Improving the Physical and Oxidative Stability of Emulsions Using Mixed Emulsifiers: Casein-Octenyl Succinic Anhydride Modified Starch Combinations

Microstructural studies of imitation cheese with a shift in continuous phase

When casein is replaced with starch in imitation cheese, the functionality changes. Three different microscopy methods were applied to understand the microstructural differences in the product depending on which component dominates the microstructure. Confocal Laser Scanning Microscopy (CLSM) for component identification. Scanning Electron Microscopy (SEM) and Cryogenic Scanning Electron Microscopy (Cryo-SEM) for studying surface structures. Differences in the surface structures were detected between SEM and Cryo-SEM. In SEM, starch appeared rough and protein smooth, while in Cryo-SEM no starch roughness of the surface was found. A change in starch modification and effects of protein prehydration was also analysed. Adding octenyl succinic anhydride (OSA) modified starch for emulsifying properties resulted in a microstructure with fragmented protein at a protein level of 7 %, but not at 9 or 12 %. Protein prehydration had limited effect on microstructure. On a macrostructural level, the change to an emulsifying starch increased hardness in imitation cheese with 7 and 9 % protein. Protein prehydration slightly decreased the hardness, but the difference was not significant at all concentrations. This research provides valuable information about the microstructure of imitation cheese at a 50/50 composition, how the microstructure changes with an emulsifying starch and what occurs after a protein prehydration was included in the production.

Preparation and characterisation of linalool oil-in-water starch-based Pickering emulsions and the effects of the addition of cellulose nanocrystals on their stability

Creaming could be generated during storage of the starch-based Pickering emulsions. And cellulose nanocrystals in the solution are usually dispersed by relatively strong mechanical force, otherwise they may appear in the form of aggregates. In this work, we investigated the effects of cellulose nanocrystals on the stability of the starch-based Pickering emulsions. Results showed that the stability of Pickering emulsions was significantly improved by adding cellulose nanocrystals. Cellulose nanocrystals increased the viscosity, electrostatic repulsion and steric hindrance of the emulsions, which delayed the movement of droplets and obstructed the contact between droplets. This study provides new insights into the preparation and stabilisation of starch-based Pickering emulsions.

Low-Field NMR Analyses of Gels and Starch-Stabilized Emulsions with Modified Potato Starches

Many different biopolymers are used to stabilize emulsions, of which starch is of particular concern. To improve the characteristics and technical utility of native starch, various types of changes can be made. This article is a report describing the molecular dynamics of water by the low-field nuclear magnetic resonance (LF NMR) of chemically (E 1412 and E 1420) and physically modified starch (LU 1432) gels and the effect of their use on the stability of oil/water emulsions obtained using bovine and porcine fats. The analysis of changes in spin–spin and spin–lattice relaxation times over time showed that the presence of the type of starch modification significantly affects the values of T1 and T2 relaxation times, as well as the correlation times. Research on time-related changes in water binding in oil-in-water emulsions showed that potato starch modified by chemical methods can be used as an emulsifier. Compared to physically modified starch, chemically modified starches have a much better water-binding capacity.

Recent progress in fish oil-based emulsions by various food-grade stabilizers: Fabrication strategy, interfacial stability mechanism and potential application

Fish oil, rich in a variety of long-chain ω-3 PUFAs, is widely used in fortified foods due to its broad-spectrum health benefits. However, its undesired characteristics include oxidation sensitivity, poor water solubility, and fishy off-flavor greatly hinder its exploitation in food field. Over the past two decades, constructing fish oil emulsions to encapsulate ω-3 PUFAs for improving their physicochemical and functional properties has undergone great progress. This review mainly focuses on understanding the fabrication strategies, stabilization mechanism, and potential applications of fish oil emulsions, including fish oil microemulsions, nanoemulsions, double emulsions, Pickering emulsions and emulsion gels. Furthermore, the role of oil-water interfacial stabilizers in the fish oil emulsions stability will be discussed with a highlight on food-grade single emulsifiers and natural complex systems for achieving this purpose. Additionally, its roles and applications in food industry and nutrition field are delineated. Finally, possible innovative food trends and applications are highlighted, such as novel fish oil-based delivery systems construction (e.g., Janus emulsions and nutraceutical co-delivery systems), exploring digestion and absorption mechanisms and enhancing functional evaluation (e.g., nutritional supplement enhancer, and novel fortified/functional foods). This review provides a reference for the application of fish oil-based emulsion systems in future precision diet intervention implementations.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.

Fabrication and characterization of a cannabidiol-loaded emulsion stabilized by a whey protein-maltodextrin conjugate and rosmarinic acid complex

A cannabidiol (CBD)-loaded oil-in-water emulsion stabilized by a whey protein (WP)-maltodextrin (MD) conjugate and rosmarinic acid (RA) complex was fabricated, and its stability characteristics were investigated under various environmental conditions. The WP-MD conjugates were formed via dry-heating. The interaction between WP and MD was assessed by browning intensity, reduced amount of free amino groups, the formation of high molecular weight components in sodium dodecyl sulfate-PAGE, and changes in secondary structure of whey proteins. The WP-MD-RA noncovalent complex was prepared and confirmed by fluorescence quenching and Fourier-transform infrared spectroscopy spectra. Emulsions stabilized by WP, WP-MD, and WP-RA were used as references to evaluate the effect of WP-MD-RA as a novel emulsifier. Results showed that WP-MD-RA was an effective emulsifier to produce fine droplets for a CBD-loaded emulsion and remarkably improved the pH and salt stabilities of emulsions in comparison with WP. An emulsion prepared with WP-MD-RA showed the highest protection of CBD against UV and heat-induced degradation among all emulsions. The ternary complex kept emulsions in small particle size during storage at 4°C. Data from the current study may offer useful information for designing emulsion-based delivery systems which can protect active substance against environmental stresses.

Enhancement of the Stability of Encapsulated Pomegranate (Punica granatum L.) Peel Extract by Double Emulsion with Carboxymethyl Cellulose

Pomegranate peel enriched with high value of bioactive phenolics with valuable health benefits. However, after extraction of the phenolic compounds, diverse factors can affect their stability. Therefore, we, herein, aimed to prepare W1/O/W2 double nanoemulsions loaded with phenolic-rich extract from pomegranate peel in the W1 phase. Double emulsions were fabricate during a two-step emulsification technique. Furthermore, the influence of sodium carboxymethyl cellulose (CMC) in the outer aqueous phase was also investigated. We found that W1/O/W2 emulsions containing phenolic-rich extract showed good physical stability, especially in the particle size, polydispersity index, zeta potential, and creaming index. Intriguingly, high encapsulation rates of pomegranate polyphenols >95% were achieved; however, emulsion with CMC had the best encapsulation stability during storage. Thus, our study provides helpful information about the double nanoemulsions delivery system for polyphenols generated from pomegranate peel, which may lead to the development of innovative polyphenol-enriched functional foods.

Impact on stabilization of ionic gum emulsions by natural and thermally modified Chironji gum

Ionic gums like acacia and tragacanth are known for their emulsifying properties but lower viscosity limits its use. This study explores the effects of natural chironji gum and its thermally modified form on the emulsifying properties of acacia and tragacanth. Formulations of chironji gum (CG) O/W emulsion FA1-FA4 were prepared with acacia and FT1-FT4 with tragacanth respectively. Heat treated gums(CGTs) were obtained by heating CG at 110 °C for time intervals 24 h, 48 h and 96 h. Similarly formulations FHA1-FHA12 and FHT1-FHT12 were prepared with acacia and tragacanth replacing CG with heat treated gums. Heat treated gum formulations showed better stabilizing properties than natural CG emulsions. The FA1-FA4 and FT1-FT4 formulations had droplet size in the range of 9.77-26.55 μm and zeta potential ranging from -14.8 mV to -23.2 mV. In contrast, the droplet size and zeta potential of FHA1-FHA12 and FHT1-FHT12 were in range of 1.42-17.5 μm and -17.2 mV to -40.6 mV respectively signifying improved stabilizing capacity of CGT gums. The droplet size and zeta potential of these formulations remained stable even after 7 days of storage at room temperature with no visible phase separation of the formulation observed for more than a month.

Interfacial Engineering of Pickering Emulsion Co-Stabilized by Zein Nanoparticles and Tween 20: Effects of the Particle Size on the Interfacial Concentration of Gallic Acid and the Oxidative Stability

Lipid oxidation is still one of the major food-safety issues associated with the emulsion-based food systems. Engineering the interfacial region is an effective way to improve the oxidative stability of emulsion. Herein, a novel Pickering emulsion with strong oxidative stability was prepared by using zein nanoparticles and Tween 20 as stabilizers (ZPE). The modulation effects of the particle size on the distribution of gallic acid (GA) and the oxidative stability of ZPE were investigated. In the absence of GA, Pickering emulsions stabilized with different sizes of zein nanoparticles showed similar oxidative stability, and the physical barrier effect took the dominant role in retarding lipid oxidation. Moreover, in the presence of GA, ZPE stabilized by zein nanoparticles with the averaged particle size of 130 nm performed stronger oxidation than those stabilized by zein nanoparticles of 70 and 220 nm. Our study revealed that the interfacial concentration of GA (GA_I) was tuned by zein nanoparticles due to the interaction between them, but the difference in the binding affinity between GA and zein nanoparticles was not the dominant factor regulating the (GA_I). It was the interfacial content of zein nanoparticles (Γ), which was affected by the particle size, modulated the (GA_I) and further dominated the oxidative stability of ZPEs. The present study suggested that the potential of thickening the interfacial layer to prevent lipid oxidation was limited, increasing the interfacial concentration of antioxidant by interfacial engineering offered a more efficient alternative.

Recent advances in polysaccharides stabilized emulsions for encapsulation and delivery of bioactive food ingredients: A review

Many bioactive food ingredients were encapsulated in different forms to improve their stability and bioavailability. Emulsions have showed excellent properties in encapsulation, controlled release, and targeted delivery of bioactives. Polysaccharides are widely available and have different structures with different advantages including non-toxic, easily digested, biocompatible and can keep stable over a wide range of pH and temperatures. In this review, the most common polysaccharides and polysaccharide based complexes as emulsifiers to stabilize emulsions in recent ten years are described. The close relationships between the types and structures of polysaccharides and their emulsifying capacities are discussed. In addition, the absorption and bioavailability of bioactive food components loaded in polysaccharide stabilized emulsions are summarized. The main goal of the review is to emphasize the important roles of polysaccharides in stabilizing emulsions. Moreover, speculations regarded to some issues for the further exploration and possible onward developments of polysaccharides stabilized emulsions are also discussed.