Micro-Nano Carbon Structures with Platelet, Glassy and Tube-Like Morphologies

Self-supported nickel-doped molybdenum carbide nanoflower clusters on carbon fiber paper for an efficient hydrogen evolution reaction

Developing an efficient, stable and low-cost noble-metal-free electrocatalyst for the hydrogen evolution reaction (HER) is an effective way to alleviate the energy crisis. Herein, we report a simple and facile approach to synthesize self-supported Ni-doped Mo₂C via a molten salt method. By optimizing the content of Ni, the concentration of Ni(NO₃)₂, and the annealing time, self-supported nanoflower-like electrocatalysts composed of ultrathin nanosheets on carbon fiber paper (CFP) can be achieved. Such a fluffy and porous nanoflower-like structure has a large specific surface area, which can expose many active sites, and promote charge transfer; moreover, all of the above is beneficial for improving the HER performance. Density functional theory (DFT) calculations reveal that the doping of Ni leads to a down shift of the value of the d band center (ε_d), so that the adsorbed hydrogen (H_ads) is easier to desorb from the catalyst surface, thus leading to an enhanced intrinsic catalytic activity of Ni doped Mo₂C based catalysts. As a result, Mo₂C-3 M Ni(NO₃)₂/CFP with a nanoflower-like structure prepared at 1000 °C for 6 h exhibits the best electrocatalytic performance for the HER in 0.5 M H₂SO₄, with a low overpotential of 56 mV (at j = 10 mA cm^-2) and a Tafel slope (27.4 mV dec^-1) comparable to that of commercial Pt/C (25.8 mV dec^-1). The excellent performance surpasses most of the noble-metal-free electrocatalysts. In addition, the outstanding long-term durability of Mo₂C-3 M Ni(NO₃)₂/CFP is demonstrated by showing no obvious fluctuations during 35 h of the HER testing. This work provides a simple and facile strategy for the preparation of nanoelectrocatalysts with high specific surface areas and high catalytic activities, both of which promote an efficient HER.

Catalytic Preparation of Carbon Nanotubes from Waste Polyethylene Using FeNi Bimetallic Nanocatalyst

In this work, carbon nanotubes (CNTs) were synthesized by catalytic pyrolysis from waste polyethylene in Ar using an in-situ catalyst derived from ferric nitrate and nickel nitrate precursors. The influence factors (such as temperature, catalyst content and Fe/Ni molar ratio) on the formation of CNTs were investigated. The results showed that with the temperature increasing from 773 to 1073 K, the carbon yield gradually increased whereas the aspect (length-diameter) ratio of CNTs initially increased and then decreased. The optimal growth temperature of CNTs was 973 K. With increasing the Fe/Ni molar ratio in an FeNi bimetallic catalyst, the yield of CNTs gradually increased, whereas their aspect ratio first increased and then decreased. The optimal usage of the catalyst precursor (Fe/Ni molar ratio was 5:5) was 0.50 wt% with respect to the mass of polyethylene. In this case, the yield of CNTs reached as high as 20 wt%, and their diameter and length were respectively 20–30 nm, and a few tens of micrometers. The simple low-cost method developed in this work could be used to address the environmental concerns about plastic waste, and synthesize high value-added CNTs for a range of future applications.