Structural Characterization and Digestibility of Curcumin Loaded Octenyl Succinic Nanoparticles

Understanding regulating effects of protein-anionic octenyl succinic anhydride-modified starch interactions on the structural, rheological, digestibility and release properties of starch

BACKGROUND

Proteins and anionic octenyl succinic anhydride (OSA)-modified starch (OSA-starch) are common ingredients in food systems. The interactions between OSA-starch and protein are found to alter the structural and functional properties of the protein-OSA-starch complexes. In this regard, the close understanding of the relationship among the molecular interactions between whey protein isolate (WPI) and OSA-high amylose corn starch (HAS), structure changes and rheological, digestibility and release properties of WPI-OSA-HAS was investigated.

RESULTS

The molecular interactions of WPI-OSA-HAS were significant for increasing the surface rough, solubility, storage modulus and loss modulus, but decreasing the R1047/1022 values. For the nutritional evaluation, the anti-digestibility of WPI-OSA-HAS was enhanced with increased resistant starch + slowly digestible starch contents and decreased equilibrium hydrolysis percentage and kinetic constant. During the digestion, part of the starch granule, OSA groups and WPI were lost, but the loss was lower than for OSA-HAS. Furthermore, the results of curcumin-loaded WPI-OSA-HAS in simulated gastrointestinal fluids demonstrated that curcumin could be gradually released to simulate colonic fluid. Notably, the interaction between WPI and OSA-HAS depended on the WPI concentration with the stronger molecular interactions obtained at 35% concentration.

CONCLUSION

These results provided important information concerning how to adjust the rheological, anti-digestibility and release properties of WPI-OSA-HAS through altering the electrostatic interactions and hydrophobic interactions of WPI-OSA-HAS. © 2024 Society of Chemical Industry.

Development of a dextrin-vitamin D3 micelle nanocarrier for the antimicrobial peptide LLKKK18 as a potential therapeutic agent for bone infections

In this work, an expedite synthesis was developed for a self-assembled micelle carrier for the antimicrobial peptide LL18. Covalent one-pot functionalization of dextrin with succinylated vitamin D3 and succinic anhydride produced an amphiphilic material that undergoes self-assembly into micelles in aqueous medium. Succinylated dextrin-vitamin D3 micelles were efficiently loaded with LL18 by electrostatic and hydrophobic interactions. Remarkably, the LL18-loaded micelle formulation dramatically improves the antibacterial activity of free LL18 against S. aureus, completely abrogates its severe hemolytic activity, redirects the internalization of LL18 from the perinuclear region of osteoblasts to the lysosomes and reduces cellular toxicity towards osteoblasts and macrophages. Overall, this work demonstrates that self-assembled micelle formulations based on dextrin, vitamin D3 and antimicrobial peptides, are promising platforms to develop multifunctional antibiotic-independent antimicrobial agents, not prone to the development of bacterial resistance, to treat bone infections.

OSA modified porous starch acts as an efficient carrier for loading and sustainedly releasing naringin

To select an efficient carrier for loading and sustainedly releasing naringin (NAR), complexes of porous starch (PS) and NAR (PS-NAR) as well as those of octenyl succinic anhydride (OSA) esterified PS and NAR (OSAPS-NAR) with different degree of substitution (DS) were prepared by an ultrasonic method with an ethanol solution. The micro-morphological features, structural and thermal properties of complexes and their constituents were characterized, and in vitro release rate and kinetic of NAR from complexes were investigated. The findings revealed that NAR was successfully loaded in PS/OSAPS in an amorphous form, and the NAR's loading efficiency improved as DS increased, reaching 86.85 % at DS 0.0427. NAR cumulative release rate from the complexes in simulated digestion fluids was much higher than that of free (unloaded) NAR, but decreased as DS increased. NAR's in vitro release from complexes mainly depended on the carrier rather than NAR itself, and OSAPS with higher DS had stronger protection and slower release effect on NAR. The results would provide a new means for starch-based carrier construction to develop an efficient delivery and sustainedly releasing system for NAR, thus broadening the application ranges both for modified starch and citrus flavonoids such as NAR.

Encapsulation of chrysin and rutin using self-assembled nanoparticles of debranched quinoa, maize, and waxy maize starches

Chrysin and rutin are natural polyphenols with multifaceted biological activities but their applications face challenges in bioavailability. Encapsulation using starch nanoparticles (SNPs) presents a promising approach to overcome the limitations. In this study, chrysin and rutin were encapsulated into self-assembled SNPs derived from quinoa (Q), maize (M), and waxy maize (WM) starches using enzyme-hydrolysis. Encapsulation efficiencies ranged from 74.3 % to 79.1 %, with QSNPs showing superior performance. Simulated in vitro digestion revealed sustained release and higher antioxidant activity in QSNPs compared to MSNPs and WMSNPs. Variations in encapsulation properties among SNPs from different sources were attributed to the differences in the structural properties of the starches. The encapsulated SNPs exhibited excellent stability, retaining over 90 % of chrysin and 85 % of rutin after 15 days of storage. These findings underscore the potential of SNP encapsulation to enhance the functionalities of chrysin and rutin, facilitating the development of fortified functional foods with enhanced bioavailability and health benefits.

Porous corn starch granules as effective host matrices for encapsulation and sustained release of curcumin and resveratrol

Type 2 Diabetes Mellitus (T2DM) is a carbohydrate-rich diet-regulated ailment with carbohydrates digested and absorbed rapidly. Hence, modulating carbohydrate digestion is warranted; to this end, polyphenols from plant sources are handy. However, polyphenols' instability and low bioavailability limit their wholesome use, and thus, encapsulating them into an inexpensive and suitable wall material would be the best strategy. Herein, the potential of porous starch granules is demonstrated. Curcumin and resveratrol were chosen as the test polyphenols due to their proven health benefits, and porous corn starch granules were chosen as the wall material. Porous corn starch granules were prepared through enzymatic modification with 11, 22, and 33 units of amyloglucosidase at three reaction times of 2, 4, and 6 h. The polyphenols were loaded at 100, 200, and 500 mg concentrations in 1 g of starch for 21 days and were characterized through Scanning Electron Microscope (SEM) and Fourier Transform Infrared spectroscopy (FTIR) analyses. The encapsulation efficiency was determined, the rate of starch digestion was calculated through the Englyst test, and polyphenols' in vitro release behavior in gastric and intestinal fluids was measured. Results suggest that 33 enzyme units for a 2 h reaction time were optimal for forming spherical-oval pores on corn starch granules with the maximum encapsulation efficiency of 80.16 % and 88.33 % for curcumin and resveratrol, respectively. The FTIR results suggest the entrapment of polyphenols inside the starch matrix. The inclusion significantly reduced starch digestion and increased the percentage of resistant starch up to 41.11 % and 66.36 % with curcumin and resveratrol, respectively. The in vitro release behavior demonstrated good stability in the simulated gastric fluids and sustained release in simulated intestinal fluids. The encapsulated polyphenols showed a complex Fickian type of diffusion mechanism. Overall, the results suggest that porous corn starch granules could be a potential delivery system for curcumin and resveratrol and will aid in developing novel functional foods to address the T2DM concerns.

Influence of the structure and physicochemical properties of OSA modified highland barley starch based on ball milling assisted treatment

This study aimed to investigate the influence of ball milling assisted treatment on the degree of substitution of octenyl succinic anhydride (OSA) modified highland barley starch (HBS) and on the physicochemical properties and structure of HBS. Scanning electron microscopy (SEM) findings showed that with the increasing of ball milling time, the surface morphology of OSA modified HBS became rougher and rougher and the particle morphology and crystal structure were damaged. When the pretreatment time of ball milling was 40 min, the degree of substitution of OSA modified HBS was 1.32 times higher than that of the conventional modification method. In addition, the longer the ball milling assistant, the longer the short-range ordering of the OSA modified HBS significantly decreased, and the relative crystallinity decreased (from 16.68 % to 7.93 %), leading to a decrease in thermal stability too. However, it greatly enhanced the aging resistance and flowability. In terms of emulsification properties, the emulsification properties of OSA modified HBS increased from 60.67 % to 75.67 %. Therefore, the HBS with better freeze-thaw stability and higher degree of substitution can be prepared by ball milling pretreatment and OSA modification, which provides technical support for further development of starch resources.

Hydrophobic modified agar: Structural characterization and application in encapsulation and release of curcumin

In this study, three kinds of anhydrides with different structures were introduced into agar molecules to study the effects of varying degrees of substitution (DS) and anhydride structures on the physicochemical properties and curcumin (CUR) loading capacity. Increasing the carbon chain length and saturation of the anhydride affects the hydrophobic interaction and hydrogen bonding of the esterified agar, thereby changing the stable structure of the agar. Although the gel performance declined, the hydrophilic carboxyl group and the loose porous structure provide more binding sites for the adsorption of water molecules, hence providing excellent water retention (1700 %). Next, CUR was used as a hydrophobic active ingredient to study agar microspheres' drug encapsulation and in vitro release ability. Results showed that the excellent swelling and hydrophobic structure of esterified agar could promote the encapsulation of CUR (70.3 %). The release process is controlled by pH, and the release of CUR under weak alkaline conditions is significant, which can be explained by the pore structure, swelling characteristics, and carboxyl binding of agar. Therefore, this study shows the application potential of hydrogel microspheres in loading hydrophobic active ingredients and sustained release and provides the possibility for the application of agar in drug delivery systems.

Antioxidant polysaccharide/gelatin blend films loaded with curcumin - A comparative study

Curcumin (CUR; 0, 0.005, 0.01, 0.02 %) was loaded into binary 75/25 blend films based on polysaccharides (carboxymethyl cellulose (CMC), gum Arabic (GAR), octenyl succinic anhydride modified starch (OSA), water-soluble soy polysaccharides (WSSP)) and gelatin (GEL). The GAR-based system was the least rough and, consequently, the most transparent of the films. An opposite result was found for the WSSP-based film. Despite the phase separation, the CMC75/GEL25 film exhibited excellent mechanical strength and stiffness. CUR improved the UV/VIS light-barrier characteristics of the films, but did not affect most of other physiochemical properties. X-ray diffractograms revealed that CUR provoked the rearrangement of the triple helical structure of GEL. As highly erodible, the CMC75/GEL25 carrier ensured the fastest and the most complete release of CUR. The OSA75/GEL25 system exhibited an opposite behavior. The kinetic profiles of the antiradical activity of the films did not reflect CUR release. A comparison of 2,2-diphenyl-1-picrylhydrazyl (DPPH*) scavenging on the plateau revealed that the CUR-supplemented films had quite comparable antiradical potential. The CMC75/GEL25 system exhibited the highest colorimetric stability, likely as a result of complete encapsulation of CUR in the GEL-rich microspheres. Weak symptoms of physical aging (enthalpy relaxation) were found in the films.

Recent advances of octenyl succinic anhydride modified polysaccharides as wall materials for nano-encapsulation of hydrophobic bioactive compounds

Polysaccharides can be esterified with octenyl succinic anhydride (OSA) to form derivatives with amphiphilic properties. The general preparation methods of OSA-polysaccharides are described, especially the aqueous method. The new hydrophobic groups introduced result in OSA-polysaccharides showing higher interfacial properties, better emulsifying stability, higher viscosity, and lower digestibility. There have been advances in the development of OSA-polysaccharides-based nano-encapsulation systems for hydrophobic bioactive compounds in recent years. Nano-encapsulation systems are formed through nanoemulsions, nanocapsules, nanoparticles, micelles, vesicles, molecular inclusion complexes, and so on. This review aims to describe the preparation methods, the structure characterizations, and the physicochemical properties of OSA-polysaccharides as encapsulating agents. In addition, the focus is on the different nano-encapsulation systems based on OSA-polysaccharides as wall materials. Future perspectives will concern OSA-polysaccharides-based nano-encapsulation systems with optimized functional properties for providing higher bioavailability and targeted delivery of various hydrophobic bioactive compounds. © 2022 Society of Chemical Industry.

Fabrication and characterization of octenyl succinic anhydride modified pullulan micelles for encapsulating curcumin

BACKGROUND

Curcumin has become increasingly popular in functional foods and beverages field as a result of its high biological activity. Nevertheless, the application of curcumin is usually limited by its poor water solubility, low absorption, rapid metabolism and instability. Accordingly, the development of an appropriate wall material is crucial for its effective use. In the present study, curcumin-octenyl succinic anhydride modified pullulan (Cur-OSAP) micelles were successfully prepared by an anti-solvent co-precipitation method.

RESULTS

Octenyl succinic anhydride modified pullulan (OSAP) micelles exhibited the highest encapsulation efficiency (57.31%) and loading capacity (5.73%) of curcumin when the mass ratio of OSAP to curcumin was 10:1 and the degree of substitution of OSAP was 0.0469, at which point Cur-OSAP micelles formed via hydrogen binding and hydrophobic interactions, as confirmed by Fourier transform infrared and fluorescence techniques. The transmission electron microscopy results showed that the Cur-OSAP micelles were roughly spherical in shape with diameters in the approximate range 30-60 nm.

CONCLUSION

The encapsulation of OSAP greatly improved photostability and sustained release properties of curcumin in Cur-OSAP micelles. These findings suggest that OSAP can be used as a carrier to encapsulate and protect hydrophobic food ingredients. © 2021 Society of Chemical Industry.

Preparation and physiochemical properties of enzymatically modified octenyl succinate starch

The high viscosity and low solubility of octenyl succinate starch (OSAS) in water often lead to low reaction efficiency and uneven distribution of OSA groups, which can be solved by subjecting OSA starch to enzymatic digestion. Waxy corn starch is used to produce OSAS. The molecular weight of enzymolysis modified octenyl succinate starches (E-OSAS) decreased with the addition of enzyme, and the substitution of enzymatically digested OSAS was larger than that of OSAS. As the addition of pullulanase increased, the substitution of E-OSAS tended to increase and the apparent viscosity decreased significantly. The smaller its particle size and polydispersity index (PDI), the larger the absolute value of the zeta potential. E₄₀ -OSAS with the smallest particle size and best homogeneity and stability had the smallest weight average molecular weight (1.38 × 10⁶  g/mol), the smallest number average molecular weight (1.37 × 10⁵  g/mol), and the largest degree of substitution of 0.019. The E-OSAS has not been investigated deeply enough, and the enzymatic treatment by pullulanase is not much studied, so this study is of great importance to provide some basis for the research of new microcapsules. PRACTICAL APPLICATION: This work aims to provide wall materials with lower viscosity and better encapsulation properties for the food industry. Waxy corns starch is used to manufacture OSAS. This wall material is a partly biodegradable material that is hydrophilic on the outside and hydrophobic on the inside, and its preparation process is in line with the concept of green chemistry.

Nanocomposites: Nanoscience and Nanotechnology (Nanoscale Phenomena) in Advanced Composites

Nanocomposites can be viewed as abundant interface nanoscale systems having the ability to manipulate length scales that are fundamentally important to many physical properties [...].

Sodium starch octenyl succinate facilitated the production of water-soluble yellow pigments in Monascus ruber fermentation

Natural water-soluble Monascus pigments (WSMPs) have been in increasing demand but have not been able to achieve industrial production due to the low production rate. This study aimed to improve the biosynthesis and secretion of extracellular yellow pigments (EYPs) through submerged fermentation with Monascus ruber CGMCC 10,910 supplemented with sodium starch octenyl succinate (OSA-SNa). The results demonstrated that the yield was 69.68% and 48.89% higher than that without OSA-SNa in conventional fermentation (CF) and extractive fermentation (EF), respectively. The mainly increased EYP components were Y3 and Y4 in CF, but they were mainly Y1 and Y2 as well as secreted intracellular pigments, including Y5, Y6, O1, and O2, in EF. Scanning electron microscopy analysis revealed that the mycelium presented an uneven surface profile with obvious wrinkles and small fragments with OSA-SNa. It was found that a higher unsaturated/saturated fatty acids ratio in the cell membrane resulted in increased permeability and facilitated the export of intracellular yellow pigments into the broth with OSA-SNa treatment. In addition, a higher NAD⁺/NADH ratio and glucose-6-phosphate dehydrogenase activity provided a reducing condition for yellow pigment biosynthesis. Gene expression analysis showed that the expression levels of the key genes for yellow pigment biosynthesis were significantly upregulated by OSA-SNa. This study provides an effective strategy to promote the production of WSMPs by microparticle-enhanced cultivation using OSA-SNa. KEY POINTS: • OSA-SNa addition facilitated the production of Monascus yellow pigments. • Mycelial morphology and membrane permeability were affected by OSA-SNa. • The key gene expression of yellow pigments was upregulated.

Polysaccharide Matrices for the Encapsulation of Tetrahydrocurcumin-Potential Application as Biopesticide against Fusarium graminearum

Cereals are subject to contamination by pathogenic fungi, which damage grains and threaten public health with their mycotoxins. Fusarium graminearum and its mycotoxins, trichothecenes B (TCTBs), are especially targeted in this study. Recently, the increased public and political awareness concerning environmental issues tends to limit the use of traditional fungicides against these pathogens in favor of eco-friendlier alternatives. This study focuses on the development of biofungicides based on the encapsulation of a curcumin derivative, tetrahydrocurcumin (THC), in polysaccharide matrices. Starch octenylsuccinate (OSA-starch) and chitosan have been chosen since they are generally recognized as safe. THC has been successfully trapped into particles obtained through a spray-drying or freeze-drying processes. The particles present different properties, as revealed by visual observations and scanning electron microscopy. They are also different in terms of the amount and the release of encapsulated THC. Although freeze-dried OSA-starch has better trapped THC, it seems less able to protect the phenolic compound than spray-dried particles. Chitosan particles, both spray-dried and lyophilized, have shown promising antifungal properties. The IC₅₀ of THC-loaded spray-dried chitosan particles is as low as 0.6 ± 0.3 g/L. These particles have also significantly decreased the accumulation of TCTBs by 39%.

Application of starch nanoparticles as host materials for encapsulation of curcumin: Effect of citric acid modification

To encapsulate curcumin, absolute ethanolic curcumin solution with various content (300-1200 μg) was added to aqueous dispersion of citric acid-modified starch nanoparticles (M.SNPs) with various contents (0.5-2.5%), and then ethanol of the mixture was evaporated by nitrogen gas purge for 40 min (ethanol content decreased to 1%). SNPs (100 mg) could encapsulate 75.7 μg of curcumin in matrices of the composite, while 100 mg of M.SNPs could encapsulate 144.9 μg of curcumin. The XRD results revealed that curcumin was amorphously encapsulated in the composite, and hydrogen bond formation between M.SNPs and curcumin was one of the major driving forces for encapsulation as suggested by FT-IR. The composites had a spherical shape and mean particle size of the composites was increased from 136.3 to 255.3 nm with higher curcumin content in the matrices of composites. UV, pH, and thermal stability of curcumin significantly enhanced by the encapsulation, which was further increased when using M.SNPs and/or higher content of host materials. For the release of curcumin in simulated intestinal fluid digestion, release mechanism explained by Korsmeyer-Peppas model. For M.SNPs, k value was decreased from 13.097 to 2.938 as addition level of host material increased from 0.5 to 2.5%.

Preparation and characterization of octenyl succinylated starch microgels via a water-in-oil (W/O) inverse microemulsion process for loading and releasing epigallocatechin gallate

Corn starch (CS), octenyl succinic anhydride modified corn starch (OSCS) and shells (OSC_s) microgels have been prepared using water-in-oil (W/O) inverse microemulsions for loading and releasing of epigallocatechin gallate (EGCG). The structural and morphological properties of CS, OSCS, and OSC_s microgels were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Transmission electron microscopy (TEM), and Thermogravimetric analysis (TGA). The strong hydrogen bonds between starch molecules in the W/O system and interplay between hydroxyl groups of EGCG and oxygen atoms of starch microgels were formed. OSC_s microgel showed low average particle size and weak thermal stability with an irregular shape and a typical V-type crystalline structure. Encapsulation efficiency (EE) and clearance rate of 2,2-diphenyl-1-picrylhydrazyl (DPPH) for EGCG were ranged between 41.78 and 63.89% and 75.53-85.37%, respectively, when absorbed into OSCS and OSC_s microgels, the values which were higher than that of CS microgel. Further, OS starch microgels (particularly OSC_s) modulated the slow release of EGCG into simulated gastrointestinal tract conditions and therefore could be proposed as an encapsulating agent for loading polyphenols.

Physicochemical Characterization of Bioactive Compounds in Nanocarriers

The encapsulation of bioactive compounds is an emerging technique for finding new medicines since it provides protection against ambient degradation factors before reaching the target site. Nanotechnology provides new methods for encapsulating bioactive compounds and for drug carrier development. Nanocarriers satisfactorily impact the absorption, distribution, metabolism, and excretion rate when compared to conventional carriers. The nanocarrier material needs to be compatible and bind to the drug and be bio-resorbable. In this context, the physicochemical characterization of encapsulated bioactive compounds is fundamental to guarantee the quality, reproducibility, and safety of the final pharmaceutical product. In this review, we present the physicochemical techniques most used today by researchers to characterize bioactive compounds in nanocarriers and the main information provided by each technique, such as morphology, size, degree of crystallinity, long-term stability, the efficacy of drug encapsulation, and the amount released as a function of time.