Synthesis of a Flower-Like g-C3N4/ZnO Hierarchical Structure with Improved CH4 Sensing Properties

Naphthalene Monoanhydride and Perylene Composites for Efficient Photocatalytic Hydrogen Evolution and Metal-Free Heterogeneous Oxidative Amidation

This study explores the synthesis of two visible light active organic chromophore-based composites using naphthalene monoanhydride (Np) and 1,7-dibromoperylene monoanhydride diester (PMDE). These chromophores feature favorable optical and electronic properties and polyaromatic skeletons with anhydride functionalities that facilitate π-π interactions between the chromophore and polymeric carbon nitride (CN) or covalent connections of chromophores with NH2 groups of CN. Accordingly, heterogeneous chromophore-CN composite photocatalysts namely, Np/CN(c) and PMDE/CN(c) were prepared by adopting in situ calcination (c) and composites Np/CN(a) and PMDE/CN(a) were prepared by ex situ physical adsorption (a) methods. In situ prepared Np/CN(c) and PMDE/CN(c) composites exhibited H2 evolution rates (HER) of 1069 and 705 μmol h-1 g-1, respectively, which are significantly higher than ex situ Np/CN(a) and PMDE/CN(a) composites with HER of 465 and 252 μmol h-1 g-1, respectively. These rates are 10, 7, 4.8, and 2.5 times higher than the bulk-CN, indicating the potential of these composites for efficient photocatalytic H2 evolution. Surface area normalized HER enhancements were 3.8, 5.3, 6.6, and 4.2 times higher for Np/CN(c), PMDE/CN(c), Np/CN(a), and PMDE/CN(a) respectively compared to bulk-CN. These composite photocatalysts exhibited excellent stabilities under prolonged photoirradiation, with H2 evolution consistently increasing with the light exposure time. Additionally, these metal-free heterogeneous composites demonstrated efficient photocatalytic activities towards oxidative amidation of aromatic aldehydes, with up to 80% product yields, establishing the prospects of combining homogeneous and heterogeneous entities in a metal-free active material in solar energy harvesting.

Enhancing Methane Gas Sensing through Defect Engineering in Ag-Ru Co-doped ZnO Nanorods

Detection of leaks of flammable methane (CH4) gas in a timely manner can mitigate health, safety, and environmental risks. Zinc oxide (ZnO), a polar semiconductor with controllable surface defects, is a promising material for gas sensing. In this study, Ag-Ru co-doped into self-assembled ZnO nanorod arrays (ZnO NRs) was prepared by a one-step hydrothermal method. The Ag-Ru co-doped sample shows a good hydrophobic property as a result of its particular microstructure, which results in high humidity resistance. In addition, oxygen vacancy density significantly increased after Ag-Ru co-doping. Density functional theory (DFT) calculations revealed an exceptionally high charge density accumulated at the Ru sites and the formation of a localized strong electric field, which provides additional energy for the CH4 reaction with •O2- at the surface at room temperature. Optimized AgRu0.025-ZnO demonstrated an outstanding CH4 sensing performance, with a limit of detection (LOD) as low as 2.24 ppm under free-heat and free-light conditions. These findings suggest that introducing defects into the ZnO lattice, such as oxygen vacancies and localized ions, offers a promising approach to improving the gas sensing performance.

Graphitic carbon nitride (g-C3N4)-assisted materials for the detection and remediation of hazardous gases and VOCs

Graphitic carbon nitride (g-C3N4)-based materials are attracting attention for their unique properties, such as low-cost, chemical stability, facile synthesis, adjustable electronic structure, and optical properties. These facilitate the use of g-C3N4 to design better photocatalytic and sensing materials. Environmental pollution by hazardous gases and volatile organic compounds (VOCs) can be monitored and controlled using eco-friendly g-C3N4- photocatalysts. Firstly, this review introduces the structure, optical and electronic properties of C3N4 and C3N4 assisted materials, followed by various synthesis strategies. In continuation, binary and ternary nanocomposites of C3N4 with metal oxides, sulfides, noble metals, and graphene are elaborated. g-C3N4/metal oxide composites exhibited better charge separation that leads to enhancement in photocatalytic properties. g-C3N4/noble metal composites possess higher photocatalytic activities due to the surface plasmon effects of metals. Ternary composites by the presence of dual heterojunctions improve properties of g-C3N4 for enhanced photocatalytic application. In the later part, we have summarised the application of g-C3N4 and its assisted materials for sensing toxic gases and VOCs and decontaminating NOx and VOCs by photocatalysis. Composites of g-C3N4 with metal and metal oxide give comparatively better results. This review is expected to bring a new sketch for developing g-C3N4-based photocatalysts and sensors with practical applications.

Sensing Properties of g-C3N4/Au Nanocomposite for Organic Vapor Detection

Alleviating the increasingly critical environmental pollution problems entails the sensing of volatile organic compounds (VOCs) as a hazardous factor for human health wherein the development of gas sensor platforms offers an efficient strategy to detect such noxious gases. Nanomaterials, particularly carbon-based nanocomposites, are desired sensing compounds for gas detection owing to their unique properties, namely a facile and affordable synthesis process, high surface area, great selectivity, and possibility of working at room temperature. To achieve that objective, g-C₃N₄ (graphitic carbon nitride) was prepared from urea deploying simple heating. The ensuing porous nanosheets of g-C₃N₄ were utilized as a substrate for loading Au nanoparticles, which were synthesized by the laser ablation method. g-C₃N₄ presented a sensing sensitivity toward organic vapors, namely methanol, ethanol, and acetone vapor gases, which were significantly augmented in the presence of Au nanoparticles. Specifically, the as-prepared nanocomposite performed well with regard to the sensing of methanol vapor gas and offers a unique strategy and highly promising sensing compound for electronic and electrochemical applications.

Highly Selective Gas Sensor Based on Litchi-like g-C3N4/In2O3 for Rapid Detection of H2

Hydrogen (H₂) has gradually become a substitute for traditional energy, but its potential danger cannot be ignored. In this study, litchi-like g-C₃N₄/In₂O₃ composites were synthesized by a hydrothermal method and used to develop H₂ sensors. The morphology characteristics and chemical composition of the samples were characterized to analyze the gas-sensing properties. Meanwhile, a series of sensors were tested to evaluate the gas-sensing performance. Among these sensors, the sensor based on the 3 wt% g-C₃N₄/In₂O₃ (the mass ratio of g-C₃N₄ to In₂O₃ is 3:100) showeds good response properties to H₂, exhibiting fast response/recovery time and excellent selectivity to H₂. The improvement in the gas-sensing performance may be related to the special morphology, the oxygen state and the g-C₃N₄/In₂O₃ heterojunction. To sum up, a sensor based on 3 wt% g-C₃N₄/In₂O₃ exhibits preeminent performance for H₂ with high sensitivity, fast response, and excellent selectivity.

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

Recent advances in g-C3N4 based gas sensors for the detection of toxic and flammable gases: a review

In recent years, many 2D nanomaterials like graphene, MoS2, phosphorene, and metal oxide nanosheets have been investigated for gas sensing applications due to their excellent properties. Amongst other 2D nanomaterials, graphitic carbon nitride (g-C3N4) has attracted significant attention owing to its simple synthesis process, tunable electronic properties, and exceptional physicochemical properties. Such remarkable properties assert g-C3N4 as a potential candidate for the next-generation high-performance gas sensors employed in the detection of toxic and flammable gases. Although several articles and reviews are available on g-C3N4 for their synthesis, functionalities, and applications for the detection of humidity. Few of them has focused their attention on gas sensing using g-C3N4. Thus, in this review, we have methodically summed up the recent advances in g-C3N4 and its composites-based gas sensor for the detection of toxic and flammable gases. Moreover, we have also incorporated the synthesis strategies and the comprehensive physics of g-C3N4 based gas sensors. Additionally, different approaches are presented for the enhancement of gas sensing/detecting properties of g-C3N4 based gas sensors. Finally, the challenges and future scope of g-C3N4 based gas sensors for real-time monitoring of gases have been discussed.

Design and development of highly sensitive PEDOT-PSS/AuNP hybrid nanocomposite-based sensor towards room temperature detection of greenhouse methane gas at ppb level

Herein, we present fabrication of a novel methane sensor based on poly (3,4-ethylenedioxythiophene:poly (styrene sulfonic acid)) (p-PEDOT-PSS) and gold nanoparticles (AuNPs) treated with dimethyl sulfoxide (DMSO) and Zonyl using a spin coating technique. The nanocomposite films were further post treated with H2SO4 to improve the charge transport mechanism. The structural and morphological features of the composites were analyzed through scanning electronic microscopy, transmission electron microscopy, Fourier transform infra-red spectroscopy, UV-Vis spectroscopy and thermogravimetric analysis. Treatment with organic solvents and post treatment of H2SO4 significantly enhances the conductivity of the composite to 1800 S cm-1. The fabricated sensor shows an excellent sensing response, fast response and recovery time along with acceptable selectivity towards methane gas at ppb concentrations. Due to a simple fabrication technique, excellent conductivity, superior sensing performance and improved mechanical properties, the sensor fabricated in this study could potentially be used to detect greenhouse methane gas at low concentrations.

Nanostructured metal oxide semiconductor-based sensors for greenhouse gas detection: progress and challenges

Climate change and global warming have been two massive concerns for the scientific community during the last few decades. Anthropogenic emissions of greenhouse gases (GHGs) have greatly amplified the level of greenhouse gases in the Earth's atmosphere which results in the gradual heating of the atmosphere. The precise measurement and reliable quantification of GHGs emission in the environment are of the utmost priority for the study of climate change. The detection of GHGs such as carbon dioxide, methane, nitrous oxide and ozone is the first and foremost step in finding the solution to manage and reduce the concentration of these gases in the Earth's atmosphere. The nanostructured metal oxide semiconductor (NMOS) based technologies for sensing GHGs emission have been found most reliable and accurate. Owing to their fascinating structural and morphological properties metal oxide semiconductors become an important class of materials for GHGs emission sensing technology. In this review article, the current concentration of GHGs in the Earth's environment, dominant sources of anthropogenic emissions of these gases and consequently their possible impacts on human life have been described briefly. Further, the different available technologies for GHG sensors along with their principle of operation have been largely discussed. The advantages and disadvantages of each sensor technology have also been highlighted. In particular, this article presents a comprehensive study on the development of various NMOS-based GHGs sensors and their performance analysis in order to establish a strong detection technology for the anthropogenic GHGs. In the last, the scope for improved sensitivity, selectivity and response time for these sensors, their future trends and outlook for researchers are suggested in the conclusion of this article.

Photocatalytic Properties of g-C3N4–Supported on the SrAl2O4:Eu,Dy/SiO2

Graphitic carbon nitride (g-C3N4) was supported on SrAl2O4:Eu,Dy-SiO2 by a colloidal-sol coating method to improve its light absorption property. Transmission electron microscopy (TEM) revealed that the nanoparticles of g-C3N4 were coated on sub-micron phosphor particles and nanoscale surface roughness was imparted by the SiO2-binder. Photoluminescence (PL) spectrum of the g-C3N4 supported on SrAl2O4:Eu,Dy exhibited a broadband emission from 400 to 650 nm. Increasing silica-binder in the g-C3N4/SrAl2O4:Eu,Dy composites suppressed the PL emission peak at 525 nm for SrAl2O4:Eu,Dy. Photocatalytic degradation activity was evaluated with 5 ppm methylene blue (MB) solutions under germicidal ultraviolet (UV) and visible (Vis) solar light illuminations. The UV/Vis photocatalytic efficiency was improved by supporting g-C3N4 on the SrAl2O4:Eu,Dy phosphor and with the addition of SiO2 as a binder. In addition, low silica addition effectively improved the adhesiveness of the g-C3N4 coating on the SrAl2O4:Eu,Dy surface. Recyclability tests of photocatalysis for the SrAl2O4:Eu,Dy-0.01M SiO2/50wt% g-C3N4 composites exhibited a remarkable stability by maintaining the degradation efficiencies above 90% in four cycles. Therefore, the composite of g-C3N4-supported SrAl2O4:Eu,Dy-SiO2 is a prospective photocatalyst activating under UV/Vis light irradiation for the elimination of environmental pollutants.

Influence of High Temperature Synthesis on the Structure of Graphitic Carbon Nitride and Its Hydrogen Generation Ability

Graphitic carbon nitride (g-C₃N₄) was obtained by thermal polymerization of dicyandiamide, thiourea or melamine at high temperatures (550 and 600 °C), using different heating rates (2 or 10 °C min⁻¹) and synthesis times (0 or 4 h). The effects of the synthesis conditions and type of the precursor on the efficiency of g-C₃N₄ were studied. The most efficient was the synthesis from dicyandiamide, 53%, while the efficiency in the process of synthesis from melamine and thiourea were much smaller, 26% and 11%, respectively. On the basis of the results provided by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–vis), thermogravimetric analysis (TGA), elemental analysis (EA), the best precursor and the optimum conditions of synthesis of g-C₃N₄ were identified to get the product of the most stable structure, the highest degree of ordering and condensation of structure and finally the highest photocatalytic activity. It was found that as the proton concentration decreased and the degree of condensation increased, the hydrogen yields during the photocatalytic decomposition of water–methanol solution were significantly enhanced. The generation of hydrogen was 1200 µmol g⁻¹ and the selectivity towards hydrogen of more than 98%.

CuS nanoparticles anchored to g-C3N4 nanosheets for photothermal ablation of bacteria

Antibiotic resistance has already been recognized as one of the greatest threats to human beings' health, and thus it is highly desirable to develop new bactericidal approaches. The photothermal antibacterial process based on the photo-to-thermal conversion using semiconducting materials is currently extensively studied owing to its high efficiency, long durability and environmental benignity. In this study, we fabricated copper sulfide (CuS) nanoparticle-decorated graphitic carbon nitride (g-C3N4) nanosheets, denoted as the PEG-CuS@g-C3N4 nanocomposite, via a simple hydrothermal process. Materials characterization showed that CuS nanoparticles were uniformly distributed on the surface of g-C3N4 without agglomeration. Moreover, the nanocomposite exhibited excellent photothermal conversion efficiency (up to 59.64%) due to its strong near-infrared (NIR) absorption characteristics. The antibacterial efficiency evaluation indicated that the PEG-CuS@g-C3N4 nanocomposite could effectively kill the Gram-positive Staphylococcus aureus (S. aureus) and the Gram-negative Escherichia coli (E. coli). We found that up to 99% of both S. aureus and E. coli could be killed in a 200 μg ml-1 PEG-CuS@g-C3N4 suspension within 20 min of NIR irradiation. Moreover, the cytotoxicity of the PEG-CuS@g-C3N4 nanocomposite was evaluated using the mouse skin fibroblast NIH-3T3 cells, and the nanocomposite was found to display acceptable biocompatibility. We believe that the PEG-CuS@g-C3N4 nanocomposite is of significant interest for rapid bacteria-killing, and would gain promising applications for sterilization.