Synthesis of Porous Organic Polymers with Tunable Amine Loadings for CO2 Capture: Balanced Physisorption and Chemisorption

Facile synthesis of anthranilic acid based dual functionalized novel hyper cross-linked polymer for promising CO2 capture and efficient Cr3+ adsorption

A novel hyper cross-linked polymer of 2-Aminobenzoic acid (HCP-AA) is synthesized for the adsorption of Cr3+ and CO2. The Brunauer-Emmett-Teller surface area of HCP-AA is 615 m2 g-1. HCP-AA of particle size 0.5 nm showed maximum adsorption of Cr3+ for lab prepared wastewater (93%) while it was 88% for real industrial wastewater. It is might be due to electrostatic interactions, cation-π interactions, lone pair interactions and cation exchange at pH 7; contact time of 8 min; adsorbent dose 0.8 g. The adsorption capacity was calculated 52.63 mg g-1 for chromium metal ions at optimum conditions. Freundlich isotherm studies R2 = 0.9273 value is the best fit and follows pseudo second order kinetic model (R2 = 0.979). The adsorption is found non-spontaneous and exothermic through thermodynamic calculations like Gibbs free energy (ΔG), enthalpy change (ΔH) and entropy change (ΔS) were 6.58 kJ mol-1, - 60.91 kJ mol-1 and - 45.79 kJ mol-1 K-1, respectively. The CO2 adsorption capacity of HCP-AA is 1.39 mmol/g with quantity of 31.1 cm3/g (6.1 wt%) at 273Kwhile at 298 K adsorption capacity is 1.12 mmol/g with quantity 25.2 cm3/g (5 wt%). Overall, study suggests that carboxyl (-COOH) and amino (-NH2) groups may be actively enhancing the adsorption capacity of HCP-AA for Cr3+ and CO2.

3D porous polymers for selective removal of CO2 and H2 storage: experimental and computational studies

In this article, newly designed 3D porous polymers with tuned porosity were synthesized by the polycondensation of tetrakis (4-aminophenyl) methane with pyrrole to form M1 polymer and with phenazine to form M2 polymer. The polymerization reaction used p-formaldehyde as a linker and nitric acid as a catalyst. The newly designed 3D porous polymers showed permanent porosity with a BET surface area of 575 m2/g for M1 and 389 m2/g for M2. The structure and thermal stability were investigated by solid 13C-NMR spectroscopy, Fourier-transform infrared (FT-IR) spectroscopy, and thermogravimetric analysis (TGA). The performance of the synthesized polymers toward CO2 and H2 was evaluated, demonstrating adsorption capacities of 1.85 mmol/g and 2.10 mmol/g for CO2 by M1 and M2, respectively. The importance of the synthesized polymers lies in their selectivity for CO2 capture, with CO2/N2 selectivity of 43 and 51 for M1 and M2, respectively. M1 and M2 polymers showed their capability for hydrogen storage with a capacity of 66 cm3/g (0.6 wt%) and 87 cm3/g (0.8 wt%), respectively, at 1 bar and 77 K. Molecular dynamics (MD) simulations using the grand canonical Monte Carlo (GCMC) method revealed the presence of considerable microporosity on M2, making it highly selective to CO2. The exceptional removal capabilities, combined with the high thermal stability and microporosity, enable M2 to be a potential material for flue gas purification and hydrogen storage.

Amine functionalized benzene based hypercrosslinked polymer as an adsorbent for CO2/N2 adsorption

In this work, benzene based hypercrosslinked polymer (HCP) as an adsorbent was modified using amine group to enhance CO₂ uptake capability and selectivity. Based on BET analysis result, the HCP and the modified HCP provide surface area of 806 (m² g^-1) and micropore volume of 453 (m² g^-1) and 0.19 (cm³ g^-1) and 0.14 (cm³ g^-1), respectively. The CO₂ and N₂ gases adsorption were performed in a laboratory scale reactor at a temperature between 298 and 328 K and pressure up to 9 bar. The experimental data were evaluated using isotherm, kinetic and thermodynamic models to identify the absorbent behavior. The maximum CO₂ adsorption capacity at 298 K and 9 bar was obtained 301.67 (mg g^-1) for HCP and 414.41 (mg g^-1) for amine modified HCP. The CO₂ adsorption thermodynamic parameters assessment including enthalpy changes, entropy changes, and Gibbs free energy changes at 298 K were resulted - 14.852 (kJ mol^-1), - 0.024 (kJ mol^-1 K^-1), - 7.597 (kJ mol^-1) for HCP and - 17.498 (kJ mol^-1), - 0.029(kJ mol^-1 K^-1), - 8.9 (kJ mol^-1) for amine functionalized HCP, respectively. Finally, the selectivity of the samples were calculated at a CO₂/N₂ composition of 15:85 (v/v) and 43% enhancement in adsorption selectivity at 298 K was obtained for amine modified HCP.

Transforming Porous Silica Nanoparticles into Porous Liquids with Different Canopy Structures for CO2 Capture

Porous liquids (PLs) have both liquid fluidity and solid porosity, thereby offering a variety of applications, such as gas sorption and separation, homogeneous catalysis, energy storage, and so forth. In this research, canopies with varying structures were utilized to modify porous silica nanoparticles to develop Type I PLs. According to experimental results, the molecular weight of canopies should be high enough to maintain the porous materials in the liquid state at room temperature. Characterization results revealed that PL_1_M2070 and PL_1_AC1815 displayed low viscosity and good fluidity. Both low temperature and high pressure positively influenced CO₂ capacity. The cavity occupancy resulted in poorer sorption capacity of PLs with branched canopies in comparison with that with linear canopies. Furthermore, the sorption capacity of PL_1_M2070 was 90.5% of the original CO₂ sorption capacity after 10 sorption/desorption cycles, indicating excellent recyclability.

Room-Temperature Synthesis of a Hollow Microporous Organic Polymer Bearing Activated Alkyne IR Probes for Nonradical Thiol-yne Click-Based Post-Functionalization

This work shows that hollow microporous organic polymer (H-MOP-A) with activated internal alkynes as IR probes can be prepared by template synthesis based on acyl Sonogashira-Hagihara coupling at room temperature. The H-MOP-A is a versatile platform in the main chain PSM based on nonradical thiol-yne click reaction. Moreover, an IR peak of internal alkynes in the H-MOP-A is very intense and could be utilized in the monitoring of thiol-yne click-based main chain PSM. The functionalized H-MOP-A with carboxylic acids (H-MOP-CA) showed efficient adsorption toward Ag⁺ ions. The resultant H-MOP-CA-Ag showed excellent performance in the CO₂ fixation to α-alkylidene cyclic compounds.

What Fluorine Can Do in CO2 Chemistry: Applications from Homogeneous to Heterogeneous Systems

CO₂ chemistry including capture and fixation has attracted great attention towards the aim of reducing the consumption of fossil fuels and CO₂ accumulation in the atmosphere. "CO₂ -philic" materials are required to achieve good performance owing to the intrinsic properties of the CO₂ molecule, that is, thermodynamic stability and kinetic inertness. In this respect, fluorinated materials have been deployed in CO₂ capture (physical and chemical pathway) or fixation (thermo- and electrocatalytic procedure) with good performances, including homogeneous (e. g., ionic liquids and small organic molecules) and heterogeneous counterparts (e. g., carbons, porous organic polymers, covalent triazine frameworks, metal-organic frameworks, and membranes). In this Minireview, these works are summarized and analyzed from the aspects of (1) the strategy used for fluorine introduction, (2) characterization of the targeted materials, (3) performance of the fluorinated systems in CO₂ chemistry, and comparison with the nonfluorinated counterparts, (4) the role of fluorinated functionalities in the working procedure, and (5) the relationship between performance and structural/electronic properties of the materials. The systematic summary in this Minireview will open new opportunities in guiding the design of "CO₂ -philic" materials and pave the way to stimulate further progress in this field.

A Role of Activators for Efficient CO2 Affinity on Polyacrylonitrile-Based Porous Carbon Materials

Herein, we investigated polyacrylonitrile (PAN)-based porous activated carbon sorbents as an efficient candidate for CO2 capture. In this research, an easy and an economical method of chemical activation and carbonization was used to generate activated PAN precursor (PAN-C) adsorbents. The influence of various activators including NaOH, KOH, K2CO3, and KNO3 on the textural features of PAN-C and their CO2 adsorption performance under different temperatures was examined. Among the investigated adsorbents, PANC-NaOH and PANC-KOH exhibited high specific surface areas (2,012 and 3,072 m2 g-1), with high microporosity (0.82 and 1.15 cm3 g-1) and large amounts of carbon and nitrogen moieties. The PAN-C activated with NaOH and KOH showed maximum CO2 uptakes of 257 and 246 mg g-1 at 273 K and 163 and 155 mg g-1 at 298 K, 1 bar, respectively, which was much higher as compared to the inactivated PAN-C precursor (8.9 mg g-1 at 273 K and 1 bar). The heat of adsorption (Q st) was in the range 10.81-39.26 kJ mol-1, indicating the physisorption nature of the CO2 adsorption process. The PAN-C-based activated adsorbents demonstrated good regeneration ability over repeated adsorption cycles. The current study offers a facile two-step fabrication method to generate efficient activated porous carbon materials from inexpensive and readily available PAN for use as CO2 adsorbents in environmental applications.

Functional Nanoporous Materials

This Special Issue on "Functional Nanoporous Materials" in the MDPI journal nanomaterials features seven original papers [...].

CO2 Capture With Absorbents of Tertiary Amine Functionalized Nano-SiO2

To improve CO2 adsorption performance of nanoparticle absorbents, a novel tertiary amine functionalized nano-SiO2 (NS-NR2) was synthesized based on the 3-aminopropyltrimethoxysilane (KH540) modified nano-SiO2 (NS-NH2) via methylation. The chemical structure and performances of the NS-NR2 were characterized through a series of experiments, which revealed that NS-NR2 can react with CO2 in water and nanofluid with low viscosity revealed better CO2 capture. The CO2 capture mechanism of NS-NR2 was studied by kinetic models. From the correlation coefficient, the pseudo second order model was found to fit well with the experiment data. The influencing factors were investigated, including temperature, dispersants, and cycling numbers. Results has shown the additional surfactant to greatly promote the CO2 adsorption performance of NS-NR2 because of the better dispersity of nanoparticles. This work proved that NS-NR2 yields low viscosity, high capacity for CO2 capture, and good regenerability in water. NS-NR2 with high CO2 capture will play a role in storing CO2 to enhanced oil recovery in CO2 flooding.