Antioxidant Nanomaterial Based on Core⁻Shell Silica Nanospheres with Surface-Bound Caffeic Acid: A Promising Vehicle for Oxidation-Sensitive Drugs

Nanoantioxidant Materials: Nanoengineering Inspired by Nature

Oxidants are very active compounds that can cause damage to biological systems under specific environmental conditions. One effective way to counterbalance these adverse effects is the use of anti-oxidants. At low concentrations, an antioxidant is defined as a compound that can delay, control, or prevent an oxidative process. Antioxidants exist in plants, soil, and minerals; therefore, nature is a rich source of natural antioxidants, such as tocopherols and polyphenols. In nature, antioxidants perform in tandem with their bio-environment, which may tune their activity and protect them from degradation. In vitro use of antioxidants, i.e., out of their biomatrix, may encounter several drawbacks, such as auto-oxidation and polymerization. Artificial nanoantioxidants can be developed via surface modification of a nanoparticle with an antioxidant that can be either natural or synthetic, directly mimicking a natural antioxidant system. In this direction, state-of-the-art nanotechnology has been extensively incorporated to overcome inherent drawbacks encountered in vitro use of antioxidants, i.e., out of their biomatrix, and facilitate the production and use of antioxidants on a larger scale. Biomimetic nanoengineering has been adopted to optimize bio-medical antioxidant systems to improve stability, control release, enhance targeted administration, and overcome toxicity and biocompatibility issues. Focusing on biotechnological sciences, this review highlights the importance of nanoengineering in developing effective antioxidant structures and comparing the effectiveness of different nanoengineering methods. Additionally, this study gathers and clarifies the different antioxidant mechanisms reported in the literature and provides a clear picture of the existing evaluation methods, which can provide vital insights into bio-medical applications.

Preparation, Characterization, and Environmental Safety Assessment of Dithiocarbazate Loaded Mesoporous Silica Nanoparticles

Dithiocarbazates comprise an important class of Schiff bases with remarkable biological applications due to the imine group present in their structure. However, full exploitation of the biological activity of 3-methyl-5-phenyl-pyrazoline-1-(S-benzyldithiocarbazate) (DTC) is limited due to its easy degradation and poor solubility in aqueous solutions. The loading of DTC into mesoporous silica nanoparticles (MSiNPs) can be an excellent strategy to improve the solubility of DTC in the aqueous medium. Therefore, the main goal of the present work was to design MSiNP-DTC and to evaluate the success of the loading process by measuring its physicochemical properties and evaluating the environmental safety of the new DTC formulation using different aquatic organisms, such as the microalgae Raphidocelis subcapitata, the macrophyte Lemna minor, and the marine bacterium Aliivibrio fischeri. DTC, MSiNP, and MSiNP-DTC concentrations ranging from 8.8 to 150 mg L^-1 were tested for all the species, showing low toxicity against aquatic organisms. Loading DTC into MSiNPs caused a slight increase in the toxicity at the concentrations tested, only allowing for the estimation of the effect concentration causing a 20% reduction in bioluminescence or growth rate (EC₂₀). Therefore, despite the potential of MSiNPs as a drug delivery system (DDS), it is of utmost importance to assess its impact on the safety of the new formulations.

Transfersomes as alternative topical nanodosage forms for the treatment of skin disorders

Topical drug delivery is a promising approach to treat different skin disorders. However, it remains a challenge mainly due to the nature and rigidity of the nanosystems, which limit deep skin penetration, and the unsuccessful demonstration of clinical benefits; greater penetration by itself, does not ensure pharmacological success. In this context, transfersomes have appeared as promising nanosystems; deformability, their unique characteristic, allows them to pass through the epidermal microenvironment, improving the skin drug delivery. This review focuses on the comparison of transfersomes with other nanosystems (e.g., liposomes), discusses recent therapeutic applications for the topical treatment of different skin disorders and highlights the need for further studies to demonstrate significant clinical benefits of transfersomes compared with conventional therapies.

Methods to Determine Chain-Breaking Antioxidant Activity of Nanomaterials beyond DPPH•. A Review

This review highlights the progress made in recent years in understanding the mechanism of action of nanomaterials with antioxidant activity and in the chemical methods used to evaluate their activity. Nanomaterials represent one of the most recent frontiers in the research for improved antioxidants, but further development is hampered by a poor characterization of the ''antioxidant activity'' property and by using oversimplified chemical methods. Inhibited autoxidation experiments provide valuable information about the interaction with the most important radicals involved in the lipid oxidation, namely alkylperoxyl and hydroperoxyl radicals, and demonstrate unambiguously the ability to stop the oxidation of organic materials. It is proposed that autoxidation methods should always complement (and possibly replace) the use of assays based on the quenching of stable radicals (such as DPPH• and ABTS•+). The mechanisms leading to the inhibition of the autoxidation (sacrificial and catalytic radical trapping antioxidant activity) are described in the context of nanoantioxidants. Guidelines for the selection of the appropriate testing conditions and of meaningful kinetic analysis are also given.

Multiparticulate Systems of Ezetimibe Micellar System and Atorvastatin Solid Dispersion Efficacy of Low-Dose Ezetimibe/Atorvastatin on High-Fat Diet-Induced Hyperlipidemia and Hepatic Steatosis in Diabetic Rats

The aim of this study was to develop multiparticulate systems with a combination of ezetimibe micellar systems and atorvastatin solid dispersions using croscarmellose as a hydrophilic vehicle and Kolliphor RH40 as a surfactant. The presence of a surfactant with low hydrophilic polymer ratios produces the rapid dissolution of ezetimibe through a drug-polymer interaction that reduces its crystallinity. The solid dispersion of atorvastatin with low proportions of croscarmellose showed drug-polymer interactions sufficient to produce the fast dissolution of atorvastatin. Efficacy studies were performed in diabetic Goto-Kakizaki rats with induced hyperlipidemia. The administration of multiparticulate systems of ezetimibe and atorvastatin at low (2 and 6.7 mg/kg) and high (3 and 10 mg/kg) doses showed similar improvements in levels of cholesterol, triglycerides, lipoproteins, alanine transaminase, and aspartate transaminase compared to the high-fat diet group. Multiparticulate systems at low doses (2 and 6.7 mg/kg of ezetimibe and atorvastatin) had a similar improvement in hepatic steatosis compared to the administration of ezetimibe and atorvastatin raw materials at high doses (3 and 10 mg/kg). These results confirm the effectiveness of solid dispersions with low doses of ezetimibe and atorvastatin to reduce high lipid levels and hepatic steatosis in diabetic rats fed a high-fat diet.

N-acetylcysteine delivery with silica nanoparticles into 3T3-L1 adipocytes

Background: The addition of 5 mM N-acetylcysteine (NAC) to 3T3-L1 adipocytes culture inhibits the accumulation of triglycerides (Tg) by 50%, but after 48 h uptake was only 16% of total NAC available. Based on these results, the aim of this study is to increase the NAC cellular uptake by encapsulating it in silica nanoparticles (NPs). Materials & methods: Silica NPs, 20 ± 4.5 nm in size, were developed, with an inner cavity loaded with 5 mM NAC. At 48 h after treatment, there was a dose-dependent cytotoxic effect. We attempted to reduce the cytotoxicity of silica NPs by coating them with bovine serum albumin. Results: While we obtained nontoxic bovine serum albumin coated NPs, their effect on Tg cellular accumulation was also reduced.

Repositioning Natural Antioxidants for Therapeutic Applications in Tissue Engineering

Although a large panel of natural antioxidants demonstrate a protective effect in preventing cellular oxidative stress, their low bioavailability limits therapeutic activity at the targeted injury site. The importance to deliver drug or cells into oxidative microenvironments can be realized with the development of biocompatible redox-modulating materials. The incorporation of antioxidant compounds within implanted biomaterials should be able to retain the antioxidant activity, while also allowing graft survival and tissue recovery. This review summarizes the recent literature reporting the combined role of natural antioxidants with biomaterials. Our review highlights how such functionalization is a promising strategy in tissue engineering to improve the engraftment and promote tissue healing or regeneration.

Preparation and Performance of Silica-di-Block Polymer Hybrids for BSA-Resistance Coatings

A series of tem-responsive and protein-resistance property silica-di-block polymers SiO₂-g-PMMA-b-P(PEGMA) hybrids are synthesized with methyl methacrylate (MMA) and poly (ethylene glycol) methyl ether methacrylate (PEGMA) by the surface-initiated atom transfer radical polymerization (SI-ATRP). The morphology in tetrahydrofuran (THF) solution, lower critical solution temperature (LCST), surface morphology, bovine serum albumin (BSA)-resistance property, and thermal stability of nanoparticles were analyzed. The results of ¹H-NMR, GPC, and TEM prove that the silica-di-block hybrids have been obtained. The silica-di-block hybrids shows the LCST (52–64 °C) in aqueous solution. The hybrid films casted by THF present distributed uniform granular bulges and the film surface is relatively smooth (Ra = 15.4 nm ~ 10.5 nm). The results of QCM-D showed that only a small amount of BSA protein(△f = 18.6 ~ 11.8 Hz) was adsorbed on the surface of the films. The result of XPS also demonstrated that only a small amount of BSA protein was absorbed onto the surface of the film (N% = 1.86). The TGA analyses indicate that the thermal decomposition temperature of hybrids is 288 °C. Thus, it is suggested that the hybrids are served as a suitable coating with BSA resistance property and thermal stability.

Caffeic Acid-coated Nanolayer on Mineral Trioxide Aggregate Potentiates the Host Immune Responses, Angiogenesis, and Odontogenesis

INTRODUCTION

The aim of this study was to investigate whether mineral trioxide aggregate (MTA) can be modified with caffeic acid (CA) to form caffeic acid/mineral trioxide aggregate (CAMTA) cement and to evaluate its physicochemical and biological properties as well as its capability in immune suppression and angiogenesis.

METHODS

MTA was immersed in trishydroxymethyl aminomethane buffer with CA to allow coating onto MTA powders. X-ray diffractometry and tensile stress-strain tests were conducted to assess for physical characteristics of CAMTA and to evaluate for successful modification of MTA. Then, the CAMTA cement was immersed in simulated body fluid to evaluate its hydroxyapatite formation capabilities and Si release profiles. In addition, RAW 264.7 cells and human dental pulp stem cells were used to evaluate CAMTA's immunosuppressive capabilities and cell responses, respectively. hDPSCs were also used to assess CAMTA's angiogenic capabilities.

RESULTS

The X-ray diffractometry results showed that CA can be successfully coated onto MTA without disrupting or losing MTA's original structural properties, thus allowing us to retain the initial advantages of MTA. CAMTA was shown to have higher mechanical properties compared with MTA and had rougher pitted surfaces, which were hypothesized to lead to enhanced adhesion, proliferation, and secretion of angiogenic- and odontogenic-related proteins. In addition, it was found that CAMTA was able to enhance hydroxyapatite formation and immunosuppressive capabilities compared with MTA.

CONCLUSIONS

CAMTA cements were found to have improved physicochemical and biological characteristics compared with their counterpart. In addition, CAMTA cements had enhanced odontogenic, angiogenic, and immunosuppressive properties compared with MTA. All of the results of this study proved that CAMTA cements could be a biomaterial for future clinical applications and tissue engineering use.

Carminic Acid Linked to Silica Nanoparticles as Pigment/Antioxidant Bifunctional Excipient for Pharmaceutical Emulsions

The incorporation of pigments and natural polyphenols into inorganic matrices, resulting in a hybrid material that improves the resistance and chemical stability of the pigments and the antioxidant capacity of the materials, has been of great interest to the pharmaceutical, chemical and food industries. The aim of this work was to prepare and characterize a bifunctional pigment-antioxidant nanomaterial-based carminic acid-decorated solid core-mesoporous shell silica nanoparticles, evaluating its properties as a pigment, its antioxidant capacity and its properties as a chemical stabilizer of emulsions. The chemical stability of oil-in-water (O/W) Pickering emulsions was evaluated determining the stability of vitamin E solubilized in the oil phase. Carminic acid was attached through the action of coupling ethylcarbodiimide hydrochloride (EDC)/N-hydroxysuccinimide (NHS) agents, and the resulting spherical and homogeneous nanoparticles showed a diameter close to 175 nm. A notorious change of emulsion color was observed by the addition of the nanomaterial. Emulsions showed an attractive pink color, and when the pH was adjusted to pH 3 and pH 9, a change in color was observed, analogous to carminic acid in solution. The nanomaterial incorporation also improved chemical stability, decreasing vitamin E consumption to 9.26% of the initial value, demonstrating an important antioxidant effect of the developed nanomaterial.

Nanoantioxidant-Based Silica Particles as Flavonoid Carrier for Drug Delivery Applications

Nanosystems used in pharmaceutical formulations have shown promising results in enhancing the administration of drugs of difficult formulations. In particular, porous silica nanoparticles have demonstrated excellent properties for application in biological systems; however, there are still several challenges related to the development of more effective and biocompatible materials. An interesting approach to enhance these nanomaterials has been the development of nanoantioxidant carriers. In this work, a hybrid nanoantioxidant carrier based on porous silica nanoplatform with rosmarinic acid antioxidant immobilized on its surface were developed and characterized. Techniques such as dynamic light scattering (DLS), zeta potential, transmission electron microscopy (TEM), N2 adsorption-desorption measurements, differential scanning calorimetry (DSC), Fourier transform-infrared spectroscopy (FT-IR), and 2,2-diphenyl-1-picrylhydrazyl (DPPH●) assay were used to characterize and evaluate the antioxidant activity of nanocarriers. In addition, drug release profile was evaluated using two biorelevant media. The antioxidant activity of rosmarinic acid was maintained, suggesting the correct disposition of the moiety. Kinetic studies reveal that more morin is released in the simulated intestinal fluid than in the gastric one, while an anomalous non-Fickian release mechanism was observed. These results suggest a promising antioxidant nanocarrier suitable for future application in drug delivery.

Monodisperse Fe₃O₄/SiO₂ and Fe₃O₄/SiO₂/PPy Core-Shell Composite Nanospheres for IBU Loading and Release

The magnetic targeting drug delivery system is an effective way of targeting therapy. In this study, the monodisperse Fe₃O₄ nanoparticles with a particles size of about 180 nm were first prepared via a solvothermal method. Subsequently, the core-shell structure Fe₃O₄/SiO₂ and Fe₃O₄/SiO₂/polypyrrole (PPy) composite nanospheres were successfully synthesized by coating Fe₃O₄ nanoparticles with SiO₂ shell layer using the Stöber method and PPy shell by solvothermal method in turn. The as-prepared nanoparticles were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform-infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), thermogravimetric analysis (TGA), and Ultraviolet-Visible spectrophotometer (UV-Vis). The results indicated that the as-prepared composite nanospheres displayed a well-defined core-shell structure and monodispersity. The thicknesses of SiO₂ shell and PPy shell were ~6 nm and ~19 nm, respectively. Additionally, the as-prepared nanoparticles exhibited high saturation magnetization of 104 emu/g, 77 emu/g, and 24 emu/g, and have great potential applications in drug delivery. The drug loading and drug release of the Fe₃O₄/SiO₂ and Fe₃O₄/SiO₂/PPy composite nanospheres to ibuprofen (IBU) under stirring and ultrasonication were investigated. Their drug loading efficiency and drug release efficiency under ultrasonication were all higher than 33% and 90%, respectively. The drug release analyses showed sustained release of IBU from nanospheres and followed the Korsmeyer-Peppas model.