the solid state and can enhance solid-state fluorescence. N-CD/hydrotalcite emits stable strong green fluorescence even at different excitation wavelengths and exhibits good selectivity and sensitivity for the visualization of LFPs on various substrates such as glass slides, tiles, leather, aluminum foil, printing paper, colored surfaces of plastic packing, copper foil, planks, leaves, currencies, and bar codes. The high-level details of the ridge patterns of both fresh and aged LFPs can be clearly identified with good clarity and high contrast without background interferences under the excitation of a 450 nm light source. There is no significant difference in the LFP image visualized by N-CD/hydrotalcite and commercial fluorescent powders, indicating that the effectiveness of N-CD/hydrotalcite for the visualization of LFPs is equivalent to that of commercial fluorescent powders. These observations illustrate that N-CD/hydrotalcite has great potential in the recognition of LFPs.

Novel Organic-Inorganic Hybrid Polystyrene Nanoparticles with Trichromatic Luminescence for the Detection of Latent Fingerprints

This article explored the application of novel organic-inorganic hybrid polystyrene nanoparticles (PSNPs) with trichromatic luminescence for the detection of latent fingerprints. The PSNPs were synthesized by encapsulated Eu(DBM)3phen, coumarin 6, and FDBT into the polystyrene nanoparticles through the swelling method and applied them to visualize latent fingerprints. The PSNPs had a spherical morphology with an average diameter of 310.7 nm, and they emitted trichromatic fluorescence (525 nm/570 nm/610 nm) under 365 nm excitation wavelength with green/yellow/red color under filters. They were less likely to aggregate, float or stain the background when treating fingerprints. The developed fingerprints with excellent clarity of ridges and contrast could be viewed, and the digital magnification of fluorescence-developed fingerprints provided more minutiae details about some regional patterns. The colorimetric and fluorescent trichromatic light could provide complementary signals without the background interference from fluorescent substrates and/or complex multicolor surfaces, which improved the applicability of fluorescent nanoparticles for fingerprints development. PSNPs are promising for the detection of latent fingerprints and practical criminal investigations with their ease of operation, eco-friendly properties, and excellent trichromatic optical performance.

Pristine Graphic Carbon Nitride Quantum Dots for the Visualized Detection of Latent Fingerprints

User-friendly fingerprint powders, namely efficient, low-cost and nontoxic ones, are always desirable for the development of latent fingerprints (LFPs). Here, we described the use of pristine graphic carbon nitride quantum dots (g-C₃N₄ QDs) as a new kind of user-friendly fingerprint powder. The g-C₃N₄ QDs can be easily prepared from urea and sodium citrate precursors through low temperature solid-phase reaction. Due to their good optical properties and selective interactions with secretion residuals, the g-C₃N₄ QDs powders were exploited to develop LFPs on different substrates by the powder dusting technique. The LFP images on a plastic bag exhibited a high ridge and furrow contrast ratio, allowing for easy identification of level 1 - 3 details of LFPs. This work indicates that the g-C₃N₄ QD powders provide good performance for LFP visualization and is likely to be adopted for some applications in forensic investigations.

Carbohydrate biopolymers, lignin based adsorbents for removal of heavy metals (Cd2+, Pb2+, Zn2+) from wastewater, regeneration and reuse for spent adsorbents including latent fingerprint detection: A review

Living organisms are created by carbohydrate biopolymers such as chitosan, carboxymethyl cellulose, alginate and lignin. These carbohydrate biopolymers have been extensively used for environmental applications because they are bio-degradable, bio-compatible, non-toxic and inexpensive. Recently, carbohydrate biopolymers have been used to prepare different nanocomposite adsorbents for treatment of wastewater. These adsorbents explored the removal effectiveness of inorganic pollutants from aqueous solution. This review article discusses the synthesis and application of chitosan, carboxymethyl cellulose, alginate and lignin nanocomposites as adsorbents for heavy metals. Toxic metals can be efficiently absorbed by cross-linkers, distributed in aqueous solutions of divalent heavy metal ions to examine their polymer absorption capacity. These nanocomposites were used for the adsorption of highly toxic metals such as Cd2+, Pb2+ and Zn2+ in water. To make heavy metal ion uptake more effective, more functionalization has been implemented such as blending, grafting, or mixing with different nanomaterials with an extra functional group. The integration of the second part into the main polymer chain not only adds functionality but also increases mechanical efficiency, one of the core criteria for adsorbent recyclability. The remediation method of metal ions from wastewater is cheaper as long as the adsorbent is reused. Furthermore, they exhibited good performance for the reuse of spent adsorbents after adsorption-desorption processes including latent fingerprint detection with nanomaterials by using the powder dusting method. Chitosan, carboxymethyl cellulose, alginate and lignin based nanocomposites have demonstrated better adsorption activities due to great physical and chemical properties for the chelation of heavy metals such as Cd2+, Pb2+ and Zn2+ from water and also higher regeneration with various eluents after several desorption-adsorption cycles. In addition, reuse of the spent adsorbents in latent fingerprint detection with different nanomaterials is discussed. Finally, this review article makes recommendations for future studies in light of environmentally favourable and economical applications.

Applications of Carbon Dots (CDs) in Latent Fingerprints Imaging

Carbon dots (CDs), a new member of the carbon-based material family, possess unique properties, such as high fluorescence, non-toxicity, eco-friendliness, stability and cost-effectiveness. These properties helped CDs to receive tremendous attention in various fields, namely, biological, opto-electronic, bio-imaging and energy-related applications. Although CDs are widely explored in bio-imaging and bio-sensing applications, their effectiveness in forensic science and technology is comparatively new. In this review, applications of CDs pertaining to latent FPs recovery since 2015 to 2020 is summarized comprehensively.

One-step synthesis of blue-green luminescent carbon dots by a low-temperature rapid method and their high-performance antibacterial effect and bacterial imaging

Due to the global infection problem caused by the abuse of antibiotics, the preparation of novel antibacterial nanomaterials is a key and basic requirement for applications in antibacterial and bacterial imaging fields. This paper reports the one-step preparation of blue-green-emitting carbon dots (CDs) under low temperature (80 °C) with glucose as the carbon source, citric acid as the dehydrating agent, and polyethyleneimine as the nitrogen source. Through inhibition zone tests and minimum inhibitory concentration (MIC) experiments, the inhibitory abilities of prepared CDs against various microorganisms, including gram-positive bacteria, gram-negative bacteria and fungi, were compared. It is worth mentioning that the MIC of CDs against Staphylococcus aureus reaches 4.7 μg ml^-1, and the CDs exhibit excellent biocompatibility. Moreover, studies on visual-treatment therapy, in which infection treatment can be performed at the same time as bacterial imaging, with the prepared functional antibacterial CDs based on fluorescence confocal imaging would be beneficial to their promising future in medical and biological fields.

Fluorescence spotting of latent sweat fingerprints with zinc oxide carbon dots embedded in a silica gel nanopowder: a green approach

In this research article, the green synthesized CZnO-dots/Si nanopowder is expended as the LFs fluorescent tagging agent by the dust blowing method.

Red Fluorescent Carbon Dot Powder for Accurate Latent Fingerprint Identification using an Artificial Intelligence Program

Development and comparison of the latent fingerprints (LFPs) are two major studies in detection and identification of LFPs, respectively. However, integrated research studies on both fluorescent materials for LFP development and digital-processing programs for LFP comparison are scarcely seen in the literature. In this work, highly efficient red-emissive carbon dots (R-CDs) are synthesized in one pot and mixed with starch to form R-CDs/starch phosphors. Such phosphors are comparable with various substrates and suitable for the typical powder dusting method to develop LFPs. The fluorescence images of the developed LFPs are handled with an artificial intelligence program. For the optimal sample, this program presents an excellent matching score of 93%, indicating that the developed sample has very high similarity with the standard control. Our results are significantly better than the benchmark obtained by the traditional method, and thus, both the R-CDs/starch phosphors and the digital processing program fit well for the practical applications.

A simple and ubiquitous device for picric acid detection in latent fingerprints using carbon dots

This work addresses the synthetic optimization of carbon dots (CDs) and their application in sensing picric acid from latent fingerprints by exploiting a smartphone-based RGB tool. The optimization of the synthesis of CDs is investigated towards achieving shorter reaction time, better product yield and fluorescence quantum efficiency. Precursors such as citric acid and thiourea were chosen for the synthesis of CDs. Among the various synthetic methodologies, it is found that the pyrolysis method offers ∼50% product yield within 15 min. The morphology and optical properties of the prepared CDs are characterized using the typical microscopic and spectroscopic techniques, respectively. The synthesized CDs exhibit quasi-spherical shape with an average particle size of 1.7 nm. The excitation dependent emissive properties of CDs are investigated by time resolved fluorescence spectroscopy. Furthermore, the excellent fluorescence properties (φ = 11%) of CDs are explored as a fluorescent fingerprint powder for the identification of latent fingerprints on various substrates. In addition, the presence of picric acid in latent fingerprints was detected. Furthermore, this study is extended to perform real time detection of fingerprints and harmful contaminants in fingerprints by utilizing a smartphone-based RGB color analysis tool. Based on these investigations, the prepared CDs could be a prospective fluorescent material in the field of forensics.

Interpol review of fingermarks and other body impressions 2016-2019

This review paper covers the forensic-relevant literature in fingerprint and bodily impression sciences from 2016 to 2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/content/download/14458/file/Interpol%20 Review%20 Papers%202019. pdf.