Effect of TiO2-ZnO-MgO Mixed Oxide on Microbial Growth and Toxicity against Artemia salina

Facile synthesis of carbon/titanium oxide quantum dots from lignocellulose-rich mandarin orange peel extract via microwave irradiation: Synthesis, characterization and bio-imaging application

A nanohybrid prepared from the lignocellulosic residue is a feasible approach to synthesize blue light emitting fluorescent doped TiO₂ quantum dot nanocomposite (C-TiO₂ QDs) by microwave techniques using Mandarin orange (Citrus reticulata) peel powder with titanium isopropoxide precursors. With a greater orange peel colloidal medium, the structure of the TiO₂-NPs changed from a mixture of rutile and anatase phases to exclusively the anatase phase. The optical and morphological properties of as-prepared C-TiO₂ QDs were characterized by HR-TEM, XRD, FT-IR, UV-visible, PL spectra, DLS, and Zeta potential techniques. The reaction condition was optimized by changing substrate composition, pH, and reaction time. C-TiO₂ QDs exhibit outstanding stability at pH 7 and remain sustained for at least 180 days without aggregation. As prepared C-TiO₂ QDs have distinct emission and excitation activities with an average particle size of 2.8 nm. Cell viability was performed on normal L929 cells, where it showed excellent biocompatibility (<90 %) even at the concentration of 200 μg/mL after 24 h treatment. Additionally, the synthesized C-TiO₂ QDs were used with L929 cells as a fluorescent probe for bio-imaging applications. The results revealed that neither of the cell lines' morphologies had significantly changed, proving the biocompatibility of the synthetic C-TiO₂ QDs.

Genotoxicity in Artemia spp.: An old model with new sensitive endpoints

Artemia spp. represent models species widely used in ecotoxicological studies due to its simple and fast manipulation in laboratory conditions that makes this crustacean well adaptable to several methodological approaches. Although cysts hatching, swimming behavior, reproductive success and mortality are the main endpoints used for the determination of toxicity, the detection of slight alterations induced by certain substances found at low concentrations in the environment may require more sensitive biomarkers. For this reason, the identification of DNA or chromosomal damages has been proposed as an additional and appreciable endpoint for the ecotoxicological assessment of environmental chemicals. Concerning Artemia models, only few studies indicated that the exposure to organic and inorganic compounds (i.e. pesticides, nanoparticles, bacterial products or heavy metals) can reduce the survival and fitness through the onset of DNA breaks or the dysregulation of key genes. In contrast, literature research revealed a lot of works primarily focusing on the mortality and hatching rates of Artemia nauplii and cysts despite the well-known low sensitivity of these species. The present review reports the current state of knowledge concerning the effects induced by various chemicals, including organic and inorganic compounds, on the common parameters and genotoxicity in both Artemia franciscana and Artemia salina. Advantages and limitations of Artemia spp. models in eco-toxicological investigations together with the most used classes of compounds are briefly discussed. Moreover, a mention is also addressed to scarce availability of literature data focusing on genotoxic effects and the great reliability of molecular approaches observed in this poorly sensitive model organism. Thus, the opportunity to take advantage of genotoxic analyses has also been highlighted, by suggesting this approach as a novel endpoint to be used for the eco-toxicological assessment of several stressors.

Titanium dioxide nanoparticles: Recent progress in antimicrobial applications

For decades, the antimicrobial applications of nanoparticles (NPs) have attracted the attention of scientists as a strategy for controlling the ever-increasing threat of multidrug-resistant microorganisms. The photo-induced antimicrobial properties of titanium dioxide (TiO₂ ) NPs by ultraviolet (UV) light are well known. This review elaborates on the modern methods and antimicrobial mechanisms of TiO₂ NPs and their modifications to better understand and utilize their potential in various biomedical applications. Additional compounds can be grafted onto TiO₂ nanomaterial, leading to hybrid metallic or non-metallic materials. To improve the antimicrobial properties, many approaches involving TiO₂ have been tested. The results of selected studies from the past few years covering the most recent trends in this field are discussed in this review. There is extensive evidence to show that TiO₂ NPs can exhibit certain antimicrobial features with disputable roles of UV light. Hence, they are effective in treating bacterial infections, although the majority of these conclusions came from in vitro studies and in the presence of some additional nanomaterials. The methods of evaluation varied depending on the nature of the research while researchers incorporated different techniques, including determining the minimum inhibitory concentration, cell count, and using disk and well diffusion methods, with a noticeable indication that cell count was the most and dominant criterion used to evaluate the antimicrobial activity. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Extraction of Acetogenins Using Thermosonication-Assisted Extraction from Annona muricata Seeds and Their Antifungal Activity

The objective of this work was to find the optimal conditions by thermosonication-assisted extraction (TSAE) of the total acetogenin content (TAC) and yield from A. muricata seeds, assessing the effect of the temperature (40, 50, and 60 °C), sonication amplitude (80, 90, and 100%), and pulse-cycle (0.5, 0.7, and 1 s). In addition, optimal TSAE conditions of acetogenins (ACGs) were compared with extraction by ultrasound at 25 °C and the soxhlet method measuring TAC and antioxidant capacity. Moreover, solubility and identification of isolated ACGs were performed. Furthermore, the antifungal activity of ACGs crude extract and isolated ACGs was evaluated. Optimal TSAE conditions to extract the highest TAC (35.89 mg/g) and yield (3.6%) were 50 °C, 100% amplitude, and 0.5 s pulse-cycle. TSAE was 2.17-fold and 15.60-fold more effective than ultrasound at 25 °C and the Soxhlet method to extract ACGs with antioxidant capacity. Isolated ACGs were mostly soluble in acetone and methanol. Seven ACGs were identified, and pseudoannonacin was the most abundant. The inhibition of Candida albicans, Candida krusei, and Candida tropicalis was higher from isolated ACGs than crude extract. TSAE was effective to increase the yield in the ACGs extraction from A. muricata seeds and these ACGs have important antifungal activity.

Impacts of nano-titanium dioxide toward Vallisneria natans and epiphytic microbes

In this study, Vallisneria natans plants were exposed to 5 and 20 nm of titanium dioxide nanoparticles (TiO₂ NPs) anatase and 600-1000 nm of bulk at 5 and 20 mg/L for 30 days. SEM images and EDX spectra revealed that epiphytic biofilms were more prone to TiO₂ NPs adhesion than bare plant leaves. TiO₂ NPs injured plant leaf cells, ruptured epiphytic diatoms membranes and increased the ratio of free-living microbes. The TN, NH₄⁺-N and NO₃--N concentrations significantly decreased, respectively, by 44.9%, 33.6%, and 23.6% compared to bulk treatments after 30 days due to macrophyte damage and a decline in diversity of epiphytic bacterial community and abundance of nitrogen cycle bacteria. TiO₂ NPs size-dependent decrease in bacterial relative abundance was detected, including phylum Cyanobacteria, Planctomycetes, and Verrucomicrobia. Although TiO₂ NPs increased eukaryotic diversity and abundance, abundances of Bacillariophyceae and Vampyrellidae classes and Gastrotricha and Phragmoplastophyta phylum decreased significantly under TiO₂ NPs exposure compared to bulk and control. TiO₂ NPs reduced intensities of interaction relationships among epiphytic microbial genera. This study shed new light on the potential effects of TiO₂ NPs toxicity toward aquatic plants and epiphytic microbial communities and its impacts on nitrogen species removal in wetlands.

Gómez C, Pérez-Larios A. Study of the Interaction of Ti-Zn as a Mixed Oxide at Different pH Values Synthesized by the Sol-Gel Method and Its Antibacterial Properties

TiO2, ZnO, and their combination (TiO2−ZnO) at different molar ratios and pH values (Ti−Zn A and B 3:1, 1:1, and 1:3) via the sol−gel method were characterized by SEM, XRD, UV-Vis, and FT-IR. Moreover, antibacterial tests of the nanoparticles were conducted against Escherichia coli (E. coli), Salmonella paratyphi (S. paratyphi), Staphylococcus aureus (S. aureus), and Listeria monocytogenes (L. monocytogenes). The indirect bandgap of the Ti−Zn binary oxide synthesized in the basic process at molar ratios of 3:1, 1:1, and 1:3 exhibited a higher eV (3.31, 3.30, and 3.19 eV, respectively) compared to pure TiO2 (3.2 eV) and synthesized in the acid process (3.22, 3.29, and 3.19 eV at same molar ratio, respectively); in addition, the results of the indirect bandgap were interesting due to a difference found by other authors. Moreover, the sol−gel method promoted the formation of a spherical, semi-sphere, and semi-hexagonal shape (TiO2, Ti−Zn 1:1, and Ti−Zn 1:3) with a size ≤ 150 nm synthesized during the acid process, with a crystallite size of ~71, ~12, ~34, and ~21 nm, respectively, while ZnO NPs developed a hexagonal and large size (200−800 nm) under the same synthesis process (acid). Samples were classified as TiO2 anatase phase (basic synthesis); however, the presented changes developed in the rutile phase (24% rutile phase) at an acid pH during the synthesis process. Moreover, Ti−Zn maintained the anatase phase even with a molar ratio of 1:3. The most interesting assessment was the antibacterial test; the Ti−Zn A (1:3) demonstrated a bacteriostatic effect compared with all treatments except ZnO, which showed a similar effect in dark conditions, and only Gram-positive bacteria were susceptible (Listeria monocytogenes > Staphylococcus aureus). Therefore, the Ti−Zn characteristic suggests that the results have potential in treating wastewater as well as in pharmaceutical (as drug carriers) and medical applications.

Effect of TiO2 on Selected Pathogenic and Opportunistic Intestinal Bacteria

Food-grade titanium dioxide (TiO₂) containing a nanoparticle fraction (TiO₂ NPs-nanoparticles) is widely used as a food additive (E171 in the EU). In recent years, questions concerning its effect on the gastrointestinal microbiota have been raised. In the present study, we examined interactions between bacteria and TiO₂. The study involved six pathogenic/opportunistic bacterial strains and four different-sized TiO₂ types: three types of food-grade E171 compounds and TiO₂ NPs (21 nm). Each bacterial strain was exposed to four concentrations of TiO₂ (60, 150, 300, and 600 mg/L TiO₂). The differences in the growth of the analyzed strains, caused by the type and concentration of TiO₂, were observed. The growth of a majority of the strains was shown to be inhibited after exposure to 300 and 600 mg/L of the food-grade E171 and TiO₂ NPs.

Photocatalytic Degradation of Rhodamine B and Methylene Orange Using TiO2-ZrO2 as Nanocomposite

The present research reports the synthesis of ZrO2-doped TiO2 photocatalysts at different ZrO2 contents (1, 3 and 5% wt.) synthesized by the sol–gel method. The samples were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction, attenuated total reflectance-Fourier transform infrared, ultraviolet–visible, X-ray photoelectron spectroscopy and N2 adsorption–desorption analysis. The photocatalytic activity of the ZrO2-doped TiO2 was investigated against the dyes methyl orange and rhodamine B through mineralization studies. The ZrO2-doped TiO2 samples presented a semiglobular-ovoid agglomerate shape around 500–800 nm. The samples presented high crystallinity of the TiO2 anatase phase, XPS suggested the formation of Zr–O–Ti bonds and the samples were classified as mesoporous materials with slight changes in the optical features in comparison with pure TiO2. Our study shows that the ZrO2-doped TiO2 composites exhibited a higher photocatalytic activity than just utilizing the synthetized TiO2 and a commercial P25. The different degradation behaviors are attributed to differences in the textural properties, and to the different optical absorptions of the samples due to structural defects created by the level of doping of Zr4+ ions into the TiO2 lattice. Reaction kinetics parameters were calculated by the Langmuir–Hinshelwood model, and a third run cycle of the ZrO2-doped TiO2 at 1% wt. achieved a photocatalytic degradation of 78.1 and 75.5% for RhB and MO, respectively.

Polysaccharide-Based Packaging Functionalized with Inorganic Nanoparticles for Food Preservation

Functionalization of polysaccharide-based packaging incorporating inorganic nanoparticles for food preservation is an active research area. This review summarizes the use of polysaccharide-based materials functionalized with inorganic nanoparticles (TiO2, ZnO, Ag, SiO2, Al2O3, Fe2O3, Zr, MgO, halloysite, and montmorillonite) to develop hybrid packaging for fruit, vegetables, meat (lamb, minced, pork, and poultry), mushrooms, cheese, eggs, and Ginkgo biloba seeds preservation. Their effects on quality parameters and shelf life are also discussed. In general, treated fruit, vegetables, mushrooms, and G. biloba seeds markedly increased their shelf life without significant changes in their sensory attributes, associated with a slowdown effect in the ripening process (respiration rate) due to the excellent gas exchange and barrier properties that effectively prevented dehydration, weight loss, enzymatic browning, microbial infections by spoilage and foodborne pathogenic bacteria, and mildew apparition in comparison with uncoated or polysaccharide-coated samples. Similarly, hybrid packaging showed protective effects to preserve meat products, cheese, and eggs by preventing microbial infections and lipid peroxidation, extending the food product’s shelf life without changes in their sensory attributes. According to the evidence, polysaccharide-hybrid packaging can preserve the quality parameters of different food products. However, further studies are needed to guarantee the safe implementation of these organic–inorganic packaging materials in the food industry.

Protein–TiO2: A Functional Hybrid Composite with Diversified Applications

Functionalization of protein-based materials by incorporation of organic and inorganic compounds has emerged as an active research area due to their improved properties and diversified applications. The present review provides an overview of the functionalization of protein-based materials by incorporating TiO2 nanoparticles. Their effects on technological (mechanical, thermal, adsorptive, gas-barrier, and water-related) and functional (antimicrobial, photodegradation, ultraviolet (UV)-protective, wound-healing, and biocompatibility) properties are also discussed. In general, protein–TiO2 hybrid materials are biodegradable and exhibit improved tensile strength, elasticity, thermal stability, oxygen and water resistance in a TiO2 concentration-dependent response. Nonetheless, they showed enhanced antimicrobial and UV-protective effects with good biocompatibility on different cell lines. The main applications of protein–TiO2 are focused on the development of eco-friendly and active packaging materials, biomedical (tissue engineering, bone regeneration, biosensors, implantable human motion devices, and wound-healing membranes), food preservation (meat, fruits, and fish oil), pharmaceutical (empty capsule shell), environmental remediation (removal and degradation of diverse water pollutants), anti-corrosion, and textiles. According to the evidence, protein–TiO2 hybrid composites exhibited potential applications; however, standardized protocols for their preparation are needed for industrial-scale implementation.

Are Titania Photocatalysts and Titanium Implants Safe? Review on the Toxicity of Titanium Compounds

Titanium and its compounds are broadly used in both industrial and domestic products, including jet engines, missiles, prostheses, implants, pigments, cosmetics, food, and photocatalysts for environmental purification and solar energy conversion. Although titanium/titania-containing materials are usually safe for human, animals and environment, increasing concerns on their negative impacts have been postulated. Accordingly, this review covers current knowledge on the toxicity of titania and titanium, in which the behaviour, bioavailability, mechanisms of action, and environmental impacts have been discussed in detail, considering both light and dark conditions. Consequently, the following conclusions have been drawn: (i) titania photocatalysts rarely cause health and environmental problems; (ii) despite the lack of proof, the possible carcinogenicity of titania powders to humans is considered by some authorities; (iii) titanium alloys, commonly applied as implant materials, possess a relatively low health risk; (iv) titania microparticles are less toxic than nanoparticles, independent of the means of exposure; (v) excessive accumulation of titanium in the environment cannot be ignored; (vi) titanium/titania-containing products should be clearly marked with health warning labels, especially for pregnant women and young children; (vi) a key knowledge gap is the lack of comprehensive data about the environmental content and the influence of titania/titanium on biodiversity and the ecological functioning of terrestrial and aquatic ecosystems.

Metal Oxide Nanoparticles Against Bacterial Biofilms: Perspectives and Limitations

At present, there is an urgent need in medicine and industry to develop new approaches to eliminate bacterial biofilms. Considering the low efficiency of classical approaches to biofilm eradication and the growing problem of antibiotic resistance, the introduction of nanomaterials may be a promising solution. Outstanding antimicrobial properties have been demonstrated by nanoparticles (NPs) of metal oxides and their nanocomposites. The review presents a comparative analysis of antibiofilm properties of various metal oxide NPs (primarily, CuO, Fe3O4, TiO2, ZnO, MgO, and Al2O3 NPs) and nanocomposites, as well as mechanisms of their effect on plankton bacteria cells and biofilms. The potential mutagenicity of metal oxide NPs and safety problems of their wide application are also discussed.

Iron and zinc ions, potent weapons against multidrug-resistant bacteria

Drug-resistant bacteria are becoming an increasingly widespread problem in the clinical setting. The current pipeline of antibiotics cannot provide satisfactory options for clinicians, which brought increasing attention to the development and application of non-traditional antimicrobial substances as alternatives. Metal ions, such as iron and zinc ions, have been widely applied to inhibit pathogens through different mechanisms, including synergistic action with different metabolic enzymes, regulation of efflux pumps, and inhibition of biofilm formation. Compared with traditional metal oxide nanoparticles, iron oxide nanoparticles (IONPs) and zinc oxide nanoparticles (ZnO-NPs) display stronger bactericidal effect because of their smaller ion particle sizes and higher surface energies. The combined utilization of metal NPs (nanoparticles) and antibiotics paves a new way to enhance antimicrobial efficacy and reduce the incidence of drug resistance. In this review, we summarize the physiological roles and bactericidal mechanisms of iron and zinc ions, present the recent progress in the research on the joint use of metal NPs with different antibiotics, and highlight the promising prospects of metal NPs as antimicrobial agents for tackling multidrug-resistant bacteria.